An analytical study of the pulsed thermography defect detection limit

A simple modification of the one-dimensional expression for the thermal contrast of a layer provides a useful prediction of peak contrast temperature and contrast peak time for defects of all aspect ratios. The new analytical results have been shown to agree with numerical modelling. The thermographic nondestructive evaluation (NDE) rule-of-thumb that defects are detected if aspect ratio exceeds two is shown to have no general validity as peak contrast is found to depend critically on defect depth and absorbed excitation energy as well as defect aspect ratio. The effects of thermal diffusivity anisotropy are included in the analysis and illustrated by simulations of defect image contrast in composite materials.

[1]  Bruce A. Rubadeux,et al.  Reconstruction and enhancement of active thermographic image sequences , 2003 .

[2]  Darryl P Almond,et al.  Defect sizing by transient thermography. I. An analytical treatment , 1994 .

[3]  James R. Lhota,et al.  Flash thermography contrast model based on IR camera noise characteristics , 2007 .

[4]  I. H. Marshall,et al.  NDTE using pulse thermography : Numerical modeling of composite subsurface defects , 2006 .

[5]  Vladimir P. Vavilov.  Accuracy of thermal NDE numerical simulation and reference signal evolutions , 1999, Defense, Security, and Sensing.

[6]  J. M. Milne,et al.  The Non-Destructive Evaluation Of Composites And Other Materials By Thermal Pulse Video Thermography , 1985, Other Conferences.

[7]  James R. Lhota,et al.  Automated processing of thermographic derivatives for quality assurance , 2007 .

[8]  C A Bennett,et al.  Thermal wave interferometry: a potential application of the photoacoustic effect. , 1982, Applied optics.

[9]  J. M. Milne,et al.  Application Of Thermal Pulses And Infrared Thermal Imagers For Observing Sub-Surface Structures In Metals And Composites , 1986, Other Conferences.

[10]  M. B. Saintey,et al.  Defect sizing by transient thermography. II. A numerical treatment , 1995 .

[11]  Darryl P Almond,et al.  Edge effects and a method of defect sizing for transient thermography , 1993 .

[12]  Steven M. Shepard.  Advances in thermographic NDT , 2003, SPIE Defense + Commercial Sensing.

[13]  Darryl P Almond,et al.  Transient thermal wave techniques for the evaluation of surface coatings , 1991 .

[14]  Darryl P Almond,et al.  Matched excitation energy comparison of the pulse and lock-in thermography NDE techniques , 2008 .

[15]  D. Almond,et al.  A quantitative analysis of pulsed video thermography , 1991 .