A five/nine-level twelve-switch neutral point clamped inverter for high speed electric drives

A twelve-switch, three phase, five/nine level inverter is presented for applications using a high speed electric machine with a relatively low per-unit leakage reactance. By reducing the voltage blocking requirement of the semiconductors, the neutral point clamped variant of the coupled inductor inverter topology (NPC-CI) is more suited to high DC bus voltages, and features a significant reduction in magnetic material required over six-switch coupled inductor inverters. This paper describes the operational and design techniques for the NPC-CI inverter. A simple continuous PWM technique for operation with a three-limb core is presented and the specific design challenges involved in the NPC-CI inverter are highlighted: designing the three-limb coupled inductor, the natural balancing action of the split-dc link, semiconductor stresses, inverter construction and practical considerations for inverter operation of the drive. Machine performance is then illustrated on an unloaded 18,000 rpm 15HP induction machine to emphasize the harmonic quality improvement, and on a loaded 2HP utility speed induction machine to demonstrate transient performance.

[1]  Kaushik Rajashekara,et al.  Power Electronics and Motor Drives in Electric, Hybrid Electric, and Plug-In Hybrid Electric Vehicles , 2008, IEEE Transactions on Industrial Electronics.

[2]  Pablo Lezana,et al.  Hybrid multilevel inverter drive with synchronous modulation and current waveform improvement , 2009, 2009 IEEE International Electric Machines and Drives Conference.

[3]  Leon M. Tolbert,et al.  Multilevel inverters for electric vehicle applications , 1998, Power Electronics in Transportation (Cat. No.98TH8349).

[4]  S. Bernet,et al.  A comparison of three-level converters versus two-level converters for low-voltage drives, traction, and utility applications , 2005, IEEE Transactions on Industry Applications.

[5]  Frede Blaabjerg,et al.  Multilevel inverter by cascading industrial VSI , 2002, IEEE Trans. Ind. Electron..

[6]  Mark Matthew Flynn,et al.  A methodology for evaluating and reducing rotor losses, heating, and operational limitations of high-speed flywheel batteries , 2003 .

[7]  D.O. Neacsu,et al.  Selection of the PWM algorithm for 3-phase interleaved converters , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[8]  Jun Liang,et al.  Modified Phase-Shifted PWM Control for Flying Capacitor Multilevel Converters , 2007, IEEE Transactions on Power Electronics.

[9]  Perry Tsao,et al.  An integrated flywheel energy storage system with homopolar inductor motor/generator and high-frequency drive , 2003 .

[10]  I. Barbi,et al.  Three-phase multilevel bidirectional DC-AC converter using three-phase coupled inductors , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[11]  Jeffrey Ewanchuk,et al.  Multi-carrier interleaved PWM strategies for a new five-level NPC inverter using a 3-phase coupled inductor , 2010, 2010 IEEE Energy Conversion Congress and Exposition.

[12]  Jing Zhao,et al.  A Novel PWM Control Method for Hybrid-Clamped Multilevel Inverters , 2010, IEEE Transactions on Industrial Electronics.

[13]  Dushan Boroyevich,et al.  Impact of Interleaving on AC Passive Components of Paralleled Three-Phase Voltage-Source Converters , 2010, IEEE Transactions on Industry Applications.

[14]  Nicola Bianchi,et al.  Potentials and limits of high speed PM motors , 2003 .

[15]  D. Boroyevich,et al.  Failure-Mode Analysis and Protection of Three-Level Neutral-Point-Clamped PWM Voltage Source Converters , 2010, IEEE Transactions on Industry Applications.

[16]  Ji-Yoon Yoo,et al.  Practical Implementation of PWM Synchronization and Phase-Shift Method for Cascaded H-Bridge Multilevel Inverters Based on a Standard Serial Communication Protocol , 2008, IEEE Transactions on Industry Applications.

[17]  Andrew M. Knight,et al.  Performance of a High-Speed Motor Drive System Using a Novel Multilevel Inverter Topology , 2009 .

[18]  Thomas A. Lipo,et al.  A three-level MOSFET inverter for low-power drives , 2004, IEEE Transactions on Industrial Electronics.

[19]  F. Forest,et al.  Design and Comparison of Inductors and Intercell Transformers for Filtering of PWM Inverter Output , 2009, IEEE Transactions on Power Electronics.

[20]  G. Stanley,et al.  Precision DC-to-AC power conversion by optimization of the output current waveform-the half-bridge revisited , 1997 .

[21]  Tsung-Po Chen.  Dual-Modulator Compensation Technique for Parallel Inverters Using Space-Vector Modulation , 2009, IEEE Transactions on Industrial Electronics.

[22]  Holmes,et al.  Pulse width modulation for power converters , 2003 .

[23]  Jian Sun,et al.  Asymmetric interleaving — a new approach to operating parallel converters , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[24]  H. Akagi,et al.  A Transformerless Energy Storage System Based on a Cascade Multilevel PWM Converter With Star Configuration , 2008, IEEE Transactions on Industry Applications.

[25]  Leon M. Tolbert,et al.  Charge balance control schemes for cascade multilevel converter in hybrid electric vehicles , 2002, IEEE Trans. Ind. Electron..

[26]  Dongsheng Zhou,et al.  Experimental comparisons of space vector neutral point balancing strategies for three-level topology , 2001 .

[27]  N. Idir,et al.  Motor Overvoltage Limitation by Means of a New EMI-Reducing PWM Strategy for Three-Level Inverters , 2009, IEEE Transactions on Industry Applications.

[28]  Dushan Boroyevich,et al.  A comprehensive study of neutral-point voltage balancing problem in three-level neutral-point-clamped voltage source PWM inverters , 2000 .

[29]  James L. Kirtley,et al.  High-speed, high-power density PMSM drive for fuel cell powered HEV application , 2001, IEMDC 2001. IEEE International Electric Machines and Drives Conference (Cat. No.01EX485).

[30]  Kwanghee Nam,et al.  Dual-inverter control strategy for high-speed operation of EV induction motors , 2004, IEEE Transactions on Industrial Electronics.

[31]  Ivo Barbi,et al.  Three-phase NPC inverter using three-phase coupled inductor , 2009, 2009 35th Annual Conference of IEEE Industrial Electronics.

[32]  Bin Wu,et al.  Switching loss analysis of modulation methods used in neutral point clamped converters , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[33]  Mariusz Malinowski,et al.  A Survey on Cascaded Multilevel Inverters , 2010, IEEE Transactions on Industrial Electronics.

[34]  H. Akagi,et al.  A New DC-Voltage-Balancing Circuit Including a Single Coupled Inductor for a Five-Level Diode-Clamped PWM Inverter , 2011, IEEE Transactions on Industry Applications.

[35]  A.M. Knight,et al.  A compact variable speed drive for mobile flywheel energy storage systems , 2010, The XIX International Conference on Electrical Machines - ICEM 2010.

[36]  José R. Rodríguez,et al.  A Survey on Neutral-Point-Clamped Inverters , 2010, IEEE Transactions on Industrial Electronics.

[37]  J. Salmon,et al.  A Single Switch Split DC-Rail Boost Converter Topology Operated Under Steady-State Unbalanced Load Conditions in Discontinuous Conduction , 2007, IEEE Transactions on Power Electronics.