Investigation of a drag reduction on a circular cylinder in rotary oscillation

Drag reduction in two-dimensional flow over a circular cylinder, achieved using rotary oscillation, was investigated with computational simulations. In the experiments of Tokumaru & Dimotakis (1991), this mechanism was observed to yield up to 80% drag reduction at Re = 15 000 for certain ranges of frequency and amplitude of sinusoidal rotary oscillation. Simulations with a high-resolution viscous vortex method were carried out over a range of Reynolds numbers (150–15 000) to explore the effects of oscillatory rotational forcing. Significant drag reduction was observed for a rotational forcing which had been very effective in the experiments. The impact of the forcing is strongly Reynolds number dependent. The cylinder oscillation appears to trigger a distinctive shedding pattern which is related to the Reynolds number dependence of the drag reduction. It appears that the source of this unusual shedding pattern and associated drag reduction is vortex dynamics in the boundary layer initiated by the oscillatory cylinder rotation. The practical efficiency of the drag reduction procedure is also discussed.

[1]  A. Okajima,et al.  Viscous Flow Around a Rotationally Oscillating Circular Cylinder , 1975 .

[2]  S. Taneda.  Visual Observations of the Flow past a Circular Cylinder Performing a Rotatory Oscillation , 1978 .

[3]  A. Leonard.  Vortex methods for flow simulation , 1980 .

[4]  A. Leonard,et al.  Numerical Simulation of Separated Flows , 1982 .

[5]  Claude Greengard,et al.  The core spreading vortex method approximates the wrong equation , 1985 .

[6]  P. Degond,et al.  The weighted particle method for convection-diffusion equations , 1989 .

[7]  On the wake of a cylinder with rotational oscillations , 1989 .

[8]  S. Cowley,et al.  On the use of lagrangian variables in descriptions of unsteady boundary-layer separation , 1990, Philosophical Transactions of the Royal Society of London. Series A: Physical and Engineering Sciences.

[9]  J. R. Filler,et al.  Response of the shear layers separating from a circular cylinder to small amplitude rotational oscillations , 1990 .

[10]  Control of Oscillatory Forces on a Circular Cylinder by Rotation , 1991 .

[11]  Owen M. Griffin,et al.  Review : vortex shedding lock-on and flow control in bluff body wakes , 1991 .

[12]  Active Control of the Flow Past a Cylinder Executing Rotary Motions. , 1991 .

[13]  P. Dimotakis,et al.  Rotary oscillation control of a cylinder wake , 1989, Journal of Fluid Mechanics.

[14]  P. Koumoutsakos,et al.  Boundary Conditions for Viscous Vortex Methods , 1994 .

[15]  P. Koumoutsakos,et al.  High-resolution simulations of the flow around an impulsively started cylinder using vortex methods , 1995, Journal of Fluid Mechanics.

[17]  R. Henderson.  Details of the drag curve near the onset of vortex shedding , 1995 .

[18]  P. Koumoutsakos,et al.  Simulations of the viscous flow normal to an impulsively started and uniformly accelerated flat plate , 1996, Journal of Fluid Mechanics.

[19]  Louis F. Rossi,et al.  Resurrecting Core Spreading Vortex Methods: A New Scheme that is Both Deterministic and Convergent , 1996, SIAM J. Sci. Comput..

[20]  M. N. Zakharenkov.  UNSTEADY DETACHED SEPARATION FROM A CIRCULAR CYLINDER PERFORMING ROTATIONAL OSCILLATIONS IN A UNIFORM VISCOUS INCOMPRESSIBLE FLOW , 1997 .

[21]  Louis F. Rossi,et al.  Merging Computational Elements in Vortex Simulations , 1997, SIAM J. Sci. Comput..

[22]  M. Chou.  Synchronization of vortex shedding from a cylinder under rotary oscillation , 1997 .

[23]  H. Sung,et al.  Numerical simulation of the flow behind a rotary oscillating circular cylinder , 1998 .

[24]  D. Shiels,et al.  Simulation of controlled bluff body flow with a viscous vortex method , 1998 .