Effects of the chisel edge on the chatter frequency in drilling

[1]  Ozan Tekinalp,et al.  Effects of Geometric and Process Parameters on Drill Transverse Vibrations , 1988 .

[2]  A. G. Ulsoy,et al.  COMPLEX GEOMETRY, ROTARY INERTIA AND GYROSCOPIC MOMENT EFFECTS ON DRILL VIBRATIONS , 1995 .

[3]  S. A. Tobias.  Machine-tool vibration , 1965 .

[4]  Etsuo Marui,et al.  Whirling Vibration in Drilling. Part 2: Influence of Drill Geometries, Particularly of the Drill Flank, on the Initiation of Vibration , 1986 .

[5]  Yusuf Altintas,et al.  Analytical Prediction of Stability Lobes in Milling , 1995 .

[6]  Etsuo Marui,et al.  Whirling Vibration in Drilling. Part 1: Cause of Vibration and Role of Chisel Edge , 1986 .

[7]  E. B. Magrab,et al.  Buckling loads and natural frequencies of drill bits and fluted cutters , 1984 .

[8]  A. Galip Ulsoy,et al.  Effects of Drill Vibrations on Cutting Forces and Torque , 1994 .

[9]  Ozan Tekinalp,et al.  Modeling and Finite Element Analysis of Drill Bit Vibrations , 1989 .

[10]  Etsuo Marui,et al.  Whirling Vibration in Drilling. Part 3: Vibration Analysis in Drilling Workpiece with a Pilot Hole , 1988 .

[11]  I. E. Minis,et al.  A New Theoretical Approach for the Prediction of Machine Tool Chatter in Milling , 1993 .

[12]  Keith A. Young,et al.  Analysis of Tool Oscillation and Hole Roundness Error in a Quasi-Static Model of Reaming , 2001 .

[13]  Keith A. Young,et al.  Theory of Torsional Chatter in Twist Drills: Model, Stability Analysis and Composition to Test , 2001 .

[14]  Sean G. Calvert,et al.  The Effect of Process Damping On Stability and Hole Form in Drilling , 2001 .

[15]  Sean G. Calvert,et al.  Low-Frequency Regenerative Vibration and the Formation of Lobed Holes in Drilling , 2002 .

[16]  Leonard Meirovitch,et al.  Elements Of Vibration Analysis , 1986 .