Analytical model coefficient of friction (COF) of rail disc brake on the basis of multi-phase stationary tests

[1]  Jan Swevers,et al.  The generalized Maxwell-slip model: a novel model for friction Simulation and compensation , 2005, IEEE Transactions on Automatic Control.

[2]  F. Dolce,et al.  Thermal fatigue cracks of fire fighting vehicles gray iron brake discs , 2009 .

[3]  D.S. Bernstein,et al.  On the LuGre model and friction-induced hysteresis , 2006, 2006 American Control Conference.

[4]  S. C. Wu,et al.  Thermal crack growth-based fatigue life prediction due to braking for a high-speed railway brake disc , 2016 .

[5]  Adam Glowacz,et al.  Early fault diagnosis of bearing and stator faults of the single-phase induction motor using acoustic signals , 2018 .

[6]  J. Małachowski,et al.  Modeling of abrasive wear by the meshless smoothed particle hydrodynamics method , 2016 .

[7]  Paweł Baranowski,et al.  Brake system studies using numerical methods , 2013 .

[8]  Ali Belhocine,et al.  Thermomechanical modelling of dry contacts in automotive disc brake , 2012 .

[9]  Dieter Weichert,et al.  An experimental investigation of hot spots in railway disc brakes , 2004 .

[10]  K. Kulikowski,et al.  Determination of the functional and service characteristics of the pneumatic system of an agricultural tractor with mechanical brakes using simulation methods , 2015 .

[11]  S. Nosal,et al.  Wpływ wybranych napełniaczy na właściwości ciernych materiałów hamulcowych , 2009 .

[12]  B. Desmet,et al.  Thermal levels and subsurface damage induced by the occurrence of hot spots during high-energy braking , 2011 .

[13]  Franciszek Tomaszewski,et al.  Application of time–frequency analysis to the evaluation of the condition of car suspension , 2015 .

[14]  A. Toro,et al.  Friction and wear in sliding contact of cast iron against phenolic resin composites reinforced with carbonaceous fibres from plantain fibre bundles , 2013 .

[15]  G. P. Ostermeyer,et al.  A Cellular Automaton model to describe the three-dimensional friction and wear mechanism of brake systems , 2007 .

[16]  Adam Glowacz,et al.  Diagnosis of stator faults of the single-phase induction motor using acoustic signals , 2017 .

[17]  Jan Swevers,et al.  Modification of the Leuven integrated friction model structure , 2002, IEEE Trans. Autom. Control..

[18]  R. Lewis,et al.  Third body layer—experimental results and a model describing its influence on the traction coefficient , 2014 .

[19]  U. Olofsson,et al.  Temperature and Thermoelastic Instability at Tread Braking Using Cast Iron Friction Material , 2014 .

[20]  Ou Ma,et al.  An extended bristle friction force model with experimental validation , 2012 .

[21]  Zhiyong Yang,et al.  Analyzing the mechanisms of thermal fatigue and phase change of steel used in brake discs , 2015 .

[22]  M. Wiercigroch,et al.  Hysteretic effects of dry friction: modelling and experimental studies , 2008, Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[23]  M. Šraml,et al.  Elevated temperature low cycle fatigue of grey cast iron used for automotive brake discs , 2014 .

[24]  Carlos Canudas de Wit,et al.  A new model for control of systems with friction , 1995, IEEE Trans. Autom. Control..

[25]  J. Bijwe,et al.  Development of copper-free eco-friendly brake-friction material using novel ingredients , 2016 .

[26]  J. Bijwe,et al.  Influence of various metallic fillers in friction materials on hot-spot appearance during stop braking , 2011 .

[27]  Y. Desplanques,et al.  Braking performance and influence of microstructure of advanced cast irons for heavy goods vehicle brake discs , 2013 .

[28]  A. Chichinadze.  Theoretical and practical problems of thermal dynamics and simulation of the friction and wear of tribocouples , 2009 .

[29]  Oliver M. O’Reilly,et al.  Automotive disc brake squeal , 2003 .

[30]  P. Wasilewski,et al.  The numerical–experimental scheme for the analysis of temperature field in a pad-disc braking system of a railway vehicle at single braking☆ , 2016 .

[31]  Franciszek Tomaszewski,et al.  Diagnostics of automatic compensators of valve clearance in combustion engine with the use of vibration signal , 2016 .