Modeling and Control of the Twisted String Actuation System

The innovative actuation concept presented in this paper allows the implementation of powerful, simple, compact, and light-weight tendon-based driving systems, using as actuators small-size dc motors characterized by high speed and low torque. Due to its properties, this actuation system is very well suited for implementation in highly integrated robotic devices. The basic working principle of this novel actuation system is introduced, and the constitutive equations of the system are given, together with their experimental validation. Driven by the necessity of controlling the actuation force in the robotic hand, the problem of tracking a desired force profile is tackled. With the aim of guaranteeing a high level of robustness against disturbances, a control algorithm based on a second-order sliding manifold has first been evaluated by means of simulations and then validated by experiments. The results obtained with this simple and compact actuation system demonstrate its suitability for use in robotic devices such as robotic hands.

[1]  C. Natale,et al.  The twisted string actuation system: Modeling and control , 2010, 2010 IEEE/ASME International Conference on Advanced Intelligent Mechatronics.

[2]  Joseph J. Beaman,et al.  A dynamic model of a concentric LADD actuator , 1983 .

[3]  Stephen C. Jacobsen,et al.  Design of the Utah/M.I.T. Dextrous Hand , 1986, Proceedings. 1986 IEEE International Conference on Robotics and Automation.

[4]  Design of a Dextrous Hand for advanced CLAWAR applications , 2003 .

[5]  Takashi Sonoda,et al.  A Five Fingered Robotic Hand Prototype by using Twist Drive , 2010, ISR/ROBOTIK.

[6]  G. Palli,et al.  Velocity and disturbance observer for non-model based load and friction compensation , 2008, 2008 10th IEEE International Workshop on Advanced Motion Control.

[7]  Gianluca Palli,et al.  Force sensor based on discrete optoelectronic components and compliant frames , 2011 .

[8]  Makoto Kaneko,et al.  Robot Hands , 2008, Springer Handbook of Robotics.

[9]  G. Mennitto,et al.  LADD Transmissions: Design, Manufacture, and New Compliance Models , 1997 .

[10]  Blake Hannaford,et al.  Measurement and modeling of McKibben pneumatic artificial muscles , 1996, IEEE Trans. Robotics Autom..

[11]  Antonio Bicchi,et al.  Variable Stiffness Actuators for Fast and Safe Motion Control , 2003, ISRR.

[12]  Gianluca Palli,et al.  Integrated Mechatronic Design for a New Generation of Robotic Hands , 2009 .

[13]  Helge J. Ritter,et al.  Platform portable anthropomorphic grasping with the bielefeld 20-DOF shadow and 9-DOF TUM hand , 2007, 2007 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[14]  Alberto Cavallo,et al.  High-order sliding control of mechanical systems: theory and experiments , 2004 .

[15]  Takashi Sonoda,et al.  Multi-fingered robotic hand employing strings transmission named “Twist Drive” , 2010, 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems.

[16]  M. Goldfarb,et al.  Design of a Multifunctional Anthropomorphic Prosthetic Hand With Extrinsic Actuation , 2009, IEEE/ASME Transactions on Mechatronics.

[17]  Haruhisa Kawasaki,et al.  Dexterous anthropomorphic robot hand with distributed tactile sensor: Gifu hand II , 1999, IEEE SMC'99 Conference Proceedings. 1999 IEEE International Conference on Systems, Man, and Cybernetics (Cat. No.99CH37028).

[18]  Alberto Cavallo,et al.  Optoelectronic joint angular sensor for robotic fingers , 2009 .

[19]  Hong Liu,et al.  The Modular Multisensory DLR-HIT-Hand: Hardware and Software Architecture , 2008, IEEE/ASME Transactions on Mechatronics.