The Mechanical Efficiency of Harmonic Drives: A Simplified Model

Harmonic drives are widely used devices in robotic and space applications. As for any device transmitting motion, its mechanical efficiency is one of the main concern for the designer. In this paper it is proposed a new model to estimate this significant feature. The proposed approach makes use of the kinematic correspondence between the harmonic drive and an epicyclic gear train. Although the authors introduced crude approximations to describe the complex tribological phenomena during harmonic drive teeth meshing, the numerical results match the trend of experimental. In particular, assuming the harmonic drive working at the rated torque, the plots of the mechanical efficiency versus different parameters such as temperature and angular speed have been reported.

[1]  Xuesong Mei,et al.  A harmonic drive model considering geometry and internal interaction , 2017 .

[2]  Avinash Singh,et al.  An experimental investigation of spin power losses of a planetary gear set , 2015 .

[3]  Jorge Angeles,et al.  Virtual-Power Flow and Mechanical Gear-Mesh Power Losses of Epicyclic Gear Trains , 2007 .

[4]  Ferdinand Freudenstein,et al.  The Mechanical Efficiency of Epicyclic Gear Trains , 1993 .

[5]  Essam L. Esmail,et al.  Meshing Efficiency Analysis of Two Degree-of-Freedom Epicyclic Gear Trains , 2016 .

[6]  B. W. Kelley,et al.  Instantaneous Coefficients of Gear Tooth Friction , 1961 .

[7]  Shu Xiao-Long,et al.  Determination of load sharing factor for planetary gearing with small tooth number difference , 1995 .

[8]  Xiao Dong Wu,et al.  Analysis of Harmonic Gear Drive Efficiency Based on the 3D Simplified Model , 2014 .

[9]  Yunpeng Yao,et al.  Complex cycloidal tooth profile of circular spline in harmonic drive and its optimal fitting research , 2017 .

[10]  Pier Paolo Valentini,et al.  Kinematics and Enumeration of Combined Harmonic Drive Gearing , 2015 .

[11]  Zhi Chen,et al.  Dynamic Simulation of Harmonic Gear Drives Considering Tooth Profiles Parameters Optimization , 2012, J. Comput..

[12]  R. H. Macmillan.  Power Flow and Loss in Differential Mechanisms , 1961 .

[13]  Christina John,et al.  Space lubrication and performance of harmonic drive gears , 2005 .

[14]  H. H. Mabie,et al.  The measurement of static deflection in spur gear teeth , 1970 .

[15]  Ettore Pennestrì,et al.  Influence of wave generator profile on the pure kinematic error and centrodes of harmonic drive , 2016 .

[16]  Essam L. Esmail,et al.  Power losses in two-degrees-of-freedom planetary gear trains: A critical analysis of Radzimovsky’s formulas , 2018, Mechanism and Machine Theory.