Numerical investigations on the implication of hydrogen fuel jet injection pressure on the performance characteristics in a multi-strut in a double-dual cavity-based scramjet combustor

[1]  Wei Huang,et al.  Numerical investigation on mixing improvement mechanism of transverse injection based scramjet combustor , 2021 .

[2]  Hong-bo Wang,et al.  Numerical study on the mixing and evaporation process of a liquid kerosene jet in a scramjet combustor , 2021, Aerospace Science and Technology.

[3]  K. Pandey,et al.  Implication of self-throttling on combustion performance in a strut-based scramjet combustor , 2021 .

[4]  Qiang Chen,et al.  Numerical evaluation of shock wave effects on turbulent mixing layers in a scramjet combustor , 2021 .

[5]  P. Randive,et al.  LES study on the effect of cavity configuration on combustion characteristics of a scramjet combustor with air-throttling , 2021 .

[6]  Hong-bo Wang,et al.  Effect of fuel injection distance and cavity depth on the mixing and combustion characteristics of a scramjet combustor with a rear-wall-expansion cavity , 2021 .

[7]  Obula Reddy Kummitha,et al.  Effect of a revolved wedge strut induced mixing enhancement for a hydrogen fueled scramjet combustor , 2021 .

[8]  A. Athithan,et al.  The Combustion Characteristics of Double Ramps in a Strut-Based Scramjet Combustor , 2021, Energies.

[9]  Jun-tao Chang,et al.  Research on combustion performance optimization in scramjet combustor with strut/wall combined fuel injection scheme , 2021 .

[10]  K. Pandey,et al.  Implication of geometrical configuration of cavity on combustion performance in a strut-based scramjet combustor , 2021 .

[11]  K. Pandey,et al.  Computational investigation of mixing performance on the effects of innovative transverse fuel injection system in parallel fuel injection based scramjet combustor , 2020 .

[12]  P. Domingo,et al.  Analysis of combustion modes in a cavity based scramjet , 2020, Combustion and Flame.

[13]  Zhenguo Wang,et al.  Combustion modes periodical transition in a hydrogen-fueled scramjet combustor with rear-wall-expansion cavity flameholder , 2020 .

[14]  Zhiwei Huang,et al.  Numerical investigations of mixed supersonic and subsonic combustion modes in a model combustor , 2020 .

[15]  K. Pandey,et al.  Numerical investigation on implication of dual cavity on combustion characteristics in strut based scramjet combustor , 2019 .

[16]  K. Jayaraman,et al.  The Effect of Transverse Injection Upstream of an Axisymmetric Aft Wall Angled Cavity in a Supersonic Flow Field , 2019, Journal of Physics: Conference Series.

[17]  Yingkun Li,et al.  Numerical investigation on the performance of scramjet combustor with a novel strut configuration , 2019, Applied Thermal Engineering.

[18]  K. Pandey,et al.  Numerical investigation on mixing behavior of fuels inreacting and non-reacting flow condition of a cavity-strut based scramjet combustor , 2019, International Journal of Hydrogen Energy.

[19]  Rajiv Kumar,et al.  Supersonic combustion of hydrogen using an improved strut injection scheme , 2019, International Journal of Hydrogen Energy.

[20]  M. Boroomand,et al.  Investigation of k-ε Turbulent Models and Their Effects on Offset Jet Flow Simulation , 2019, Civil Engineering Journal.

[21]  Chang Su,et al.  Numerical and Experimental Research on Convergence Angle of Wet Sprayer Nozzle , 2018, Civil Engineering Journal.

[22]  Zun Cai,et al.  Effect of cavity geometry on fuel transport and mixing processes in a scramjet combustor , 2018, Aerospace Science and Technology.

[23]  Zhenqing Liu,et al.  Numerical Study of the Flow Fields in Downburst with Consideration of the Rough Condition on the Ground , 2018, Civil Engineering Journal.

[24]  E. N. Lay,et al.  A CFD Study of Industrial Double-Cyclone in HDPE Drying Process , 2018 .

[25]  K. Jayaraman,et al.  Effect of Axisymmetric Aft Wall Angle Cavity in Supersonic Flow Field , 2018 .

[26]  S Jeyakumar,et al.  Experimental study on the characteristics of axisymmetric cavity actuated supersonic flow , 2017 .

[27]  Zhenguo Wang,et al.  Large eddy simulation of cavity-stabilized hydrogen combustion in a diverging supersonic combustor , 2017 .

[28]  Chun-bo Hu,et al.  Effect of parallel-jet addition on the shock train characteristics in a central-strut isolator by detached eddy simulation , 2017 .

[29]  M. Deepu,et al.  Numerical simulation of high speed reacting shear layers using AUSM+- up scheme-based unstructured finite volume method solver , 2017, Int. J. Model. Simul. Sci. Comput..

[30]  Peng Zhang,et al.  Numerical Investigation on Flame Stabilization in DLR Hydrogen Supersonic Combustor with Strut Injection , 2017 .

[31]  Gautam Choubey,et al.  Effect of different strut + wall injection techniques on the performance of two-strut scramjet combustor , 2017 .

[32]  Weidong Liu,et al.  Characterization of kerosene distribution around the ignition cavity in a scramjet combustor , 2017 .

[33]  Lei Shi,et al.  Simulations of combustion oscillation and flame dynamics in a strut-based supersonic combustor , 2017 .

[34]  A. De,et al.  Investigation of strut-ramp injector in a Scramjet combustor: Effect of strut geometry, fuel and jet diameter on mixing characteristics , 2017, 2102.13275.

[35]  Mojtaba Tahani,et al.  Turbulent jet in crossflow analysis with LES approach , 2016 .

[36]  Zhenguo Wang,et al.  Large Eddy Simulation of the fuel transport and mixing process in a scramjet combustor with rearwall-expansion cavity , 2016 .

[37]  Wei Huang.  Investigation on the effect of strut configurations and locations on the combustion performance of a typical scramjet combustor , 2015 .

[38]  Debasis Chakraborty,et al.  Numerical exploration of mixing and combustion in ethylene fueled scramjet combustor , 2015 .

[39]  Xianggeng Wei,et al.  Large eddy simulation of flame structure and combustion mode in a hydrogen fueled supersonic combustor , 2015 .

[40]  Ryan J Clark,et al.  A review of numerical simulation and modeling of combustion in scramjets , 2015 .

[41]  Ning Qin,et al.  Large eddy simulation of a hydrogen-fueled scramjet combustor with dual cavity , 2015 .

[42]  Sudipto Das,et al.  Application of CFD and the Kriging method for optimizing the performance of a generic scramjet combustor , 2014 .

[43]  V. Yang,et al.  Ignition Transients in a Scramjet Engine with Air Throttling Part 1: Nonreacting Flow , 2014 .

[44]  C. Fureby,et al.  A computational study of supersonic combustion behind a wedge-shaped flameholder , 2014 .

[45]  Daniel R. Montes.  Mixing Effects of Pylon-Aided Fuel Injection Located Upstream of a Flameholding Cavity in Supersonic Flow , 2012 .

[46]  Wei Huang,et al.  Parametric effects on the combustion flow field of a typical strut-based scramjet combustor , 2011 .

[47]  Antonella Ingenito,et al.  Hydrogen/air supersonic combustion for future hypersonic vehicles , 2011 .

[48]  Sang-Hyeon Lee.  Mixing Augmentation with Cooled Pylon Injection in Scramjet Combustor , 2012 .

[49]  Wei Huang,et al.  Effect of cavity flame holder configuration on combustion flow field performance of integrated hypersonic vehicle , 2010 .

[50]  Mark Gruber,et al.  Swept-Leading-Edge Pylon Effects on a Scramjet Pylon-Cavity Flameholder Flowfield , 2009 .

[51]  V. Babu,et al.  Investigation of the effect of chemistry models on the numerical predictions of the supersonic combustion of hydrogen , 2009 .

[52]  S. Menon,et al.  Simulation of Turbulent Mixing Behind a Strut Injector in Supersonic Flow , 2009 .

[53]  David W. Zingg,et al.  A perspective on turbulence models for aerodynamic flows , 2009 .

[54]  Campbell D. Carter,et al.  Experimental Studies of Pylon-Aided Fuel Injection into a Supersonic Crossflow , 2008 .

[55]  Manfred Aigner,et al.  Numerical Investigation of Mixing and Combustion Enhancement in Supersonic Combustors by Strut Induced Streamwise Vorticity , 2008 .

[56]  Mark Gruber,et al.  Pylon Fuel Injector Design for a Scramjet Combustor (Postprint) , 2007 .

[57]  S. Jeyakumar,et al.  Experimental Investigations on Supersonic Stream Past Axisymmetric Cavities , 2005 .

[58]  Ronald K. Hanson,et al.  Cavity Flame-Holders for Ignition and Flame Stabilization in Scramjets: An Overview , 2001 .

[59]  Michael Oevermann,et al.  Numerical investigation of turbulent hydrogen combustion in a SCRAMJET using flamelet modeling , 2000 .

[60]  Goro Masuya,et al.  Ignition and Combustion Performance of Scramjet Combustors with Fuel Injection Struts , 1995 .

[61]  W. Waidmann,et al.  An experimental investigation of the combustion of a hydrogen jet injected parallel in a supersonic air stream , 1991 .

[62]  B. Hjertager,et al.  On mathematical modeling of turbulent combustion with special emphasis on soot formation and combustion , 1977 .

[63]  Louis Viaud,et al.  Application of Supersonic Combustion to Ramjets , 1966 .