Implementation of a closed-loop structural control system using wireless sensor networks

Wireless sensor networks have rapidly matured in recent years to offer data acquisition capabilities on par with those of traditional tethered data acquisition systems. Entire structural monitoring systems assembled from wireless sensors have proven to be low-cost, easy to install and accurate. However, the functionality of wireless sensors can be further extended to include actuation capabilities. Wireless sensors capable of actuating a structure could serve as building blocks of future generations of structural control systems. In this study, a wireless sensor prototype capable of data acquisition, computational analysis and actuation is proposed for use in a real-time structural control system. The performance of a wireless control system is illustrated using a full-scale structure controlled by a semi-active magnetorheological (MR) damper and a network of wireless sensors. One wireless sensor designated as a controller automates the task of collecting state data, calculating control forces, and issuing commands to the MR damper, all in real-time. Additional wireless sensors are installed to measure the acceleration and velocity response of each system degree-of-freedom. Base motion is applied to the structure to simulate seismic excitations while the wireless control system mitigates inter-story drift response of the structure. An optimal linear quadratic regulation (LQR) solution is formulated for embedment within the computational cores of the wireless sensors.

[1]  James T. P. Yao,et al.  CONCEPT OF STRUCTURAL CONTROL , 1972 .

[2]  L. G. Jaeger,et al.  Dynamics of structures , 1990 .

[3]  B. F. Spencer,et al.  Active Structural Control: Theory and Practice , 1992 .

[4]  Takuji Kobori,et al.  Seismic response controlled structure with Active Variable Stiffness system , 1993 .

[5]  Johan Nilsson,et al.  Stochastic Analysis and Control of Real-Time Systems with Random Time Delays , 1996 .

[6]  Henri P. Gavin,et al.  Design method for high-force electrorheological dampers , 1998 .

[7]  Michael C. Constantinou,et al.  Semi-active control systems for seismic protection of structures: a state-of-the-art review , 1999 .

[8]  Takuji Kobori,et al.  Actual seismic response controlled building with semi-active damper system , 1999 .

[9]  Andrew W. Smyth,et al.  On-Line Parametric Identification of MDOF Nonlinear Hysteretic Systems , 1999 .

[10]  M. Çelebi.  Seismic instrumentation of buildings , 2000 .

[11]  Anton Cervin,et al.  Distributed Wireless Control Using Bluetooth , 2001 .

[12]  Elias B. Kosmatopoulos,et al.  Development of adaptive modeling techniques for non-linear hysteretic systems , 2002 .

[13]  Feng-Li Lian,et al.  Network design consideration for distributed control systems , 2002, IEEE Trans. Control. Syst. Technol..

[14]  B. F. Spencer,et al.  STATE OF THE ART OF STRUCTURAL CONTROL , 2003 .

[15]  Roberto Rossi,et al.  Fuzzy Chip Controllers and Wireless Links in Smart Structures , 2004 .

[16]  Hyung-Jo Jung,et al.  State-of-the-art of semiactive control systems using MR fluid dampers in civil engineering applications , 2004 .

[17]  A.G. Alleyne,et al.  Closed-loop control over wireless networks , 2004, IEEE Control Systems.

[18]  Pei-Yang Lin,et al.  System Identification and Real Application of the Smart Magneto-Rheological Damper , 2005, Proceedings of the 2005 IEEE International Symposium on, Mediterrean Conference on Control and Automation Intelligent Control, 2005..

[19]  T. T. Soong,et al.  Active, Hybrid, and Semi-active Structural Control: A Design and Implementation Handbook , 2005 .

[20]  Jerome P. Lynch,et al.  Design of a low-power wireless structural monitoring system for collaborative computational algorithms , 2005, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[21]  Jerome P. Lynch.  Design of a wireless active sensing unit for localized structural health monitoring , 2005 .

[22]  Francesco Marazzi,et al.  Technology of Semiactive Devices and Applications in Vibration Mitigation , 2006 .

[23]  Jerome P. Lynch,et al.  A summary review of wireless sensors and sensor networks for structural health monitoring , 2006 .

[24]  J.P. Lynch,et al.  Partial Decentralized Wireless Control Through Distributed Computing for Seismically Excited Civil Structures: Theory and Validation , 2007, 2007 American Control Conference.