Interaction of Lamb mode (A(o)) with structural discontinuity and generation of "Turning modes" in a T-joint.

In the present work, the interaction of the fundamental anti-symmetric guided Lamb mode (A(o)) with a structural discontinuity in a composite structure was studied through Finite Element numerical simulations and experiments. The structural component selected for this study was a T-joint section made from glass/epoxy material. This co-cured composite structure is made-up of an upper shell (skin) and a spar as the sub-components. It was observed that when A(o) mode interacts with the junction (structural discontinuity) of these sub-components, a mode-converted S(o) mode is generated. Experiments were conducted using air-coupled ultrasound to validate the numerical simulations. The back-propagating "Turning modes", which propagate from the thin region to the spar web and vice versa, were also numerically simulated and experimentally verified.

[1]  Amjad J. Aref,et al.  A combined honeycomb and solid viscoelastic material for structural damping applications , 2003 .

[2]  J. Rose.  Ultrasonic Waves in Solid Media , 1999 .

[3]  J. Takatsubo,et al.  Lamb wave method for quick inspection of impact-induced delamination in composite laminates , 2004 .

[4]  G. Feltrin,et al.  Delamination detection in an I-section glass fiber reinforced plastic beam with an optical fiber-based stress wave method , 2009 .

[5]  D. Thompson,et al.  Review of Progress in Quantitative Nondestructive Evaluation , 1982 .

[6]  Bc Lee,et al.  Lamb wave propagation modelling for damage detection: I. Two-dimensional analysis , 2007 .

[7]  B. S. Wong,et al.  Experimental evaluation of delaminations in composite plates by the use of Lamb waves , 1995 .

[8]  Takahiro Hayashi,et al.  Multiple reflections of Lamb waves at a delamination. , 2002, Ultrasonics.

[9]  Krishnan Balasubramaniam,et al.  Interaction of guided Lamb waves with an asymmetrically located delamination in a laminated composite plate , 2010 .

[10]  K. Balasubramaniam,et al.  Interaction of the primary anti-symmetric Lamb mode (Ao) with symmetric delaminations: numerical and experimental studies , 2009 .

[11]  Fuh-Gwo Yuan,et al.  Wave reflection and transmission in composite beams containing semi-infinite delamination , 2008 .

[12]  Chunhui Yang,et al.  Assessment of delamination in composite beams using shear horizontal (SH) wave mode , 2007 .

[13]  D. Marshall,et al.  Review of progress in quantitative non-destructive evaluation: edited by D. O. Thompson and D. E. Chimenti; published by Plenum, New York, 1983; 1853 pp.; price, U.S. $225.00 , 1985 .

[14]  Lin Ye,et al.  Some aspects of numerical simulation for Lamb wave propagation in composite laminates , 2006 .

[15]  Suresh G. Advani,et al.  Process Modeling in Composites Manufacturing , 2004 .

[16]  Sabu John,et al.  Damage detection in T-joint composite structures , 2006 .

[17]  Peter Cawley,et al.  Single Sided Inspection of Composite Materials Using Air Coupled Ultrasound , 1998 .

[18]  M. Schwartz.  Encyclopedia of smart materials , 2002 .

[19]  Krishnan Balasubramaniam,et al.  Skewing of the acoustic wave energy vector in stacked 1-3 anisotropic material systems , 2000 .

[20]  P. Cawley,et al.  The interaction of Lamb waves with defects , 1992, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.