A membrane element model with bending modification for one step inverse method

A membrane element model with bending modification based on element moment equilibrium is proposed for the first time by the authors, who apply the element model in one step inverse method and simulate the forming process of a flower-shaped box using the membrane element model with and without this modification. The numerical results are compared with those of the incremental method to verify the validity of the element model developed in this paper.

[1]  Hoon Huh,et al.  Blank design and strain prediction of automobile stamping parts by an inverse finite element approach , 1997 .

[2]  Xiaoxiang Shi,et al.  Simulation of sheet metal forming by a one-step approach: choice of element , 2001 .

[3]  Hakim Naceur,et al.  Initial solution estimation to speed up inverse approach in stamping modeling , 2003 .

[4]  Ba Nghiep Nguyen,et al.  Analysis of tube hydroforming by means of an inverse approach , 2003 .

[5]  Hoon Huh,et al.  Finite element inverse analysis for the design of intermediate dies in multi-stage deep-drawing processes with large aspect ratio , 2001 .

[6]  M. Brunet,et al.  A simplified triangular shell element with a necking criterion for 3-D sheet-forming analysis , 1995 .

[7]  Hakim Naceur,et al.  SOME IMPROVEMENTS ON THE OPTIMUM PROCESS DESIGN IN DEEP DRAWING USING THE INVERSE APPROACH , 2004 .

[8]  Hakim Naceur,et al.  New Enhancements in the Inverse Approach for the Fast Modeling of Autobody Stamping Process , 2002, Int. J. Comput. Eng. Sci..

[9]  Ying Huang,et al.  A new approach to solve key issues in multi-step inverse finite-element method in sheet metal stamping , 2006 .

[10]  J. Batoz,et al.  The inverse approach with simple triangular shell elements for large strain predictions of sheet metal forming parts , 1998 .

[11]  Hoon Huh,et al.  Blank Design and Strain Estimates for Sheet Metal Forming Processes by a Finite Element Inverse Approach with Initial Guess of Linear Deformation , 1998 .

[12]  Hoon Huh,et al.  Multi-stage Inverse Analysis of Elliptic Cup Drawing with the Large Aspect Ratio , 2000 .

[13]  Hakim Naceur,et al.  Recent developments on the analysis and optimum design of sheet metal forming parts using a simplified inverse approach , 2000 .

[14]  J. M. Detraux,et al.  Finite element procedures for strain estimations of sheet metal forming parts , 1990 .

[15]  Peng Wang,et al.  Study on one-step simulation for the bending process of extruded profiles , 2009 .

[16]  Hoon Huh,et al.  Construction of sliding constraint surfaces and initial guess shapes for intermediate steps in multi-step finite element inverse analysis , 2002 .

[17]  Hakim Naceur,et al.  Optimization of drawbead restraining forces and drawbead design in sheet metal forming process , 2001 .

[18]  Hoon Huh,et al.  Three dimensional multi-step inverse analysis for the optimum blank design in sheet metal forming processes , 1998 .