The influence of maleic anhydride-grafted polymers as compatibilizer on the properties of polypropylene and cyclic natural rubber blends

[1]  F. R. Passador,et al.  Effect of LLDPE-g-MA on the rheological, thermal, mechanical properties and morphological characteristic of PA6/LLDPE blends , 2019, Journal of Polymer Research.

[2]  Mafalda S. Lima,et al.  Glycidyl methacrylate-based copolymers as new compatibilizers for polypropylene/ polyethylene terephthalate blends , 2019, Journal of Polymer Research.

[3]  C. Dupont-Gillain,et al.  Predicting the adhesion strength of thermoplastic/glass interfaces from wetting measurements , 2018, Colloids and Surfaces A: Physicochemical and Engineering Aspects.

[4]  R. Riahifar,et al.  Comparison of wetting models and geometrical analysis in describing the effect of cavity number, size, and position on apparent contact angle , 2017 .

[5]  S. A. Samsudin,et al.  Interface modification of compatibilized polyethylene terephthalate/polypropylene blends: Effect of compatibilization on thermomechanical properties and thermal stability , 2017 .

[6]  Ana G. Petrovic,et al.  Absolute configurations of phytotoxic inuloxins B and C based on experimental and computational analysis of chiroptical properties. , 2016, Phytochemistry.

[7]  M. Doğan,et al.  The use of polyethylene copolymers as compatibilizers in carbon fiber reinforced high density polyethylene composites , 2016 .

[8]  F. Ronkay,et al.  Investigation of compatibilization effects of SEBS-g-MA on polystyrene/polyethylene blend with a novel separation method in melted state , 2016, Polymer Bulletin.

[9]  M. S. Siregar.  Modifikasi Dan Karakterisasi Karet Alam Siklis (Resiprena 35) Dengan Anhidrida Maleat Sebagai Substituen Bahan Pengikat Cat Sintetis , 2015 .

[10]  Jia Shi-kui,et al.  Influences of PP-g-MA on the surface free energy, morphologies and mechanical properties of thermoplastic polyurethane / polypropylene blends , 2015 .

[11]  Y. Son,et al.  Investigation of the nanostructure, thermal stability, and mechanical properties of polylactic acid/cellulose acetate butyrate/clay nanocomposites , 2015 .

[12]  L. Fu,et al.  Influences of PP-g-MA on the surface free energy, morphologies and mechanical properties of thermoplastic polyurethane / polypropylene blends , 2015, Journal of Polymer Research.

[13]  A. D. Azzahari,et al.  Improvement in the mechanical performance and interfacial behavior of kenaf fiber reinforced high density polyethylene composites by the addition of maleic anhydride grafted high density polyethylene , 2014, Journal of Polymer Research.

[14]  A. Naderi,et al.  Rheologically determined phase behavior and miscibility of reactively compatibilized poly(ethylene terephthalate)/polypropylene blends , 2014, Polymer Bulletin.

[15]  T. Engelhardt,et al.  Evidence of chemical compatibilization reaction between poly(ether ether ketone) and irradiation-modified poly(tetrafluoroethylene) , 2014 .

[16]  Luke M. Geever,et al.  Morphology, rheology and mechanical properties of polypropylene/ethylene–octene copolymer/clay nanocomposites: Effects of the compatibilizer , 2012 .

[17]  A. Singh,et al.  Compatibilization Efficacy of LLDPE-g-MA on Mechanical, Thermal, Morphological and Water Absorption Properties of Nylon-6/LLDPE Blends , 2012 .

[18]  E. Yıldırım,et al.  A comparative study on the efficiencies of polyethylene compatibilizers by using theoretical methods , 2012, Journal of Polymer Research.

[19]  F. Vilaseca,et al.  Influence of coupling agents in the preparation of polypropylene composites reinforced with recycled fibers , 2011 .

[20]  M. Šlouf,et al.  Morphology and Properties of SEBS Block Copolymer Compatibilized PS/HDPE Blends , 2008 .

[21]  Yueli Zhang,et al.  Polypropylene surface modification by entrapment of polypropylene-graft-poly(butyl methacrylate) , 2008 .

[22]  S. Velankar,et al.  Effects of compatibilizer on immiscible polymer blends near phase inversion , 2007 .

[23]  D. García-López,et al.  Effect of the Amount and Funtionalization Grade of PPgMA Compatibilization Agent in Polypropylene/clay nanocomposites , 2007 .

[24]  J. Sakdapipanich,et al.  Preparation of Cyclized Deproteinized Natural Rubber in Latex State via a Combination of Benzotrichloride and Sulfuric Acid System, and Its Properties , 2007 .

[25]  M. Bousmina,et al.  Morphology and properties of organoclay modified polycarbonate/poly(methyl methacrylate) blend , 2006 .

[26]  S. Pezzin,et al.  Mechanical properties of polypropylene reinforced with recycled-pet fibres , 2003 .

[27]  Valérie Massardier-Nageotte,et al.  Compatibilization of PE/PS and PE/PP blends. I. Effect of processing conditions and formulation , 2003 .

[28]  L. Utracki.  Compatibilization of Polymer Blends , 2002 .

[29]  D. F. Caulfield,et al.  Effect of compatibilizer on the structure-property relationships of kenaf-fiber/polypropylene composites , 2001 .

[30]  M. Mirzataheri.  The Cyclization of Natural Rubber , 2000 .

[31]  T. Chung,et al.  Synthesis of maleic anhydride grafted polyethylene and polypropylene, with controlled molecular structures , 2000 .

[32]  C. Papadopoulou,et al.  Comparison of compatibilizer effectiveness for PET/PP blends: their mechanical, thermal and morphology characterization , 2000 .

[33]  K. Kelar,et al.  Influence of chemical and mechanical compatibilization on structure and properties of polyethylene/polyamide blends , 1998 .

[34]  G. P. Hellmann,et al.  Peroxy-initiated chain degradation, crosslinking, and grafting in PP-PE blends , 1998 .

[35]  S. Tjong,et al.  Impact and tensile properties of SEBS copolymer compatibilized PS/HDPE blends , 1998 .

[36]  E. Hinrichsen,et al.  Effects of processing parameters and molecular weight distribution on the tensile properties of polypropylene fibers , 1994 .

[37]  Shiping Zhu,et al.  Free radical degradation of polypropylene : random chain scission , 1993 .

[38]  J. Koenig,et al.  A fourier transform infrared and nuclear magnetic resonance study of cyclized natural rubber , 1987 .

[39]  J. W. Barlow,et al.  Mechanical compatibilization of immiscible blends , 1984 .

[40]  E. Turi,et al.  The deterioration of polypropylene by oxidative degradation , 1965 .