B4C-SiC skeleton reinforced graphite composites with excellent mechanical properties

[1]  Liang Wang,et al.  Progress in ceramic materials and structure design toward advanced thermal barrier coatings , 2022, Journal of Advanced Ceramics.

[2]  Zhongqi Shi,et al.  Continuous SiC skeleton reinforced highly oriented graphite flake composites with high strength and specific thermal conductivity , 2022, Journal of Advanced Ceramics.

[3]  Zdenek Sofer,et al.  Synthesis and Applications of Graphene Oxide , 2022, Materials.

[4]  Q. Song,et al.  Nano-interface effect of graphene on carbon nanotube reinforced carbon/carbon composites , 2022, Carbon.

[5]  Zhongqi Shi,et al.  Effect of carbon nanotube hybrid on the microstructure and properties of AlN skeleton-reinforced highly oriented graphite flake composites , 2021, Ceramics International.

[6]  Yajuan Zhong,et al.  Mesocarbon microbead densified matrix graphite A3-3 for fuel elements in molten salt reactors , 2020 .

[7]  H. Xia,et al.  Enhanced thermal conductivity of epoxy composites by constructing aluminum nitride honeycomb reinforcements , 2020 .

[8]  H. Xia,et al.  Synthesis of nearly spherical AlN particles by an in-situ nitriding combustion route , 2020, Journal of Advanced Ceramics.

[9]  Zhongya Zhang,et al.  High toughness and R-curve behaviour of laminated SiC/graphite ceramics , 2020 .

[10]  Hyungsun Kim,et al.  Mechanical properties of B4C–SiC composites fabricated by hot-press sintering , 2020 .

[11]  H. Xia,et al.  Enhancing the mechanical and thermophysical properties of highly oriented graphite flake composites by formation of a uniform three dimensional tungsten carbide skeleton reinforcement , 2020 .

[12]  Xin-bo He,et al.  Effect of alloying element Zr on the microstructure and properties of graphite flake/Cu composites fabricated by vacuum hot pressing , 2019, Journal of Alloys and Compounds.

[13]  H. Xia,et al.  Three dimensional AlN skeleton-reinforced highly oriented graphite flake composites with excellent mechanical and thermophysical properties , 2018 .

[14]  L. A. Genova,et al.  Effect of temperature and heating rate on the sintering performance of SiC-Al2O3-Dy2O3 and SiC-Al2O3-Yb2O3 systems , 2017 .

[15]  Chenglong Hu,et al.  Design, Preparation and Properties of Carbon Fiber Reinforced Ultra-High Temperature Ceramic Composites for Aerospace Applications: A Review , 2017 .

[16]  D. Stratiichuk,et al.  Thermodynamic calculation of the phase diagram of the Si–C system up to 8 GPa , 2016, Journal of Superhard Materials.

[17]  A. Domínguez-Rodríguez,et al.  High-temperature plastic deformation of spark plasma sintered boron carbide-based composites: The case study of B4C–SiC with/without graphite (g) , 2016 .

[18]  Limeng Liu,et al.  Phase Relations in the Si-Al-Nd-O-C System , 2016, Journal of Phase Equilibria and Diffusion.

[19]  V. Srivastava,et al.  Tribological behaviour of C/C–SiC composites—A review , 2016, Journal of Advanced Ceramics.

[20]  P. Menezes,et al.  Mechanical and tribological properties of self-lubricating metal matrix nanocomposites reinforced by carbon nanotubes (CNTs) and graphene – A review , 2015 .

[21]  Zhan-jun Liu,et al.  The structure of MB2MCC (MZr, Hf, Ta) multi-phase ceramic coatings on graphite , 2014 .

[22]  Y. Miyamoto,et al.  Effect of graphite powders on formation of AlN ceramic-bonded carbon composites , 2014 .

[23]  Y. Miyamoto,et al.  Fabrication of SiC Ceramic Bonded Carbon and Its Joining with W , 2012 .

[24]  Jun Du,et al.  Influence of tungsten particles on the electrical properties of AlN ceramic , 2012, Journal of Materials Science: Materials in Electronics.

[25]  Y. Miyamoto,et al.  SiC Ceramic-Bonded Carbon Fabricated With Si3N4 and Carbon Powders , 2012 .

[26]  Y. Miyamoto,et al.  Synthesis of Ceramic Bonded Carbon Using SiC‐Coated Carbon Particles and Spark Plasma Sintering , 2011 .

[27]  A. Nishida,et al.  Impact of carbon coimplantation on boron behavior in silicon: Carbon–boron coclustering and suppression of boron diffusion , 2011 .

[28]  Y. Miyamoto,et al.  Development of New Composites; Ceramic Bonded Carbon , 2009 .

[29]  S. Tongay,et al.  Graphite based Schottky diodes formed on Si, GaAs, and 4H-SiC substrates , 2009, 0910.0615.

[30]  Manfred Lenzen,et al.  Life cycle energy and greenhouse gas emissions of nuclear energy: A review , 2008 .

[31]  Zhan-jun Liu,et al.  Graphite blocks with high thermal conductivity derived from natural graphite flake , 2008 .

[32]  K. M. Mahmoud,et al.  Fracture strength for a high strength steel bridge cable wire with a surface crack , 2007 .

[33]  Y. Abe,et al.  Evaluation of Oxidation Behavior of the C-B4C-SiC Composite through Continuous Measurement of Mass Change and Gas Concentration , 2006 .

[34]  A. Luedtke.  Thermal Management Materials for High‐Performance Applications , 2004 .

[35]  P. Vomacka,et al.  Comparison of mechanical properties in flake graphite and compacted graphite cast irons for piston rings , 2004 .

[36]  G. Ferro,et al.  Comparison between Ar and N2 for High-Temperature Treatment of 4H-SiC Substrates , 2003 .

[37]  Heon-Jin Choi,et al.  Oxidation Behavior of Liquid‐Phase Sintered Silicon Carbide with Aluminum Nitride and Rare‐Earth Oxides (Re2O3, where Re = Y, Er, Yb) , 2002 .

[38]  P. Karduck,et al.  Investigations in the boron-carbon system with the aid of electron probe microanalysis , 1991 .

[39]  F. L. Vogel,et al.  The electrical conductivity of graphite intercalated with superacid fluorides: experiments with antimony pentafluoride , 1977 .

[40]  A. Evans,et al.  The fracture stress and its dependence on slow crack growth , 1975 .

[41]  Yu,et al.  Non-stoichiometric boron carbide synthesized in moderate temperature conditions , 2010 .

[42]  T. Nishimura,et al.  High-temperature strength of silicon carbide ceramics sintered with rare-earth oxide and aluminum nitride , 2007 .

[43]  이준근,et al.  Oxidation behavior of liquid-phase sintered silicon carbide with aluminum nitride and rare-earth oxides (Re2O3, where Re = Y, Er, Yb) , 2002 .

[44]  M. Toriyama,et al.  Influence of Silica and Aluminum Contents on Sintering of and Grain Growth in 6H‐SiC Powders , 2000 .

[45]  Marek Balazinski,et al.  Machinability of Graphitic Metal Matrix Composites as a Function of Reinforcing Particles , 1999 .

[46]  F. Lincoln Vogel.  The electrical conductivity of graphite intercalated with superacid fluorides: experiments with antimony pentafluoride , 1977 .