Influence of the Replacement of the Actual Plastic Orthotropy with Various Approximations of Normal Anisotropy on Residual Stresses and Strains in a Thin Disk Subjected to External Pressure

Plastic anisotropy is very common to metallic materials. This property may significantly affect the performance of structures. However, the actual orthotropic yield criterion is often replaced with a criterion based on the assumption of normal anisotropy. The present paper aims to reveal the influence of this replacement on the distribution of strains and residual strains in a thin hollow disk under plane stress conditions. The boundary-value problem is intentionally formulated such that it is possible to obtain an exact semi-analytical solution without relaxing the boundary conditions. It is assumed that the disk is loaded by external pressure, followed by elastic unloading. The comparative analysis of the distributions of residual strains shows a significant deviation of the distribution resulting from the solutions based on the assumption of normal anisotropy from the distribution found using the actual orthotropic yield criterion. This finding shows that replacing the actual orthotropic yield criterion with the assumption of normal anisotropy may result in very inaccurate predictions. The type of anisotropy accepted is of practical importance because it usually results from such processes as drawing end extrusion with an axis of symmetry.

[1]  J. Pan,et al.  FAILURE PREDICTION IN ANISOTROPIC SHEET METALS UNDER FORMING OPERATIONS WITH CONSIDERATION OF ROTATING PRINCIPAL STRETCH DIRECTIONS , 2000 .

[2]  Daw-Kwei Leu,et al.  Relationship between mechanical properties and geometric parameters to limitation condition of springback based on springback–radius concept in V-die bending process , 2018, The International Journal of Advanced Manufacturing Technology.

[3]  S. Paul Non-linear Correlation Between Uniaxial Tensile Properties and Shear-Edge Hole Expansion Ratio , 2014, Journal of Materials Engineering and Performance.

[4]  W. Chien,et al.  Modified Anisotropic Gurson Yield Criterion for Porous Ductile Sheet Metals , 2001 .

[5]  Owen Richmond,et al.  A Hybrid Membrane/Shell Method for Rapid Estimation of Springback in Anisotropic Sheet Metals , 1998 .

[6]  Taylan Altan,et al.  Mathematical modeling of plane-strain bending of sheet and plate , 1993 .

[7]  L. Zhuang,et al.  Relationship among mechanical properties anisotropy, microstructure and texture in AA 6111 alloy sheets , 2016, Journal of Wuhan University of Technology-Mater. Sci. Ed..

[8]  M. Prime Amplified effect of mild plastic anisotropy on residual stress and strain anisotropy , 2017 .

[9]  Sergei Alexandrov,et al.  Effect of Plastic Anisotropy on the Distribution of Residual Stresses and Strains in Rotating Annular Disks , 2018, Symmetry.

[10]  Ping Hu,et al.  The numerical and analytical study on stretch flanging of V-shaped sheet metal , 2007 .

[11]  V. Yıldırım Numerical/analytical solutions to the elastic response of arbitrarily functionally graded polar orthotropic rotating discs , 2018, Journal of the Brazilian Society of Mechanical Sciences and Engineering.

[12]  T. Takasugi,et al.  Texture Control for Improving Deep Drawability in Rolled and Annealed Aluminum Alloy Sheets , 2007 .

[13]  J. H. Kim,et al.  Prediction of hole expansion ratio for various steel sheets based on uniaxial tensile properties , 2018, Metals and Materials International.

[14]  R. H. Wagoner,et al.  Simulation of springback: Through-thickness integration , 2007 .

[15]  H. Argeso,et al.  Elastic analysis of variable profile and polar orthotropic FGM rotating disks for a variation function with three parameters , 2017 .

[16]  Z. Marciniak,et al.  Limit strains in the processes of stretch-forming sheet metal , 1967 .

[17]  John A. Williams,et al.  The use of a shear instability criterion to predict local necking in sheet metal deformation , 1983 .

[18]  D. Durban,et al.  Analysis of circular hole expansion with generalized yield criteria , 2009 .

[19]  Chong Peng,et al.  Influence of Continuous Annealing Temperature on Mechanical Properties and Texture of Battery Shell Steel , 2019, Metals.

[20]  J. Jonas,et al.  Modeling of the plastic anisotropy of textured sheet , 1988, Metallurgical and Materials Transactions A.

[21]  N. A. Castro,et al.  Microstructure, Crystallographic Texture, and Stretch‐Flangeability of Hot‐Rolled Multiphase Steel , 2020, steel research international.

[22]  V. Serebryany,et al.  Evaluation of the normal anisotropy coefficient in AZ31 alloy sheets , 2009 .

[23]  Wing Bun Lee,et al.  An exact solution for the elastic/plastic bending of anisotropic sheet metal under conditions of plane strain , 2001 .

[24]  M. Davidson,et al.  Effect of Lubrication and Anisotropy on Hardness in the Upsetting Test , 2016, Transactions of the Indian Institute of Metals.

[25]  R. Uścinowicz Characterization of Directional Elastoplastic Properties of Al/Cu Bimetallic Sheet , 2019, Journal of Materials Engineering and Performance.

[26]  Jwo Pan,et al.  Approximate yield criteria for anisotropic porous ductile sheet metals , 1997 .

[27]  Abel D. Santos,et al.  Benchmark 1 - Failure Prediction after Cup Drawing, Reverse Redrawing and Expansion Part A: Benchmark Description , 2016 .

[28]  S. Bruschi,et al.  Formability prediction of Ti6Al4V titanium alloy sheet deformed at room temperature and 600 °C , 2020 .