Permeabilities of methanol, ethanol and dimethyl ether in new composite membranes: A comparison with Nafion membranes

[1]  Q. Xin,et al.  Sulfonated poly (ether ether ketone)/polyvinylidene fluoride polymer blends for direct methanol fuel cells , 2006 .

[2]  Zhaolin Liu,et al.  Preparation and characterization of Pt/C and PtRu/C electrocatalysts for direct ethanol fuel cells , 2005 .

[3]  Zhang Gaowen,et al.  Organic/inorganic composite membranes for application in DMFC , 2005 .

[4]  V. Choudhary,et al.  Sulphonated poly(ether ether ketone) copolymers: Synthesis, characterisation and membrane properties , 2005 .

[5]  Qin Xin,et al.  Electrode catalysts behavior during direct ethanol fuel cell life-time test , 2005 .

[6]  Rae Duk Lee,et al.  Importance of Proton Conductivity Measurement in Polymer Electrolyte Membrane for Fuel Cell Application , 2005 .

[7]  S. Licoccia,et al.  A covalent organic/inorganic hybrid proton exchange polymeric membrane: synthesis and characterization , 2005 .

[8]  Lei Li,et al.  Sulfonated polyethersulfone Cardo membranes for direct methanol fuel cell , 2005 .

[9]  Qin Xin,et al.  Direct ethanol fuel cells based on PtSn anodes: the effect of Sn content on the fuel cell performance , 2005 .

[10]  Jung-Ki Park,et al.  Characteristics of PVdF copolymer/Nafion blend membrane for direct methanol fuel cell (DMFC) , 2004 .

[11]  B. Pivovar,et al.  Sulfonated poly(arylene ether sulfone) copolymer proton exchange membranes: composition and morphology effects on the methanol permeability , 2004 .

[12]  H. Pu,et al.  Methanol permeation and proton conductivity of acid-doped poly(N-ethylbenzimidazole) and poly(N-methylbenzimidazole) , 2004 .

[13]  Hyun Jae Kim,et al.  Nafion–Nafion/polyvinylidene fluoride–Nafion laminated polymer membrane for direct methanol fuel cells , 2004 .

[14]  G. Barra,et al.  Processing, characterization and properties of conducting polyaniline-sulfonated SEBS block copolymers , 2004 .

[15]  J. Mcgrath,et al.  Novel proton conducting sulfonated poly(arylene ether) copolymers containing aromatic nitriles , 2004 .

[16]  G. Robertson,et al.  Sulfonated poly(aryl ether ketone)s containing naphthalene moieties obtained by direct copolymerization as novel polymers for proton exchange membranes , 2004 .

[17]  Xianfeng Li,et al.  Direct synthesis of sulfonated aromatic poly(ether ether ketone) proton exchange membranes for fuel cell applications , 2004 .

[18]  Michael D. Guiver,et al.  Proton conducting membranes based on cross-linked sulfonated poly(ether ether ketone) (SPEEK) , 2004 .

[19]  I. K. Varma,et al.  Sulphonated poly(ether ether ketone): Synthesis and characterisation , 2004 .

[20]  Weijiang Zhou,et al.  Performance comparison of low-temperature direct alcohol fuel cells with different anode catalysts , 2004 .

[21]  Prabhuram Joghee,et al.  Preparation and characterization of hybrid Nafion–silica membrane doped with phosphotungstic acid for high temperature operation of proton exchange membrane fuel cells , 2004 .

[22]  G. Robertson,et al.  Synthesis and characterization of sulfonated poly(ether ether ketone) for proton exchange membranes , 2004 .

[23]  Chao-Yang Wang,et al.  Direct Dimethyl Ether Polymer Electrolyte Fuel Cells for Portable Applications , 2004 .

[24]  Yuxin Wang,et al.  Sulfonated poly(ether ether ketone) membranes for direct methanol fuel cell , 2003 .

[25]  Weijiang Zhou.  Pt based anode catalysts for direct ethanol fuel cells , 2003 .

[26]  K. Neoh,et al.  Characterization of membranes prepared from blends of poly(acrylic acid)-graft-poly(vinylidene fluoride) with poly(N-isopropylacrylamide) and their temperature- and pH-sensitive microfiltration , 2003 .

[27]  O. Park,et al.  Proton-conducting composite membranes derived from sulfonated hydrocarbon and inorganic materials , 2003 .

[28]  Michael D. Guiver,et al.  Properties of SPEEK based PEMs for fuel cell application , 2003 .

[29]  Michael A. Hickner,et al.  Fabrication and characterization of heteropolyacid (H3PW12O40)/directly polymerized sulfonated poly(arylene ether sulfone) copolymer composite membranes for higher temperature fuel cell applications , 2003 .

[30]  Lei Li,et al.  Novel proton conducting composite membranes for direct methanol fuel cell , 2003 .

[31]  M. Mulder,et al.  Characterization of polymer blends of polyethersulfone/sulfonated polysulfone and polyethersulfone/sulfonated polyetheretherketone for direct methanol fuel cell applications , 2002 .

[32]  Suzana P. Nunes,et al.  Inorganic modification of proton conductive polymer membranes for direct methanol fuel cells , 2002 .

[33]  Robert F. Savinell,et al.  Imidazole and 1-methyl imidazole in phosphoric acid doped polybenzimidazole, electrolyte for fuel cells , 2002 .

[34]  K. Kreuer.  On the development of proton conducting polymer membranes for hydrogen and methanol fuel cells , 2001 .

[35]  Theophilos Ioannides,et al.  Efficiency of a solid polymer fuel cell operating on ethanol , 2000 .

[36]  Michael D. Guiver,et al.  Proton conducting composite membranes from polyether ether ketone and heteropolyacids for fuel cell applications , 2000 .

[37]  Shimshon Gottesfeld,et al.  Methanol transport through Nafion membranes : Electro-osmotic drag effects on potential step measurements , 2000 .

[38]  M. Bartolozzi,et al.  A Comparative Investigation of Proton and Methanol Transport in Fluorinated Ionomeric Membranes , 2000 .

[39]  P. Staiti,et al.  Synthesis and characterization of proton-conducting materials containing dodecatungstophosphoric and dodecatungstosilic acid supported on silica , 1999 .

[40]  Local environment and clustering of cations in ionomers. ESR of copper(II) in Nafion swollen by water, methanol, dimethylformamide, and tetrahydrofuran , 1989 .