High performance forced air cooling scheme employing microchannel heat exchangers

In this paper, a high performance forced air cooing scheme is theoretically and experimentally investigated which employs microchannel parallel plate-fin heat sinks and tubes to deliver the air to and optionally from the heat sink. The performance of the cooling system is modeled in terms of thermal resistance, pressure drop, and pumping power. Optimizations are performed and design trade-offs discussed. Tubes are observed to have a significant impact on optimum heat sink design as well as operating point. Sample heat sinks with lateral dimensions of 5/spl times/5 cm/sup 2/ and fin lengths of 1.5 and 2.5 cm were fabricated from copper and aluminum foils using a simple assembly process. Fin thicknesses and channel widths of the heat sinks are on the order of 200 and 500 /spl mu/m, respectively. Thermal resistances as low as 0.2 R/W are measured. Results of the present study are compared to prior works dealing with direct air cooling. The thermal performances achievable using the investigated cooling approach are superior to those attainable using open air cooled heat sinks as well as those employing silicon microcoolers.

[1]  B. Gromoll,et al.  Advanced micro air-cooling systems for high density packaging , 1994, Proceedings of 1994 IEEE/CHMT 10th Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM).

[2]  R. Pease,et al.  High-performance heat sinking for VLSI , 1981, IEEE Electron Device Letters.

[3]  S. Kitajo,et al.  Development of a high performance air cooled heat sink for multi-chip modules , 1992, [1992 Proceedings] Eighth Annual IEEE Semiconductor Thermal Measurement and Management Symposium.

[4]  K. Azar,et al.  Narrow channel heat sink for cooling of high powered electronic components , 1992, [1992 Proceedings] Eighth Annual IEEE Semiconductor Thermal Measurement and Management Symposium.

[5]  C. L. Bertin,et al.  Evaluation of a three-dimensional memory cube system , 1993 .

[6]  M. Mahalingam.  Thermal management in semiconductor device packaging , 1985, Proceedings of the IEEE.

[7]  L. Mok,et al.  Thermal management of silicon-based multichip modules , 1994, Proceedings of 1994 IEEE/CHMT 10th Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM).

[8]  M. R. Vogel.  Thermal performance of air-cooled hybrid heat sinks for a low velocity environment , 1994, Proceedings of 1994 IEEE/CHMT 10th Semiconductor Thermal Measurement and Management Symposium (SEMI-THERM).

[9]  Y. Hayashi,et al.  A new three dimensional IC fabrication technology, stacking thin film DUAL-CMOS layers , 1991, International Electron Devices Meeting 1991 [Technical Digest].

[10]  A. London,et al.  Compact heat exchangers , 1960 .

[11]  N. Goldberg,et al.  Narrow Channel Forced Air Heat Sink , 1984 .

[12]  S. Sommerfeldt,et al.  High performance micro-channel air cooling , 1990, Sixth Annual IEEE Proceedings Semiconductor Thermal and Temperature Measurement Symposium.

[13]  Roy W. Knight,et al.  Optimal thermal design of air cooled forced convection finned heat sinks-experimental verification , 1992 .

[14]  R. Phillips,et al.  Microchannel heat sinks , 1988 .

[15]  R. Jaeger,et al.  Heat sink optimization with application to microchannels , 1992 .