Structure and electrochemical performance of single-crystal Li1.05Ni0.1Mn1.9O3.98F0.02 coated by Li-La-Ti-O solid electrolyte

[1]  Y. Park,et al.  Effects of protecting layer [Li,La]TiO3 on electrochemical properties of LiMn2O4 for lithium batteries , 2011 .

[2]  Y. Park,et al.  Surface modification of Li[Ni0.3Co0.4Mn0.3]O2 cathode by Li–La–Ti–O coating , 2010 .

[3]  Hyun-Wook Lee,et al.  Ultrathin spinel LiMn2O4 nanowires as high power cathode materials for Li-ion batteries. , 2010, Nano letters.

[4]  S. R. Biaggio,et al.  Structural and electrochemical properties of the doped spinels Li1.05M0.02Mn1.98O3.98N0.02 (M = Ga3+, Al3+, or Co3+; N = S2− or F−) for use as cathode material in lithium batteries , 2010 .

[5]  Yanbin Chen,et al.  Synthesis and characterization of spinel Li1.05Cr0.1Mn1.9O4−zFz as cathode materials for lithium-ion batteries , 2010 .

[6]  Haoshen Zhou,et al.  Fast Li-Ion insertion into nanosized LiMn(2)O(4) without domain boundaries. , 2010, ACS nano.

[7]  Yasuhiro Harada,et al.  Electrochemical Kinetics and Safety of 2-Volt Class Li-Ion Battery System Using Lithium Titanium Oxide Anode , 2009 .

[8]  G. P. Kalaignan,et al.  Synthesis and electrochemical characterizations of Nano-SiO2-coated LiMn2O4 cathode materials for rechargeable lithium batteries , 2008 .

[9]  Hyun-Wook Lee,et al.  Spinel LiMn2O4 nanorods as lithium ion battery cathodes. , 2008, Nano letters.

[10]  J. Newman,et al.  Modeling the Performance of Lithium-Ion Batteries and Capacitors during Hybrid-Electric-Vehicle Operation , 2008 .

[11]  H. Jang,et al.  Improvement of capacity fading resistance of LiMn2O4 by amphoteric oxides , 2008 .

[12]  S. Jayalekshmi,et al.  Evidence of Jahn–Teller distortion in LixMn2O4 by thermal diffusivity measurements , 2008 .

[13]  Mo-hua Yang,et al.  Enhanced High-Rate Cycling Stability of LiMn2O4 Cathode by ZrO2 Coating for Li-Ion Battery , 2005 .

[14]  Soon-Gil Yoon,et al.  Characteristics of perovskite (Li0.5La0.5)TiO3 solid electrolyte thin films grown by pulsed laser deposition for rechargeable lithium microbattery , 2004 .

[15]  Jong-Wan Park,et al.  Electrochemical characteristics of Al2O3-coated lithium manganese spinel as a cathode material for a lithium secondary battery , 2004 .

[16]  A. Manthiram,et al.  Factors Influencing the Capacity Fade of Spinel Lithium Manganese Oxides , 2004 .

[17]  K. Nahm,et al.  Synthesis and Characterization of a New Spinel, Li1.02Al0.25Mn1.75 O 3.97 S 0.03, Operating at Potentials Between 4.3 and 2.4 V , 2000 .

[18]  Liquan Chen,et al.  Candidate compounds with perovskite structure for high lithium ionic conductivity , 1994 .

[19]  Michael M. Thackeray,et al.  Improved capacity retention in rechargeable 4 V lithium/lithium- manganese oxide (spinel) cells , 1994 .

[20]  J. Tarascon,et al.  THE SPINEL PHASE OF LIMN2O4 AS A CATHODE IN SECONDARY LITHIUM CELLS , 1991 .

[21]  Tsutomu Ohzuku,et al.  Electrochemistry of manganese dioxide in lithium nonaqueous cell. I: X-ray diffractional study on the reduction of electrolytic manganese dioxide , 1990 .

[22]  Michael M. Thackeray,et al.  Manganese oxides for lithium batteries , 1997 .

[23]  M. Itoh,et al.  The effect of the hydrostatic pressure on the ionic conductivity in a perovskite lanthanum lithium titanate , 1995 .

[24]  Tsutomu Ohzuku,et al.  Electrochemistry of Manganese Dioxide in Lithium Nonaqueous Cell , 1990 .