Indentation failure behavior of honeycomb sandwich panels

The failure behavior of simply supported honeycomb sandwich panels subjected to indentation loading on the top skin has been studied. A plate-on-elastic-foundation approach based on distributed load and panel-specific considerations (finite thickness and transverse shear) is developed to analyze the panel stress distribution. Panels with various glass-fibre/epoxy skins and aramid cores are analyzed by using this approach together with the finite-element analysis. Surprisingly good agreement is found between the theoretical and FEA solutions, suggesting that the model satisfactorily describes the panel indentation behavior. Indentation-induced stresses in the core relevant to the onset of indentation failure are found to depend on skin bending stiffness, core stiffness and indenter size. The calculated maximum shear and normal stress values are compared with the experimental data to assess the core failure mechanisms involved. The comparisons clearly show that core shear failure dominates the onset of indentation failure.

[1]  Ahmed K. Noor,et al.  Three-dimensional solutions for thermomechanical stresses in sandwich panels and shells , 1994 .

[2]  Thomas K. Tsotsis,et al.  Characterization of Localized Failure Modes in Honeycomb Sandwich Panels Using Indentation , 1996 .

[3]  Hugh McManus,et al.  Improved Theory for Contact Indentation of Sandwich Panels , 1996 .

[4]  Ahmed K. Noor,et al.  Computational Models for Sandwich Panels and Shells , 1996 .

[5]  S. Timoshenko,et al.  THEORY OF PLATES AND SHELLS , 1959 .

[6]  Yeoshua Frostig,et al.  Bending of Nonsymmetric Sandwich Beams with Transversely Flexible Core , 1991 .

[7]  J. R. Vinson,et al.  Optimum design of composite honeycomb sandwich panels subjected to uniaxial compression , 1986 .

[8]  K. Lingaiah,et al.  Strength and stiffness of sandwich beams in bending , 1991 .

[9]  Ole Thybo Thomsen,et al.  Analysis of local bending effects in sandwich plates with orthotropic face layers subjected to localised loads , 1993 .

[10]  S. Timoshenko,et al.  Theory of elasticity , 1975 .

[11]  O. Thomsen.  Analysis of Local Bending Effects in Sandwich Panels Subjected to Concentrated Loads , 1992 .

[12]  Serge Abrate,et al.  Localized Impact on Sandwich Structures With Laminated Facings , 1997 .

[13]  H. G. Allen.  Analysis and design of structural sandwich panels , 1969 .

[14]  I. Burgess,et al.  A theoretical approach to the deformation of honeycomb based composite materials , 1979 .

[15]  Yunliang Ding,et al.  Optimum design of honeycomb sandwich constructions with buckling constraints , 1989 .

[16]  Ole Thybo Thomsen,et al.  Theoretical and experimental investigation of local bending effects in sandwich plates , 1995 .