Rolling-contact fatigue and wear resistance of hard coatings on bearing-steel substrates

[1]  P. K. Pearson,et al.  Surface-initiated spalling fatigue in M-50 and M-50 NiL bearings , 1991 .

[2]  H. Ishii,et al.  An Analysis of Deformation of Steel Coated With Ceramics in Rolling-Sliding Contact , 1991 .

[3]  John J. Pouch,et al.  Plasma-Deposited Amorphous Hydrogenated Carbon Films and Their Tribological Properties , 1991 .

[4]  Herbert S. Cheng,et al.  The influence of coating thickness on lubricated rolling contact fatigue life , 1990 .

[5]  S A Stoneman,et al.  Correlation of Breath Sounds with Diagnoses of Lung Dysfunction: Experimental Observations , 1989, Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine.

[6]  Herbert S. Cheng,et al.  Loss of adhesion of a layer bonded to an elastic half space caused by a concentrated contact , 1989 .

[7]  R. Thom,et al.  High current density ion implantation processing of 440C steel Part 1: Implantation parameters and rolling contact fatigue improvement , 1989 .

[8]  A. Erdemir,et al.  Surface metallurgical and tribological characteristics of TiN-coated bearing steels , 1988 .

[9]  Kyriakos Komvopoulos,et al.  Finite element analysis of a layered elastic solid in normal contact with a rigid surface , 1988 .

[10]  R. A. Khrunik,et al.  Contact fatigue of high-speed steel with wear-resistant nitride coatings in a corrosive medium , 1987 .

[11]  P. Sioshansi.  Surface modification of industrial components by ion implantation , 1987 .

[12]  N. Suh,et al.  The role of hard layers in lubricated and dry sliding , 1987 .

[13]  R. Maurer.  Friction, wear, and corrosion control in rolling bearings through coatings and surface modification: A review , 1986 .

[14]  A. Erdemir.  A study of surface metallurgical characteristics of tin coated bearing steels , 1986 .

[15]  R. Thom,et al.  Rolling contact fatigue behavior of Cu and TiN coatings on bearing steel substrates , 1985 .

[16]  M. Hirano,et al.  The Reduction of Adhesion by Ion Implantation , 1985 .

[17]  A. P. Voskamp.  Material Response to Rolling Contact Loading , 1985 .

[18]  F. A. Smidt.  Recent advances in the application of ion implantation to corrosion and wear protection , 1985 .

[19]  I. L. Singer,et al.  Friction behavior of 52100 steel modified by ion implanted Ti , 1981 .

[20]  W. H. Lucke,et al.  Applications of ion implantation for the improvement of localized corrosion resistance of M50 bearing steel , 1979 .

[21]  E. N. Bamberger,et al.  Endurance and Failure Characteristic of Main-Shaft Jet Engine Bearing at 3 × 106 DN , 1976 .

[22]  J. P. Stroup,et al.  Improved M50 Aircraft Bearing Steel through Advanced Vacuum Melting Processes , 1972 .

[23]  T. E. Tallian,et al.  An engineering model of spalling fatigue failure in rolling contact , 1971 .

[24]  T. Tallián,et al.  An engineering model of spalling fatigue failure in rolling contact. II. The surface model , 1971 .

[25]  J. A. Martin,et al.  Identification of Potential Failure Nuclei in Rolling Contact Fatigue , 1967 .

[26]  K. Johnson,et al.  An Analysis of Plastic Deformation in Rolling Contact , 1963 .

[27]  J. F. Braza,et al.  Rolling contact fatigue and sliding wear performance of ferritic nitrocarburized M-50 steel , 1992 .

[28]  Herbert S. Cheng,et al.  A Comparison of Fatigue Failure Morphology Between TiN Coated and Uncoated Lubricated Rollers , 1991 .

[29]  B. L. Averbach,et al.  Analysis of bearing incidents in aircraft gas turbine mainshaft bearingsc , 1991 .

[30]  R. M. Middleton,et al.  Effect of Coatings on Rolling Contact Fatigue Behaviour of MSO Bearing Steel , 1991 .

[31]  P. Wilbur,et al.  A tribological investigation of the graphite-to-diamond-like behavior of amorphous carbon films ion beam deposited on ceramic substrates☆ , 1991 .

[32]  J. W. Kannel,et al.  Analyses of the Role of Surface Roughness on Contact Stresses Between Elastic Cylinders With and Without Soft Surface Coating , 1989 .

[33]  M. Misra,et al.  Effects of Ion Implantation on the Rolling Contact Fatigue of 440C Stainless Steel , 1983 .

[34]  En Bamberger,et al.  Development and Application of the Rolling Contact Fatigue Test Rig , 1982 .

[35]  W. Anderson,et al.  Investigation of Factors Governing Fatigue Life with the Rolling-Contact Fatigue Spin Rig , 1958 .