Properties of concrete incorporating high volumes of class F fly ash and san fibers

Abstract The results of an experimental investigation to study the effects of replacement of cement (by mass) with three percentages of fly ash and the effects of addition of natural san fibers on the slump, Vebe time, compressive strength, splitting tensile strength, flexural strength and impact strength of fly ash concrete are presented. San fibers belong to the category of “natural bast fibers.” It is also known as “sunn hemp.” Its scientific (botanical) name is Crotalaria juncea . It is mostly grown in the Indian subcontinent, Brazil, eastern and southern Africa and some parts of the United States (Hawaii and Florida). A control mixture of proportions 1:1.4:2.19 with W/Cm of 0.47 and superplasticizer/cementitious ratio of 0.015 was designed. Cement was replaced with three percentages (35%, 45% and 55%) of class F fly ash. Three percentages of san fibers (0.25%, 0.50% and 0.75%) having 25-mm length were used. The test results indicated that the replacement of cement with fly ash increased the workability (slump and Vebe time), decreased compressive strength, splitting tensile strength and flexural strength and had no significant effect on the impact strength of plain (control) concrete. Addition of san fibers reduced the workability, did not significantly affect the compressive strength, increased the splitting tensile strength and flexural strength and tremendously enhanced the impact strength of fly ash concrete as the percentage of fibers increased.