Supercritical carbon dioxide assisted phase coarsening of double-percolated polycaprolactone/polystyrene/multi-wall carbon nanotube composites for improved electrical performance and electromagnetic interference shielding

[1]  Kun Zhou,et al.  Controlled Distributed Ti3C2Tx Hollow Microspheres on Thermally Conductive Polyimide Composite Films for Excellent Electromagnetic Interference Shielding , 2023, Advanced materials.

[2]  Chenghao Luo,et al.  Sustainable electromagnetic shielding graphene/nanocellulose thin films with excellent joule heating and mechanical properties via in-situ mechanical exfoliation and crosslinking with cations , 2023, Composites Science and Technology.

[3]  Ming Wang,et al.  A comparative study on nanoparticle network‐dependent electrical conductivity, electromagnetic wave shielding effectiveness and rheological properties in multiwall carbon nanotubes filled polymer nanocomposites , 2022, Polymer Composites.

[4]  Chenghao Luo,et al.  Construction of Unique Conductive Networks in Carbon Nanotubes/Polymer Composites via Poly(ε-caprolactone) Inducing Partial Aggregation of Carbon Nanotubes for Microwave Shielding Enhancement , 2022, Composites Part A: Applied Science and Manufacturing.

[5]  Guangxian Li,et al.  Enhancement of electrical conductivity and electromagnetic interference shielding performance via supercritical CO_2 induced phase coarsening for double percolated polymer blends , 2022, Nano Research.

[6]  Sui-lin Liu,et al.  Frequency-adjustable electromagnetic interference shielding performance of sandwich-structured conductive polymer composites by selective foaming and tunable filler dispersion , 2022, Composites Communications.

[7]  Ming Wang,et al.  Migration mechanism of carbon nanotubes and matching viscosity-dependent morphology in Co-continuous Poly(lactic acid)/Poly(ε-caprolactone) blend: Towards electromagnetic shielding enhancement , 2022, Polymer.

[8]  Sui-lin Liu,et al.  Fabrication of lightweight flexible thermoplastic polyurethane/multiwalled carbon nanotubes composite foams for adjustable frequency-selective electromagnetic interference shielding by supercritical carbon dioxide , 2022, The Journal of Supercritical Fluids.

[9]  P. Show,et al.  Future advances and challenges of nanomaterial-based technologies for electromagnetic interference-based technologies: A review. , 2021, Environmental research.

[10]  Hezhi He,et al.  Morphology evolution to form double percolation polylactide/polycaprolactone/MWCNTs nanocomposites with ultralow percolation threshold and excellent EMI shielding , 2021 .

[11]  Guangxian Li,et al.  Efficient electrical conductivity and electromagnetic interference shielding performance of double percolated polymer composite foams by phase coarsening in supercritical CO2 , 2021 .

[12]  Junwei Gu,et al.  Structural Design Strategies of Polymer Matrix Composites for Electromagnetic Interference Shielding: A Review , 2021, Nano-Micro Letters.

[13]  Jun Lei,et al.  Flexible Poly(vinylidene fluoride)-MXene/Silver Nanowire Electromagnetic Shielding Films with Joule Heating Performance , 2021, Industrial & Engineering Chemistry Research.

[14]  Shaoyun Guo,et al.  Construction, mechanism and prospective of conductive polymer composites with multiple interfaces for electromagnetic interference shielding: A review , 2021, Carbon.

[15]  U. Sundararaj,et al.  Interface Bridging of Multiwalled Carbon Nanotubes in Polylactic Acid/Poly(butylene adipate-co-terephthalate): Morphology, Rheology, and Electrical Conductivity , 2020 .

[16]  Ashutosh Thakur,et al.  Cooperative influences of nanoparticle localization and phase coarsening on thermal conductivity of polypropylene/polyolefin elastomer blends , 2019, Composites Part A: Applied Science and Manufacturing.

[17]  X. Liao,et al.  Organic solvent free preparation of porous scaffolds based on the phase morphology control using supercritical CO2 , 2019, The Journal of Supercritical Fluids.

[18]  C. Bowen,et al.  Electrical dual-percolation in MWCNTs/SBS/PVDF based thermoplastic elastomer (TPE) composites and the effect of mechanical stretching , 2019, European Polymer Journal.

[19]  Na Lu,et al.  Electromagnetic Interference Shielding Polymers and Nanocomposites - A Review , 2019, Polymer Reviews.

[20]  Xihua Cui,et al.  Thermal annealing induced enhancement of electrical properties of a co-continuous polymer blend filled with carbon nanotubes , 2018, Composites Science and Technology.

[21]  Guangxian Li,et al.  The effects of molecular weight and supercritical CO2 on the phase morphology of organic solvent free porous scaffolds , 2018, The Journal of Supercritical Fluids.

[22]  M. R. Aghjeh,et al.  Conductive poly(vinylidene fluoride)/polyethylene/graphene blend‐nanocomposites: Relationship between rheology, morphology, and electrical conductivity , 2018 .

[23]  Wei Liu,et al.  Constructing a double-percolated conductive network in a carbon nanotube/polymer-based flexible semiconducting composite , 2018 .

[24]  Guangxian Li,et al.  A novel route to the generation of porous scaffold based on the phase morphology control of co-continuous poly(ε-caprolactone)/polylactide blend in supercritical CO2 , 2017 .

[25]  U. Sundararaj,et al.  Carbon nanotube induced double percolation in polymer blends: Morphology, rheology and broadband dielectric properties , 2017 .

[26]  Q. Fu,et al.  Achieving a low electrical percolation threshold and superior mechanical performance in poly(L-lactide)/thermoplastic polyurethane/carbon nanotubes composites via tailoring phase morphology with the aid of stereocomplex crystallites , 2017 .

[27]  D. Schubert,et al.  Enhancing the electrical conductivity of carbon black-filled immiscible polymer blends by tuning the morphology , 2016 .

[28]  Q. Zheng,et al.  Effect of multi-walled carbon nanotubes on the morphology evolution, conductivity and rheological behaviors of poly(methyl methacrylate)/poly(styrene-co-acrylonitrile) blends during isothermal annealing , 2016 .

[29]  R. Cardinaels,et al.  Enhancing the conductivity of carbon nanotube filled blends by tuning their phase separated morphology with a copolymer , 2015 .

[30]  Dujing Wang,et al.  Characterization on the phase separation behavior of styrene-butadiene rubber/polyisoprene/organoclay ternary blends under oscillatory shear. , 2015, The Journal of chemical physics.

[31]  S. Howdle,et al.  High-pressure rheological analysis of CO2-induced melting point depression and viscosity reduction of poly(ε-caprolactone) , 2015 .

[32]  P. Cassagnau,et al.  Structuration, selective dispersion and compatibilizing effect of (nano)fillers in polymer blends , 2014 .

[33]  Jinrui Huang,et al.  Control of carbon nanotubes at the interface of a co-continuous immiscible polymer blend to fabricate conductive composites with ultralow percolation thresholds , 2014 .

[34]  R. Sonnier,et al.  Incorporation of modified Stöber silica nanoparticles in polystyrene/polyamide-6 blends: Coalescence inhibition and modification of the thermal degradation via controlled dispersion at the interface , 2014 .

[35]  I. Huynen,et al.  Polymer/carbon based composites as electromagnetic interference (EMI) shielding materials , 2013 .

[36]  Yutian Zhu,et al.  Design of electrical conductive composites: tuning the morphology to improve the electrical properties of graphene filled immiscible polymer blends. , 2012, ACS applied materials & interfaces.

[37]  H. Deng,et al.  Preparation of high performance conductive polymer fibres from double percolated structure , 2011 .

[38]  Xiangmin Han,et al.  A Review of CO2 Applications in the Processing of Polymers , 2003 .

[39]  D. R. Lloyd,et al.  The effects of viscosity on coalescence-induced coalescence , 2003 .

[40]  D. R. Paul,et al.  Formation of Co-continuous Structures in Melt-Mixed Immiscible Polymer Blends , 2003 .

[41]  C. J. Carriere,et al.  Interfacial tension of poly(lactic acid)/polystyrene blends , 2002 .

[42]  C. J. Carriere,et al.  Interfacial tension of polycaprolactone/polystyrene blends by the imbedded fiber retraction method† , 2002 .

[43]  J. Dam,et al.  On the coarsening of co-continuous morphologies in polymer blends: effect of interfacial tension, viscosity and physical cross-links , 2000 .

[44]  C. J. Carriere,et al.  Molecular Weight Dependence of Polystyrene/Poly(methyl methacrylate) Interfacial Tension Probed by Imbedded-Fiber Retraction , 1994 .

[45]  Leon P.B.M. Janssen,et al.  Supercritical carbon dioxide as a green solvent for processing polymer melts: Processing aspects and applications , 2006 .

[46]  C. Tzoganakis,et al.  Measurement of interfacial tension in PS/LDPE melts saturated with supercritical CO2 , 2004 .