Reactive power compensation in inverter-interfaced distributed generation

The consumption of reactive power is stochastic in nature for the distribution system. This uncertain variation of the reactive power leads to 1) Variation of voltage at the point of common coupling(PCC) 2)Low power factor 3)low efficiency 4) improper utilization of distribution system and 5) loss of synchronism for a grid connected inverter based — distributed generation. Now a day's distributed generation (DG) system uses current regulated PWM voltage-source inverters (VSI) for synchronizing the utility grid with DG source in order to ensure the grid stability. In this paper reactive power compensation based hysteresis controller and adaptive hysteresis controller is analyzed for inverter interfaced DG which can control the active and reactive power independently. The adaptive hysteresis controller can reduce the current harmonic at PCC considerably which ensures lower total harmonic distortion (THD). The performance indices include THD of the grid current, fast current tracking during steady state and transient conditions. The studied system is modeled and simulated in the MATLAB Simulink environment.

[1]  L. Malesani,et al.  PWM current control techniques of voltage source converters-a survey , 1993, Proceedings of IECON '93 - 19th Annual Conference of IEEE Industrial Electronics.

[2]  F. Blaabjerg,et al.  Power electronics as efficient interface in dispersed power generation systems , 2004, IEEE Transactions on Power Electronics.

[3]  Wei-Jen Lee,et al.  System impact study for the interconnection of wind generation and utility system , 2005, IEEE Transactions on Industry Applications.

[4]  Frede Blaabjerg,et al.  Overview of Control and Grid Synchronization for Distributed Power Generation Systems , 2006, IEEE Transactions on Industrial Electronics.

[5]  Colin D. Simpson,et al.  Industrial Electronics , 1936, Nature.

[6]  Pooya Ghani An adaptive hysteresis band current controller for inverter base DG with reactive power compensation , 2010, 2010 1st Power Electronic & Drive Systems & Technologies Conference (PEDSTC).

[7]  Bhim Singh,et al.  Reactive power compensation and load balancing in electric power distribution systems , 1998 .

[8]  Xavier Olive,et al.  Industrial applications , 2007 .

[9]  T. S. Radwan,et al.  Analysis of current controllers for voltage-source inverter , 1997, IEEE Trans. Ind. Electron..

[10]  Donald W. Novotny,et al.  Current Control of VSI-PWM Inverters , 1985, IEEE Transactions on Industry Applications.

[11]  Bimal K. Bose,et al.  An Adaptive Hysteresis-Band Current Control Technique of a Voltage-Fed Pwm Inverter for Machine Drive System , 1988, Proceedings.14 Annual Conference of Industrial Electronics Society.

[12]  S. H. Fathi,et al.  Multifunction current controller for inverter-based distributed generation using combined pi-sliding mode controller via Sigma-Delta Modulation , 2009, 2009 IEEE International Symposium on Industrial Electronics.

[13]  H.S.-H. Chung,et al.  Constant-frequency hysteresis current control of grid-connected VSI without bandwidth control , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[14]  Marian P. Kazmierkowski,et al.  Current control techniques for three-phase voltage-source PWM converters: a survey , 1998, IEEE Trans. Ind. Electron..