Integration of Sequential Process Adjustment and Process Monitoring Techniques

Detecting abnormal disturbances and correcting them through adjustment are essential functions of quality control. This paper discusses a general sequential adjustment procedure based on stochastic approximation techniques and combines it with a control chart for detection. It is assumed that step-like shifts of unknown size occur in the process mean at unknown points of time. The performance of the proposed methods depends on the sensitivity of the control chart to detect shifts in the process mean, on the accuracy of the initial estimate of the shift size, and on the number of sequential adjustments that are made. It is shown that sequential adjustments are superior to single adjustment strategies for almost all types of process shifts and magnitudes considered. A CUSUM (cumulative sum) chart used in conjunction with our sequential adjustment approach can improve the average squared deviations, the performance index considered herein, more than any other combined scheme unless the shift size is very large. The proposed integrated approach is compared with always applying a standard integral or exponentially weighted moving average controller with no monitoring component. Combining control charts and sequential adjustments is recommended for monitoring and adjusting a process when random shocks occur infrequently in time. Copyright © 2003 John Wiley & Sons, Ltd.

[1]  B. M. Adams,et al.  An analysis of Taguchi's on-line process-control procedure under a random-walk model , 1989 .

[2]  Alberto Luceño.  Performance of EWMA versus last observation for feedback control , 1992 .

[3]  Dan Trietsch,et al.  The Harmonic Rule for Process Setup Adjustment With Quadratic Loss , 1998 .

[4]  Ruey-Shan Guo,et al.  An Enhanced EWMA Controller for Processes Subject to Random Disturbances , 2000 .

[5]  James D. Hamilton.  Time Series Analysis , 1994 .

[6]  Muni S. Srivastava,et al.  On-line control procedures for integrated moving average process of order one , 1999 .

[7]  B. K. Ghosh,et al.  Handbook of sequential analysis , 1991 .

[8]  George E. P. Box,et al.  Statistical process monitoring and feedback adjustment: a discussion , 1992 .

[9]  G. Taguchi.  Quality engineering in japan , 1985 .

[10]  G. Lorden.  PROCEDURES FOR REACTING TO A CHANGE IN DISTRIBUTION , 1971 .

[11]  Arnon M. Hurwitz,et al.  Run-to-Run Process Control: Literature Review and Extensions , 1997 .

[12]  Bianca M. Colosimo,et al.  Small Sample Performance of Some Statistical Setup Adjustment Methods , 2003 .

[13]  Tim Kramer,et al.  Process Control From An Economic Point of View-Chapter 1: Industrial Process Control , 1990 .

[14]  M. T. Wasan.  Stochastic Approximation , 1969 .

[15]  Douglas C. Montgomery,et al.  Integrating Statistical Process Control and Engineering Process Control , 1994 .

[16]  Gwilym M. Jenkins,et al.  Time series analysis, forecasting and control , 1972 .

[17]  Monica Dumitrescu,et al.  Control Charts and Feedback Adjustments for a Jump Disturbance Model , 2000 .

[18]  D. Ruppert.  A NEW DYNAMIC STOCHASTIC APPROXIMATION PROCEDURE , 1979 .

[19]  John F. MacGregor,et al.  A different view of the funnel experiment , 1990 .

[20]  G. Barnard.  Control Charts and Stochastic Processes , 1959 .

[21]  John R. English,et al.  Detecting changes in autoregressive processes with X¯ and EWMA charts , 2000 .

[22]  W. T. Tucker,et al.  Algorithmic Statistical Process Control: An Elaboration , 1993 .

[23]  George E. P. Box,et al.  Statistical Control: By Monitoring and Feedback Adjustment , 1997 .

[24]  Frank E. Grubbs,et al.  An Optimum Procedure for Setting Machines or Adjusting Processes , 1983 .

[25]  Enrique Del Castillo,et al.  Some Properties of EWMA Feedback Quality Adjustment Schemes for Drifting Disturbances , 2001 .

[26]  W. David Kelton,et al.  Adjustment rules based on quality control charts , 1990 .

[27]  D. Siegmund.  Sequential Analysis: Tests and Confidence Intervals , 1985 .

[28]  Armann Ingolfsson,et al.  Run by run process control: combining SPC and feedback control , 1995 .

[29]  Argon Chen,et al.  An alternative mean estimator for processes monitored by SPC charts , 2000 .

[30]  Bianca M. Colosimo,et al.  A Unifying View of Some Process Adjustment Methods , 2003 .

[31]  Emmanuel Yashchin,et al.  Estimating the current mean of a process subject to abrupt changes , 1995 .

[32]  Douglas C. Montgomery,et al.  Integrating statistical process monitoring with feedforward control , 2000 .

[33]  G. Lorden.  On Excess Over the Boundary , 1970 .

[34]  William H. Woodall,et al.  THE STATISTICAL DESIGN OF CUSUM CHARTS , 1993 .

[35]  Vijayan N. Nair,et al.  On the efficiency and robustness of discrete proportional-integral control schemes , 1998 .

[36]  Stephen V. Crowder,et al.  Small Sample Properties of an Adaptive Filter Applied to Low Volume SPC , 2001 .

[37]  Roger M. Sauter,et al.  Introduction to Statistical Quality Control (2nd ed.) , 1992 .