Influence of displacement constraints in thermomechanical analysis of laser micro-spot welding process

Abstract The evolution of mechanical components into smaller size generating a need for microwelding of these components using laser which offers better control as compared to arc and plasma processing. The present article describes the numerical simulation of laser micro-spot welding using finite element method. A two dimensional Gaussian distributed surface heat flux as a function of time is used to perform a sequentially coupled thermal and mechanical analysis. The model is used for simulating laser micro-spot welding of stainless steel sheet under different power conditions and configurations of mechanical constraints. The temperature dependent physical properties of SS304 have been considered for the simulation and an isotropic strain hardening model has been used. The simulated weld bead dimensions have been compared with experimental results and temperature profiles have been calculated. The maximum deformation of 0.02 mm is obtained with maximum laser power of 75 W. The thermal stress is more inducing factor to temperature induced residual stresses and plastic strain as compared to mechanical constraints. The plastic strain changes significantly by displacement constraints as compared to residual stress.

[1]  A. De,et al.  Three-dimensional transient heat conduction and thermomechanical analysis for laser spot welding using adaptive heat source , 2007 .

[2]  J. Mazumder,et al.  Heat transfer model for cw laser material processing , 1980 .

[3]  P. Ferro,et al.  Microstructural, compositional and residual stress evaluation of CO2 laser welded superaustenitic AISI 904L stainless steel , 2006 .

[4]  M. Tsukamoto,et al.  Micro Welding of Thin Stainless Steel Foil with a Direct Diode Laser , 2005 .

[5]  D. Rosenthal.  Mathematical Theory of Heat Distribution during Welding and Cutting , 1941 .

[6]  Yuming Zhang,et al.  Numerical simulation of transient 3-D surface deformation of a completely penetrated GTA weld , 2004 .

[7]  Swarup Bag,et al.  A perspective review on laser assisted microjoining , 2011 .

[8]  B. Yilbas,et al.  Laser welding of low carbon steel and thermal stress analysis , 2010 .

[9]  T. Kim,et al.  Investigation on the effect of laser pulse shape during Nd:YAG laser microwelding of thin Al sheet by numerical simulation , 2002 .

[10]  S. Na,et al.  A study on heat source equations for the prediction of weld shape and thermal deformation in laser microwelding , 2002 .

[11]  Ken Watkins,et al.  Micro welding with pulsed single mode fiber lasers , 2004 .

[12]  Y. Zhou,et al.  Microjoining and Nanojoining , 2008 .

[13]  T. DebRoy,et al.  Heat transfer during Nd: Yag pulsed laser welding and its effect on solidification structure of austenitic stainless steels , 1989 .

[14]  J. Goldak,et al.  A new finite element model for welding heat sources , 1984 .

[15]  A. Okada,et al.  Micro-Welding of Copper Plate by Frequency Doubled Diode Pumped Pulsed Nd:YAG Laser , 2012 .

[16]  V. Semak,et al.  On the possibility of microwelding with laser beamsSandia is a multiprogram laboratory operated by S , 2003 .

[17]  M. Rohde,et al.  Laser micro-welding of aluminum alloys: experimental studies and numerical modeling , 2010 .

[18]  Siva Shanmugam,et al.  NUMERICAL AND EXPERIMENTAL INVESTIGATION OF LASER BEAM WELDING OF AISI 304 STAINLESS STEEL SHEET , 2008 .

[19]  E. Friedman.  Thermomechanical Analysis of the Welding Process Using the Finite Element Method , 1975 .

[20]  Renping Wang,et al.  Numerical simulation of transient temperature field during laser keyhole welding of 304 stainless steel sheet , 2011 .

[21]  Stefan Riekehr,et al.  Residual stress analysis of laser spot welding of steel sheets , 2009 .

[22]  J. Berretta,et al.  Pulsed Nd:YAG laser seam welding of AISI 316L stainless steel thin foils , 2010 .

[23]  R Kovacevic,et al.  Three-dimensional finite element modelling of laser surface modification , 2000 .

[24]  S. Katayama,et al.  In-Process Monitoring and Adaptive Control during Pulsed YAG Laser Spot Welding of Aluminum Alloy Thin Sheets , 2006 .