Abstract—The usefulness of microtremors as a geophysical exploration tool has been analyzed. This application is possible due to the relationship between the main resonance frequency of a given soil, obtained from the H/V spectral ratios of microtremors, its thickness and average shear velocity. We first measured the ambient noise at 33 sites and determined their main resonance frequency. Detailed geotechnical information was available for 23 of the sites, thereby allowing us to establish a quantitative relationship between the resonance frequency and the thickness of the soil, and indirectly between either of them and the shear velocity of the soil. The practical application of this relationship has revealed its usefulness in determining the surface structure of a valley with excellent accuracy, with an error of only 15% in the depths calculated. These errors are due to the simplification of the problem that this method implies: it requires that the shear velocity vary constantly with depth throughout the study region, which is evidently not always so, and that the input data themselves intrinsically have a certain degree of uncertainty. This method is therefore not valid when there is no mechanical contrast between the study soil and the underlying layer or when the shear velocity varies irregularly with depth in the study area.
[1]
Masayuki Takemura,et al.
Characteristics of long-period microtremors and their applicability in exploration of deep sedimentary layers
,
1994,
Bulletin of the Seismological Society of America.
[2]
M. I. Seht,et al.
Microtremor measurements used to map thickness of soft sediments
,
1999
.
[3]
Susan E. Hough,et al.
Earthquake site-response study in Giumri (formerly Leninakan), Armenia, using ambient noise observations
,
1995
.
[4]
I. M. Idriss,et al.
Moduli and Damping Factors for Dynamic Analyses of Cohesionless Soils
,
1986
.