Review on phase change materials (PCMs) for cold thermal energy storage applications

[1]  S. Roy,et al.  Laminar forced convection heat transfer with phase change material suspensions , 1997 .

[2]  Antonio Rovira,et al.  A model to predict the behaviour at part load operation of once-through heat recovery steam generators working with water at supercritical pressure , 2010 .

[3]  Jean-Pierre Bédécarrats,et al.  Study of a phase change energy storage using spherical capsules. Part I: Experimental results , 2009 .

[4]  Ching-Jenq Ho,et al.  The melting process of ice from a vertical wall with time-periodic temperature perturbation inside a rectangular enclosure , 1993 .

[5]  S. M. Hasnain.  Review on sustainable thermal energy storage technologies, Part II: cool thermal storage , 1998 .

[6]  D. Leducq,et al.  Performance enhancement of a household refrigerator by addition of latent heat storage , 2008 .

[7]  L. Cabeza,et al.  Salt Water Solutions as PCM for Cooling Applications , 2010 .

[8]  Nicolas Calvet.  Stockages thermiques performants et durables pour procédés solaires : des basses aux hautes températures , 2010 .

[9]  Ibrahim Dincer,et al.  Thermal modeling of a packed bed thermal energy storage system during charging , 2009 .

[10]  HEAT TRANSFER AUGMENTATION FOR EXTERNAL ICE-ON-TUBE TES SYSTEMS USING POROUS COPPER MESH TO INCREASE VOLUMETRIC ICE PRODUCTION , 2006 .

[11]  He Bo,et al.  Tetradecane and hexadecane binary mixtures as phase change materials (PCMs) for cool storage in district cooling systems , 1999 .

[12]  A. Sharma,et al.  Review on thermal energy storage with phase change materials and applications , 2009 .

[13]  N. Van Dang,et al.  Maximum in the stability of the amorphous state in the system water--glycerol--ethanol. , 1979, Cryobiology.

[14]  Masahiko Yamada,et al.  Melting heat transfer inside ducts and over external bodies , 1999 .

[15]  Graeme Maidment,et al.  The novel use of phase change materials in refrigeration plant. Part 3: PCM for control and energy savings , 2007 .

[16]  Luisa F. Cabeza,et al.  Experimental study of using PCM in brick constructive solutions for passive cooling , 2010 .

[17]  Alan Fuchs,et al.  Polymeric phase change composites for thermal energy storage , 2004 .

[18]  Wasim Saman,et al.  Analysis and modelling of a phase change storage system for air conditioning applications , 2001 .

[19]  Tarik Kousksou,et al.  Dynamic modelling of the storage of an encapsulated ice tank , 2005 .

[20]  M. Pyda,et al.  DSC approach for the investigation of mobile water fractions in aqueous solutions of NaCl and Tris buffer , 2007 .

[21]  Denis Leducq,et al.  Enhancing the performance of household refrigerators with latent heat storage: An experimental investigation , 2009 .

[22]  Viktoria Martin,et al.  Direct contact PCM-water cold storage , 2010 .

[23]  Fredrik Setterwall,et al.  Phase transition temperature ranges and storage density of paraffin wax phase change materials , 2004 .

[24]  Kamal Abdel Radi Ismail,et al.  A parametric study on ice formation inside a spherical capsule , 2003 .

[25]  Luisa F. Cabeza,et al.  Thermal analysis of including phase change material in a domestic hot water cylinder , 2011 .

[26]  Luigi De Nardo,et al.  Phase change material cellulosic composites for the cold storage of perishable products: From material preparation to computational evaluation , 2012 .

[27]  Wang Suying,et al.  Notice of RetractionStudy on Ice Storage Characteristics of a Small-scale Storage Tank Filled with Ice Balls , 2010, 2010 Asia-Pacific Power and Energy Engineering Conference.

[28]  Chetan Tulapurkar,et al.  Phase Change Materials For Domestic Refrigerators To Improve Food Quality And Prolong Compressor Off Time , 2010 .

[29]  Satya Narayan Naik,et al.  Solar dryer with thermal energy storage systems for drying agricultural food products: A review , 2010 .

[30]  R. Viskanta,et al.  Heat transfer during the melting of ice around a horizontal, isothermal cylinder , 1986 .

[31]  Graeme Maidment,et al.  The novel use of phase change materials in refrigeration plant. Part 1: Experimental investigation , 2007 .

[32]  C. Körber,et al.  Extended phase diagrams for the ternary solutions H2O-NaCl-glycerol and H2O-NaCl-hydroxyethylstarch (HES) determined by DSC , 1987 .

[33]  Solid/liquid phase-change heat transfer around two horizontal, vertically spaced cylinders -- An experimental study on the effect of density inversion of water , 1995 .

[34]  I. Eames,et al.  Freezing and melting of water in spherical enclosures of the type used in thermal (ice) storage systems , 2002 .

[35]  Pradeep Bansal,et al.  Effect of door opening and defrost cycle on a freezer with phase change panels , 2010 .

[36]  Falin Chen,et al.  Experimental study of directional solidification of aqueous ammonium chloride solution , 1991, Journal of Fluid Mechanics.

[37]  O. Yatsenko,et al.  Ice Melting and Crystallization in Binary Water–Salt Systems , 2002 .

[38]  Hiroyuki Kumano,et al.  Formulation of the latent heat of fusion of ice in aqueous solution , 2009 .

[39]  R. Velraj,et al.  Effect of porosity and the inlet heat transfer fluid temperature variation on the performance of cool thermal energy storage system , 2007 .

[40]  Mousa M. Mohamed.  Solidification of phase change material on vertical cylindrical surface in holdup air bubbles , 2005 .

[41]  Luisa F. Cabeza,et al.  Materials used as PCM in thermal energy storage in buildings: A review , 2011 .

[42]  H. Takeuchi,et al.  An evaluation of microencapsulated PCM for use in cold energy transportation medium , 1996, IECEC 96. Proceedings of the 31st Intersociety Energy Conversion Engineering Conference.

[43]  Mousa K. Abu-Arabi,et al.  Phase change cool storage using dimethyl-sulfoxide , 1998 .

[44]  David C. Onyejekwe.  Cold storage using eutectic mixture of NaCl/H2O: An application to photovoltaic compressor vapour freezers , 1989 .

[45]  M. Dimaano,et al.  The capric–lauric acid and pentadecane combination as phase change material for cooling applications , 2002 .

[46]  Yanzhong Li,et al.  Experimental study on liquid/solid phase change for cold energy storage of Liquefied Natural Gas (LNG) refrigerated vehicle , 2010 .

[47]  M. Dimaano,et al.  Performance investigation of the capric and lauric acid mixture as latent heat energy storage for a cooling system , 2002 .

[48]  Dong Won Lee,et al.  STUDY ON THE CRITICAL CONDITIONS OF ICE FORMATION FOR CONTINUOUS ICE MAKING SYSTEM IN A COLLING PIPE , 1996 .

[49]  Hiroyuki Kumano,et al.  Study on latent heat of fusion of ice in aqueous solutions , 2007 .

[50]  Yingxin Zhu,et al.  Modeling of thermal processes for internal melt ice-on-coil tank including ice-water density difference , 2001 .

[51]  Dong Won Lee,et al.  Heat transfer characteristics of the ice slurry at melting process in a tube flow , 2006 .

[52]  Aytunç Erek,et al.  Experimental and numerical study on charging processes of an ice‐on‐coil thermal energy storage system , 2007 .

[53]  F. T. Gucker,et al.  Refrigerating Capacity of Two-Component Systems , 1948 .

[54]  Liwu Fan,et al.  Thermal conductivity enhancement of phase change materials for thermal energy storage: A review , 2011 .

[55]  Levent Bilir,et al.  Total solidification time of a liquid phase change material enclosed in cylindrical/spherical containers , 2005 .

[56]  J. Dantzig,et al.  A quantitative analysis on latent heat of an aqueous binary mixture. , 2006, Cryobiology.

[57]  Xu Liu,et al.  Experimental study on cool storage air-conditioning system with spherical capsules packed bed , 2010 .

[58]  Amar M. Khudhair,et al.  A review on phase change energy storage: materials and applications , 2004 .

[59]  G. Fang,et al.  Thermal performance simulations of a packed bed cool thermal energy storage system using n-tetradecane as phase change material , 2010 .

[60]  J. Fukai,et al.  Effect of carbon-fiber brushes on conductive heat transfer in phase change materials , 2002 .

[61]  X. Py,et al.  Paraffin/porous-graphite-matrix composite as a high and constant power thermal storage material , 2001 .

[62]  Melting of a Vertical Ice Wall by Free Convection into Fresh Water , 1981 .

[63]  A. Saito,et al.  Phase Change Characteristics of TES Materials with Heterogeneous Composite Materials , 2011 .

[64]  Sih-Li Chen,et al.  An experimental investigation of cold storage in an encapsulated thermal storage tank , 2000 .

[65]  T. Hirata,et al.  Effects of poly-vinyl alcohol on supercooling phenomena of water , 2009 .

[66]  Martin Belusko,et al.  Effectiveness–NTU correlation for low temperature PCM encapsulated in spheres , 2012 .

[67]  Ibrahim Dincer,et al.  Energetic, environmental and economic aspects of thermal energy storage systems for cooling capacity , 2001 .

[68]  Kamal Abdel Radi Ismail,et al.  Thermal performance of a pcm storage unit , 1999 .

[69]  Heat transfer enhancement in the direct contact melting process , 1992 .

[70]  Jamil A. Khan,et al.  ENHANCEMENT OF HEAT TRANSFER BY INSERTING A METAL MATRIX INTO A PHASE CHANGE MATERIAL , 1996 .

[71]  T. Newell,et al.  Thermal performance of microencapsulated phase change material slurry in turbulent flow under constant heat flux , 2007 .

[72]  Harald Mehling,et al.  New method to evaluate the heat storage density in latent heat storage for arbitrary temperature ranges , 2010 .

[73]  F. L. Tan,et al.  Solidification inside a sphere—an experimental study , 2006 .

[74]  T. Hirata,et al.  Study on specific enthalpy of ice including solute in aqueous solution , 2010 .

[75]  Amir Faghri,et al.  Heat transfer enhancement in latent heat thermal energy storage system by using the internally finned tube , 1996 .

[76]  Amr Owes Elsayed,et al.  Numerical study of ice melting inside rectangular capsule under cyclic temperature of heat transfer fluid , 2007 .

[77]  R. Velraj,et al.  Performance analysis on industrial refrigeration system integrated with encapsulated PCM‐based cool thermal energy storage system , 2007 .

[78]  R. Viskanta,et al.  A numerical analysis of solid-liquid phase change heat transfer around a single and two horizontal, vertically spaced cylinders in a rectangular cavity , 1997 .

[79]  Xin Wang,et al.  Experimental research on laminar flow performance of phase change emulsion , 2006 .

[80]  Graeme Maidment,et al.  The novel use of phase change materials in refrigeration plant. Part 2: Dynamic simulation model for the combined system , 2007 .

[81]  Wasim Saman,et al.  Development of a novel refrigeration system for refrigerated trucks incorporating phase change material , 2012 .

[82]  Luisa F. Cabeza,et al.  Heat transfer enhancement in water when used as PCM in thermal energy storage , 2002 .

[83]  M. Kenisarin.  High-temperature phase change materials for thermal energy storage , 2010 .

[84]  L. Cabeza,et al.  Experimentation with a water tank including a PCM module , 2006 .

[85]  Tetsuo Hirata,et al.  Analysis of natural convection melting inside isothermally heated horizontal rectangular capsule , 1993 .

[86]  Y. Hatate,et al.  THERMAL PROPERTIES OF MULTICOMPONENT FATTY ACIDS AS SOLID-LIQUID PHASE CHANGE MATERIALS FOR COOLING APPLICATIONS , 2007 .

[87]  K. Ismail.  Analysis of a latent heat cold storage unit , 1997 .

[88]  Freezing and Thawing Heat Transfer With Water Flow Around Isothermally Cooled Cylinders in Staggered and Aligned Arrangements , 1992 .

[89]  Luisa F. Cabeza,et al.  Review on thermal energy storage with phase change: materials, heat transfer analysis and applications , 2003 .

[90]  Y. Bi,et al.  Influences of additives on the gas hydrate cool storage process in a new gas hydrate cool storage system , 2006 .

[91]  J. Lowengrub,et al.  Measurement and numerical analysis of freezing in solutions enclosed in a small container , 2002 .

[92]  Saffa Riffat,et al.  Experimental investigation of a thermoelectric refrigeration system employing a phase change material integrated with thermal diode (thermosyphons) , 2001 .

[93]  Martin Belusko,et al.  Maximisation of heat transfer in a coil in tank PCM cold storage system , 2011 .

[94]  H. Inaba,et al.  Preventing Agglomeration and Growth of Ice Particles in Water with Suitable Additives , 2005 .

[95]  Chii-Dong Ho,et al.  Evaluation of a Recirculation Scheme for Ice Storage Melting with Air as the Working Fluid , 2008 .

[96]  Y. Bi,et al.  Experimental study on cool release process of gas-hydrate with additives , 2009 .

[97]  S. H. Choi,et al.  Thermal characteristics of paraffin in a spherical capsule during freezing and melting processes , 2000 .

[98]  Aytunç Erek,et al.  Experimental and numerical investigation of thermal energy storage with a finned tube , 2005 .

[99]  I. Eames,et al.  Experiments on charging and discharging of spherical thermal (ice) storage elements , 2002 .

[100]  T. Asaoka,et al.  Effect of temperature on the effective latent heat of fusion of ice in aqueous solutions , 2010 .

[101]  Mohammed M. Farid,et al.  The use of PCM panels to improve storage condition of frozen food. , 2010 .

[102]  Mario A. Medina,et al.  Reducing Heat Transfer Across the Insulated Walls of Refrigerated Truck Trailers by the Application of Phase Change Materials , 2010 .

[103]  Bo He,et al.  Technical grade paraffin waxes as phase change materials for cool thermal storage and cool storage systems capital cost estimation , 2002 .

[104]  Luisa F. Cabeza,et al.  Overview of thermal energy storage (TES) potential energy savings and climate change mitigation in Spain and Europe , 2011 .

[105]  Experimental study on heat capacity of paraffin/water phase change emulsion , 2010 .

[106]  Martin Belusko,et al.  Experimental investigation of tubes in a phase change thermal energy storage system , 2012 .

[107]  Luisa F. Cabeza,et al.  State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization , 2010 .

[108]  Adrian Bejan,et al.  The Melting of an Ice Shell on a Heated Horizontal Cylinder , 1994 .

[109]  T. Rades,et al.  Determination of unfrozen matrix concentrations at low temperatures using stepwise DSC , 2004 .

[110]  S. C. Solanki,et al.  Heat transfer characteristics of thermal energy storage system using PCM capsules: A review , 2008 .

[111]  Terumi Inagaki,et al.  Study on the efficiency of effective thermal conductivities on melting characteristics of latent heat storage capsules , 2005 .

[112]  Marcel Lacroix,et al.  Study of the thermal behavior of a latent heat cold storage unit operating under frosting conditions , 2003 .

[113]  A. Saito.  Recent advances in research on cold thermal energy storage , 2002 .

[114]  Luisa F. Cabeza,et al.  State of the art on high-temperature thermal energy storage for power generation. Part 2--Case studies , 2010 .

[115]  Sunil Kumar Singal,et al.  Review of mathematical modeling on latent heat thermal energy storage systems using phase-change material , 2008 .

[116]  H. Inaba,et al.  Flow and Cold Heat-Storage Characteristics of Phase-Change Emulsion in a Coiled Double-Tube Heat Exchanger , 1995 .

[117]  Saffa Riffat,et al.  A novel thermoelectric refrigeration system employing heat pipes and a phase change material: an experimental investigation , 2001 .

[118]  L. Cabeza,et al.  Heat and cold storage with PCM: An up to date introduction into basics and applications , 2008 .

[119]  A. Abhat.  Low temperature latent heat thermal energy storage: Heat storage materials , 1983 .

[120]  Kamal Abdel Radi Ismail,et al.  Numerical and experimental study of spherical capsules packed bed latent heat storage system , 2002 .

[121]  Kamal Abdel Radi Ismail,et al.  Solidification of pcm inside a spherical capsule , 2000 .

[122]  Jean-Pierre Bédécarrats,et al.  Phase-change thermal energy storage using spherical capsules: performance of a test plant , 1996 .