Energy absorbtion and mean crushing load of thin-walled grooved tubes under axial compression

In the present study, crashworthiness characteristics of thin-walled steel tubes containing annular grooves are studied. For this purpose, the grooves are introduced in the tube to force the plastic deformation to occur at predetermined intervals along the tube. The aims are controlling the buckling mode and predicting energy absorption capacity of the tubes. To do so, circumferential grooves are cut alternately inside and outside of the tubes at predetermined intervals. Quasi-static axial crushing tests are performed and the load-displacement curves are studied. Theoretical formulations are presented for predicting the energy absorption and mean crushing load. It is found a good agreement between the theoretical results and experimental findings. The results indicate that the load-displacement curve and energy absorbed by the axial crushing of tubes could be controlled by the introduction of grooves with different distances. Also, grooves can stabilize the deformation behavior and thus, the proposed method could be a good candidate as a controllable energy absorption element.

[1]  A. A. Singace,et al.  Behaviour of axially crushed corrugated tubes , 1997 .

[2]  Athanasios G. Mamalis,et al.  The modelling of the progressive extensible plastic collapse of thin-wall shells , 1988 .

[3]  J. M. Alexander.  AN APPROXIMATE ANALYSIS OF THE COLLAPSE OF THIN CYLINDRICAL SHELLS UNDER AXIAL LOADING , 1960 .

[4]  S. Reid,et al.  Static and dynamic crushing of tapered sheet metal tubes of rectangular cross-section , 1986 .

[5]  Norman Jones,et al.  Dynamic and static axial crushing of axially stiffened cylindrical shells , 1990 .

[6]  Stephen R Reid,et al.  Energy absorbing capacities of braced metal tubes , 1983 .

[7]  Athanasios G. Mamalis,et al.  Axial plastic collapse of thin bi-material tubes as energy dissipating systems , 1991 .

[8]  Athanasios G. Mamalis,et al.  The axial crushing of thin PVC tubes and frusta of square cross-section , 1989 .

[9]  S. Reid.  PLASTIC DEFORMATION MECHANISMS IN AXIALLY COMPRESSED METAL TUBES USED AS IMPACT ENERGY ABSORBERS , 1993 .

[10]  A. G Mamalis,et al.  The quasi-static crumpling of thin-walled circular cylinders and frusta under axial compression , 1983 .

[11]  S. Reid,et al.  METALLIC ENERGY DISSIPATING SYSTEMS. , 1978 .

[12]  S. L. Rice,et al.  Impact strength of materials , 1972 .

[13]  S. K. Gupta,et al.  Effect of annealing, size and cut-outs on axial collapse behaviour of circular tubes , 1993 .

[14]  M. N. Nahas.  Impact energy dissipation characteristics of thin-walled cylinders , 1993 .