A Probabilistic Model for Internal Corrosion of Gas Pipelines

Locating internal corrosion damage in gas pipelines is made difficult by the presence of large uncertainties in flow characteristics, pre-existing conditions, corrosion resistance, elevation data, and test measurements. This paper describes a preliminary methodology to predict the most probable corrosion damage location along the pipelines, and then update this prediction using inspection data. The approach computes the probability of critical corrosion damage as a function of location along the pipeline using physical models, for flow, corrosion rate, and inspection information as well as uncertainties in elevation data, pipeline geometry and flow characteristics. The probabilistic methodology is based on the internal corrosion direct assessment (ICDA) methodology. The probability of corrosion damage is the probability that the corrosion depth exceeds a critical depth times the probability of the presence of electrolytes such as water. Water is assumed present at locations where the pipeline inclination angle is greater than the critical angle. The corrosion rate is defined to be a linear combination of three candidate corrosion rate models with separate weight factors. Monte Carlo simulation and the first-order reliability method (FORM) implemented in a simple spreadsheet model are used to perform the probability integration. Bayesian updating is used to incorporate inspection information (e.g., in-line, excavation, etc.) and update the corrosion rate model weight factors and thereby refine the prediction of most probable damage location. This provides a systematic method for focusing costly inspections on only those locations with a high probability of damage while allowing future predictions to better reflect field observations.Copyright © 2004 by ASME

[1]  K. Simola,et al.  Models for non-destructive inspection data , 1998 .

[2]  M. Ahammed,et al.  Probabilistic estimation of remaining life of a pipeline in the presence of active corrosion defects , 1998 .

[3]  D. G. Harlow,et al.  Corrosion Enhanced Fatigue and MSD , 2002 .

[4]  J. Rajasankar,et al.  Structural integrity assessment of offshore tubular joints based on reliability analysis , 2003 .

[5]  Ming Gao,et al.  Approach to Assessment of Corrosion Growth in Pipelines , 2002 .

[6]  Han Ping Hong,et al.  Inspection and maintenance planning of pipeline under external corrosion considering generation of new defects , 1999 .

[7]  W. P. Jepson,et al.  Study on corrosion inhibitor in large pipelines under multiphase flow using EIS , 2002 .

[8]  Ajit Srividya,et al.  A comprehensive framework for evaluation of piping reliability due to erosion-corrosion for risk-informed inservice inspection , 2003, Reliab. Eng. Syst. Saf..

[9]  Norman Sartorius,et al.  Calgary, Alberta, Canada , 2005 .

[10]  W. Kent Muhlbauer,et al.  Pipeline Risk Management Manual , 1992 .

[11]  G. Tang,et al.  Modeling slope uncertainty derived from DEM : a case study in China loess plateau area , 2002 .

[12]  U. O. Akpan,et al.  Probabilistic Modeling of Corroded Pipeline Structures , 2002 .

[13]  Francisco Caleyo,et al.  A study on the reliability assessment methodology for pipelines with active corrosion defects , 2002 .

[14]  Robert E. Melchers,et al.  Probabilistic analysis of pipelines subjected to pitting corrosion leaks , 1995 .

[15]  Qihao Weng Quantifying Uncertainty of Digital Elevation Models Derived from Topographic Maps , 2002 .

[16]  P. Kyriakidis,et al.  Error in a USGS 30-meter digital elevation model and its impact on terrain modeling , 2000 .

[17]  Hector Morelos-Borja,et al.  Recent advances on terrain database correlation testing , 1998, Defense, Security, and Sensing.

[18]  Ian J. Rippon,et al.  Improvements on de Waard-Milliams Corrosion Prediction and Applications to Corrosion Management , 2002 .

[19]  Sankaran Mahadevan,et al.  Model uncertainty and Bayesian updating in reliability-based inspection , 2000 .

[20]  Nguyen N. Bich An Approach to Corrosion Mitigation for Wet Gas Pipelines , 2002 .

[21]  H Dijstelbergen,et al.  International gas research conferenceTokyo, Japan, November 1989 , 1990 .

[22]  C. E. Jaske,et al.  Development and Evaluation of Improved Model for Engineering Critical Assessment of Pipelines , 2002 .

[23]  Nguyen N. Bich,et al.  Assessment and Control of Top Side/Riser/Pipeline Corrosion of a Subsea Gas Re-Injection System , 2003 .

[24]  Mahesh D. Pandey,et al.  Probabilistic models for condition assessment of oil and gas pipelines , 1998 .

[25]  R. Pick,et al.  Prediction of the failure pressure for complex corrosion defects , 2002 .

[26]  Roy Johnsen,et al.  APPLICATION OF INTERNAL CORROSION MODELING IN THE RISK ASSESSMENT OF PIPELINES , 2003 .

[27]  E. Buck,et al.  Corrosion inhibitor transport in a wet-gas pipeline , 1993 .

[28]  Y. M. Gunaltun Combining Research And Field Data For beorrosion Rate Prediction , 1996 .