Characterization of the effect of normal load on the discontinuity morphology in direct shear specimens using X-ray micro-CT

Discontinuities in brittle geomaterials, including concrete and rock, represent localized zones of weakness and enhanced hydraulic transmissivity that often control the hydromechanical behavior of the medium. The shearing of discontinuities and the resulting morphological changes can significantly alter this behavior. In this work, a procedure is developed to characterize sheared discontinuity replicas as a function of the applied normal load using X-ray micro-computed tomography (micro-CT) imagery. A specimen design and testing procedure that facilitates CT scanning is presented along with an image processing procedure to quantify the morphological changes in the specimens. Subsequently, the results of direct shear testing and image-based measurements of mean fracture aperture, surface area, median effective aperture, and the preferential orientation of fracture void space are presented and discussed. Application of the procedure developed herein yields characteristics of the morphology of sheared discontinuities that were previously not possible to obtain or that were time consuming to collect with destructive sectioning methods.

[1]  Nick Barton,et al.  Experimental studies of scale effects on the shear behaviour of rock joints , 1981 .

[2]  Abhijit G. Shanbhag,et al.  Utilization of Information Measure as a Means of Image Thresholding , 1994, CVGIP Graph. Model. Image Process..

[3]  R. Ketcham,et al.  Acquisition, optimization and interpretation of X-ray computed tomographic imagery: applications to the geosciences , 2001 .

[4]  B. Berkowitz.  Characterizing flow and transport in fractured geological media: A review , 2002 .

[5]  Carlo D. Montemagno,et al.  Volumetric imaging of aperture distributions in connected fracture networks , 1997 .

[6]  Steven K. Boyd,et al.  Micro-Computed Tomography , 2009 .

[7]  Giovanni Grasselli,et al.  Trapping zones: The effect of fracture roughness on the directional anisotropy of fluid flow and colloid transport in a single fracture , 2006 .

[8]  M. H. Freitas,et al.  Mechanisms of shear failure in artificial fractures of sandstone and their implication for models of hydromechanical coupling , 1993 .

[9]  J. Gale,et al.  Comparison of coupled fracture deformation and fluid flow models with direct measurements of fracture pore structure and stress-flow properties , 1987 .

[10]  John A. Hudson,et al.  Engineering rock mechanics , 1997 .

[11]  N. P. Christensen,et al.  Variations in fracture system geometry and their implications for fluid flow in fractures hydrocarbon reservoirs , 1999, Petroleum Geoscience.

[12]  A. Ghazvinian,et al.  Importance of Tensile Strength on the Shear Behavior of Discontinuities , 2012, Rock Mechanics and Rock Engineering.

[13]  P. Christe.  Geological characterization of cataclastic rock samples using medical X-ray computerized tomography , 2009 .

[14]  Erdinc Eker,et al.  Lattice Boltzmann Simulation of Fluid Flow in Synthetic Fractures , 2006 .

[15]  Nick Barton,et al.  Review of predictive capabilities of JRC-JCS model in engineering practice , 1991 .

[16]  Nick Barton,et al.  Joint conductivity variation due to normal and shear deformation , 1991 .

[17]  Harold Auradou,et al.  Permeability anisotropy induced by the shear displacement of rough fracture walls , 2005 .

[18]  Marc Boulon,et al.  Evaluation of shear strength of rock joints subjected to cyclic loading , 2003 .

[19]  Y. Tsang,et al.  The Effect of Tortuosity on Fluid Flow Through a Single Fracture , 1984 .

[20]  J. Koplik,et al.  Flow channeling in a single fracture induced by shear displacement , 2006, physics/0603058.

[21]  G. Grasselli,et al.  Quantitative Measurements of Fracture Aperture and Directional Roughness from Rock Cores , 2012, Rock Mechanics and Rock Engineering.

[22]  Eva Hakami,et al.  Aperture measurements and flow experiments on a single natural fracture , 1996 .

[23]  Sergio Fantini,et al.  Spatial second-derivative image processing: an application to optical mammography to enhance the detection of breast tumors. , 2003, Journal of biomedical optics.

[24]  Jiang Hsieh,et al.  Computed Tomography: Principles, Design, Artifacts, and Recent Advances, Fourth Edition , 2022 .

[25]  D. Deere,et al.  Engineering classification and index properties for intact rock , 1966 .

[26]  Nick Barton,et al.  Review of a new shear-strength criterion for rock joints , 1973 .

[27]  F. Lanaro.  A random field model for surface roughness and aperture of rock fractures , 2000 .

[28]  Eric N. Landis,et al.  X-ray Tomography as a Tool for Micromechanical Investigations of Cement and Mortar , 2010 .

[29]  Jos B. T. M. Roerdink,et al.  The Watershed Transform: Definitions, Algorithms and Parallelization Strategies , 2000, Fundam. Informaticae.

[30]  Stephen R. Brown,et al.  Broad bandwidth study of the topography of natural rock surfaces , 1985 .

[31]  Ian W. Johnston,et al.  A mechanistically-based model for rough rock joints , 1994 .

[32]  P. Baud,et al.  Characterization of pore-space heterogeneity in sandstone by X-ray computed tomography , 2007 .

[33]  Chris A. Glasbey,et al.  An Analysis of Histogram-Based Thresholding Algorithms , 1993, CVGIP Graph. Model. Image Process..

[34]  Mostafa Sharifzadeh,et al.  Rock Joint Surfaces Measurement and Analysis of Aperture Distribution under Different Normal and Shear Loading using GIS , 2006 .

[35]  A. Aydin,et al.  Shear fracture patterns and connectivity at geometric complexities along strike‐slip faults , 1995 .

[36]  Mao-Jiun J. Wang,et al.  Image thresholding by minimizing the measures of fuzzines , 1995, Pattern Recognit..

[37]  Stephen R. Brown,et al.  Hydromechanical response of a fracture undergoing compression and shear , 1993 .

[38]  John C. Russ,et al.  The Image Processing Handbook , 2016, Microscopy and Microanalysis.

[39]  Claudio Scavia,et al.  Determination of contact areas in rock joints by X-ray computer tomography , 1999 .

[40]  Sandra J Shefelbine,et al.  BoneJ: Free and extensible bone image analysis in ImageJ. , 2010, Bone.

[41]  S. Gentier,et al.  Laboratory testing of the voids of a fracture , 1989 .

[42]  J. C. Jaeger.  Friction of Rocks and Stability of Rock Slopes , 1971 .

[43]  W. Pratt.  Digital Image Processing: Piks Scientific Inside , 1978 .

[44]  M. Nasseri,et al.  Analysis of fracture damage zone in anisotropic granitic rock using 3D X-ray CT scanning techniques , 2011 .

[45]  M. Boulon,et al.  A new device for investigating the hydro‐mechanical properties of rock joints , 2003 .

[46]  William E. Lorensen,et al.  Marching cubes: A high resolution 3D surface construction algorithm , 1987, SIGGRAPH.

[47]  Steven W. Smith,et al.  The Scientist and Engineer's Guide to Digital Signal Processing , 1997 .

[48]  J. Otani,et al.  Xray CT for Geomaterials: Soils, Concrete, Rocks International Workshop on Xray CT for Geomaterials, Kumamoto, Japan , 2004 .

[49]  H. Gerçek,et al.  Poisson's ratio values for rocks , 2007 .

[50]  Pinnaduwa Kulatilake,et al.  New peak shear strength criteria for anisotropic rock joints , 1995 .

[51]  R. Meuli,et al.  An X-ray computed tomography-based index to characterize the quality of cataclastic carbonate rock samples , 2011 .

[52]  Ian W. Johnston,et al.  SHEAR BEHAVIOR OF REGULAR TRIANGULAR CONCRETE/ROCK JOINTS - EVALUATION , 1989 .

[53]  T. Pan.  Computed Tomography: from Photon Statistics to Modern Cone-Beam CT , 2009, Journal of Nuclear Medicine.

[54]  N. Barton,et al.  Strength, deformation and conductivity coupling of rock joints , 1985 .

[55]  L. Jing,et al.  Shear-Induced Flow Channels in a Single Rock Fracture and Their Effect on Solute Transport , 2011 .

[56]  Jun Otani,et al.  X-ray CT for geomaterials : soils, concrete, rocks : proceedings of the international workshop on X-ray CT for geomaterials, geox2003, 6-7 November 2003, Kumamoto, Japan , 2004 .

[57]  S Succi,et al.  Two-dimensional lattice Boltzmann simulation of colloid migration in rough-walled narrow flow channels. , 2008, Physical review. E, Statistical, nonlinear, and soft matter physics.

[58]  C. H. Li,et al.  An iterative algorithm for minimum cross entropy thresholding , 1998, Pattern Recognit. Lett..

[59]  K. R. Saxena,et al.  In-Situ Characterization of Rocks , 2002 .

[60]  Luc Vincent,et al.  Watersheds in Digital Spaces: An Efficient Algorithm Based on Immersion Simulations , 1991, IEEE Trans. Pattern Anal. Mach. Intell..

[61]  P. A. Witherspoon,et al.  Hydraulic And Mechanical Properties of Natural Fractures In Low Permeability Rock , 1987 .

[62]  P. R. Sheorey.  Empirical Rock Failure Criteria , 1997 .

[63]  Stephen R. Brown,et al.  Fluid flow through rock joints: The effect of surface roughness , 1987 .

[64]  Giovanni Grasselli,et al.  Constitutive law for the shear strength of rock joints based on three-dimensional surface parameters , 2003 .

[65]  Chin-Fu Tsang,et al.  Flow channeling in a single fracture as a two‐dimensional strongly heterogeneous permeable medium , 1989 .

[66]  R. A. Johns,et al.  Nondestructive measurements of fracture aperture in crystalline rock cores using X ray computed tomography , 1993 .

[67]  Avinash C. Kak,et al.  Principles of computerized tomographic imaging , 2001, Classics in applied mathematics.

[68]  Paul A. Witherspoon,et al.  The relationship of the degree of interconnection to permeability in fracture networks , 1985 .

[69]  Veerle Cnudde,et al.  3D characterization of sandstone by means of X-ray computed tomography , 2011 .

[70]  N. Otsu.  A threshold selection method from gray level histograms , 1979 .

[71]  F. Patton.  Multiple Modes of Shear Failure In Rock , 1966 .

[72]  Robert W. Zimmerman,et al.  Effect of shear displacement on the aperture and permeability of a rock fracture , 1998 .

[73]  Marc Boulon,et al.  Influence of rock joint degradation on hydraulic conductivity , 1993 .

[74]  Phillip M. Halleck,et al.  X-ray CT and hydraulic evidence for a relationship between fracture conductivity and adjacent matrix porosity , 2009 .

[75]  Ching S. Chang,et al.  Experimental and mathematical modeling for fracture of rock joint with regular asperities , 2002 .

[76]  R. Ketcham,et al.  Three-dimensional measurement of fractures in heterogeneous materials using high-resolution X-ray computed tomography , 2010 .

[77]  Lucia Mancini,et al.  Quantitative analysis of X-ray microtomography images of geomaterials: Application to volcanic rocks , 2010 .