Environmental assessment of electrochromic glazing production

Abstract The life cycle analysis method was used to determine the environmental impacts associated with the production of an electrochromic (EC) glazing (called ECD). This paper describes the inventory analysis for all the basic materials used during the manufacture of the ECD, i.e. K-Glass, tungsten oxide (WO 3 ), poly-methyl methacrylate (PMMA), propylene carbonate (PC), lithium perchlorate (LiClO 4 ) and acetic silicone sealant. K-Glass, PC and PMMA account for the 98% of the total device mass and the CO 2 emissions during their production processes are 810 g. The total embodied energy was estimated to be 49 MJ/ECD, with 32.1 MJ/unit of them derived from the K-Glass. The comparison of the total embodied energies of the ECD and various insulating glass units concluded that mass-produced EC glazings could easily compete with them in terms of environmental performance, anticipating cost attenuation and overall thermal and optical behavior. The above analysis could be implemented for the reduction of the embodied energy of the ECD life cycle, since it is proposed as an energy saving device.

[1]  Forbes R McDougall,et al.  Integrated Solid Waste Management: A Lifecycle Inventory , 1995 .

[2]  Tariq Muneer,et al.  Energy and environmental impact analysis of double-glazed windows , 1998 .

[3]  Philip C. Eames,et al.  Energy and Environmental life-cycle analysis of Advanced Windows , 1996 .

[4]  A. Daneo,et al.  Photometric characterization of an all solid state inorganic electrochromic large area device , 1999 .

[5]  James S. Bogard,et al.  Application of life cycle analysis: the case of green bullets , 1998 .

[6]  Vasilis Fthenakis,et al.  Photovoltaics: Environmental, Health and Safety Issues and Perspectives { , 2000 .

[7]  E. Urbansky,et al.  Perchlorate as an environmental contaminant , 2002, Environmental science and pollution research international.

[8]  Mathias Borg,et al.  Generic LCA-methodology applicable for buildings, constructions and operation services: today practice and development needs , 2003 .

[9]  W. Motzer.  Perchlorate: Problems, Detection, and Solutions , 2001 .

[10]  S. Ryding.  ISO 14042 Environmental management • Life cycle assessment • life cycle impact assessment , 1999 .

[11]  Arne Roos,et al.  A simple model for assessing the energy performance of windows , 2001 .

[12]  Joseph S. Amstock,et al.  Handbook of Adhesives and Sealants in Construction , 2000 .

[13]  K. Urbanik,et al.  Progress toward durable, cost effective electrochromic window glazings , 1999 .

[14]  W. Schubert,et al.  Tungsten blue oxide , 1995 .

[15]  Hans-Jürgen Dr. Klüppel,et al.  The Revision of ISO Standards 14040-3 - ISO 14040: Environmental management – Life cycle assessment – Principles and framework - ISO 14044: Environmental management – Life cycle assessment – Requirements and guidelines , 2005 .

[16]  Hans-Jürgen Dr. Klüppel,et al.  ISO 14041: Environmental management — life cycle assessment — goal and scope definition — inventory analysis , 1998 .

[17]  Stéphane Citherlet,et al.  Window and advanced glazing systems life cycle assessment , 2000 .

[18]  F. D. Buyl,et al.  Silicone sealants and structural adhesives , 2001 .

[19]  K. Choy.  Chemical vapour deposition of coatings , 2003 .

[20]  Spiros Papaefthimiou,et al.  Advanced electrochromic devices based on WO3 thin films , 2001 .

[21]  K. Vadasdi.  Effluent-free manufacture of ammonium paratungstate (APT) by recycling the byproducts , 1995 .

[22]  R. Sullivan,et al.  Review of electrochromic window performance factors , 1994, Other Conferences.