Radiation hardness of fiber optic sensors for monitoring and remote handling applications in nuclear environments

We report on our irradiation experiments on different types of fiber-optic sensors, including three types of commercially available temperature sensors, a multimode extrinsic Fabry-Perot cavity strain sensor and fiber Bragg- gratings. For the temperature sensors, results show that gamma radiation does not interfere with the basic sensing mechanism and that the most critical component turns out to be the optical fiber itself. Semiconductor absorption temperature sensor showed no degradation up to total doses of 250 kGy, whereas the specifications of Fabry-Perot type sensor and fluorescence temperature sensors were already dramatically influenced below the kGy-level. Replacing the optical fiber by a more radiation resistant version allowed to increase the radiation hardness of the fluorescence sensors system by orders of magnitude. The use of fiber- optic sensors in the presence of neutron radiation remains compromised. Similar conclusions are valid for the Fabry- Perot type fiber-optic strain sensors. We finally show that the Bragg-grating resonance wavelength can shift with radiation dose, but that the temperature sensitivity remains unaltered.

[1]  Eizen Kimura,et al.  New techniques to apply optical fiber images guides to harsh radia-tion environments in nuclear faci , 1998 .

[2]  Patrice Mégret,et al.  Gamma radiation tests of potential optical fiber candidates for fibroscopy , 1996 .

[3]  Yuri A. Tarabrin,et al.  Fiber optic and television endoscopes for nuclear power engineering , 1994, Other Conferences.

[4]  Francis Berghmans,et al.  Evaluation of three different optical fibre temperature sensor types for application in gamma radiation environments , 1997 .

[5]  J. W. Berthold,et al.  Overview of prototype fiber optic sensors for future application in nuclear environments , 1994, Other Conferences.

[6]  Stéphane Rougeault,et al.  Optical fibre Bragg grating sensors for structure monitoring within th nuclear power plants , 1994, Other Conferences.

[7]  Francis Berghmans,et al.  Optical fiber semiconductor absorption temperature sensor for temperature monitoring in a gas-cooled nuclear reactor , 1996, Optics & Photonics.

[8]  H. Harde,et al.  Laser Cleaning of Radioactively Contaminated Surfaces , 1998, CLEO/Europe Conference on Lasers and Electro-Optics.

[9]  Harald Bueker,et al.  Fiber optic radiation sensors , 1994, Other Conferences.

[10]  Henning Henschel,et al.  Radiation hardness of present optical fibres , 1994, Other Conferences.

[11]  Richard Sharp,et al.  Radiation tolerance of components and materials in nuclear robot applications , 1996 .

[12]  C. E. Barnes,et al.  Current status of radiation effects knowledge for fiber based systems and associated components , 1993, RADECS 93. Second European Conference on Radiation and its Effects on Components and Systems (Cat. No.93TH0616-3).

[13]  T. Kawakubo,et al.  Electrical and optical properties of neutron‐irradiated GaP crystals , 1990 .

[14]  M. Douay,et al.  Behavior of Bragg gratings, written in germanosilicate fibers, against /spl gamma/-ray exposure at low dose rate , 1994, IEEE Photonics Technology Letters.

[15]  C. Belleville,et al.  White-light interferometric multimode fiber-optic strain sensor. , 1993, Optics letters.

[16]  Francis Berghmans,et al.  Space and nuclear environment tolerancing of photonic devices: three European contributions , 1997, Optics + Photonics.

[17]  Patrick E. O'Rourke,et al.  Sampling probes enhance remote chemical analyses , 1995 .

[18]  Andrew Holmes-Siedle,et al.  Radiation effects in space, nuclear power, and accelerators: impact on optics and light sensors , 1997, Optics + Photonics.

[19]  Laurent Couston,et al.  Uranium and nitrate remote sensing in the nuclear fuel cycle by time-resolved laser-induced fluorescence , 1994, Other Conferences.

[20]  John R. Redding,et al.  Advanced LWR technology for commercial application , 1994 .

[21]  J. S. Blakemore.  Semiconducting and other major properties of gallium arsenide , 1982 .

[22]  Andre Morin,et al.  Field monitoring of the ice load of an icebreaker propeller blade using fiber optic strain gauges , 1996, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[23]  Roger A. Greenwell,et al.  Development of American Society for Testing and Materials (ASTM) test procedures to measure induced ionizing radiation effects in broadband and remote Raman fiber optic spectroscopic systems , 1994, Other Conferences.

[24]  Satoshi Kakudate,et al.  Development of optical components for in-vessel viewing systems used for fusion experimental reactor , 1994, Other Conferences.