Advanced Core Design And Fuel Management For Pebble-Bed Reactors

A method for designing and optimizing recirculating pebble-bed reactor cores is presented. At the heart of the method is a new reactor physics computer code, PEBBED, which accurately and efficiently computes the neutronic and material properties of the asymptotic (equilibrium) fuel cycle. This core state is shown to be unique for a given core geometry, power level, discharge burnup, and fuel circulation policy. Fuel circulation in the pebble-bed can be described in terms of a few well?defined parameters and expressed as a recirculation matrix. The implementation of a few heat?transfer relations suitable for high-temperature gas-cooled reactors allows for the rapid estimation of thermal properties critical for safe operation. Thus, modeling and design optimization of a given pebble-bed core can be performed quickly and efficiently via the manipulation of a limited number key parameters. Automation of the optimization process is achieved by manipulation of these parameters using a genetic algorithm. The end result is an economical, passively safe, proliferation-resistant nuclear power plant.

[1]  G. I. Bell,et al.  A SIMPLE TREATMENT FOR EFFECTIVE RESONANCE ABSORPTION CROSS SECTIONS IN DENSE LATTICES , 1959 .

[2]  R. F. Benenati,et al.  Void fraction distribution in beds of spheres , 1962 .

[3]  D. Bedenig.  Ein theoretisches model zur beschreibung des kugelhaufen-fliessverhaltens im core eines kugelhaufen-reaktors , 1967 .

[4]  D. Bedenig,et al.  Parameter studies concerning the flow behaviour of a pebble with reference to the fuel element movement in the core of the THTR 300 MWe prototype reactor , 1968 .

[5]  FUEL MANAGEMENT METHODS FOR PEBBLE BED REACTORS, AND THEIR APPLICATIONS TO THE AVR. , 1969 .

[6]  PHYSICAL PROPERTIES OF THE ONCE THROUGH THEN OUT PEBBLE-BED REACTOR. , 1972 .

[7]  Luigi Massimo,et al.  Physics of High-Temperature Reactors , 1976 .

[8]  Pebble bed HTRs , 1978 .

[9]  E. Teuchert,et al.  US/FRG joint report on the pebble bed high temperature reactor resource conservation potential and associated fuel cycle costs , 1979 .

[10]  G. Breitbach,et al.  The Radiant Heat Transfer in the High Temperature Reactor Core After Failure of the Afterheat Removal Systems , 1980 .

[11]  Manson Benedict,et al.  Nuclear Chemical Engineering , 1981 .

[12]  C. L. Cowan,et al.  Modular pebble-bed reactor reforming plant design for process heat , 1982 .

[13]  H. Reutler,et al.  The modular HTR ― a new design of high-temperature pebble-bed reactor , 1983 .

[14]  M. J. Abbate,et al.  Methods of Steady-State Reactor Physics in Nuclear Design , 1983 .

[15]  M. G. Savage.  One-dimensional modeling of radial heat removal during depressurized heatup transients in modular pebble-bed and prismatic high temperature gas-cooled reactors , 1984 .

[16]  K. Kugeler,et al.  Applications of nuclear process heat , 1984 .

[17]  Sicherheitstechnische Untersuchungen zum Störfallverhalten des HTR Modul , 1985 .

[18]  R. Pruschek,et al.  The Modular High-Temperature Reactor , 1985 .

[19]  John J. Grefenstette,et al.  Optimization of Control Parameters for Genetic Algorithms , 1986, IEEE Transactions on Systems, Man, and Cybernetics.

[20]  Michael G. Izenson.  Effects of fuel particle and reactor core design on modular HTGR source terms , 1986 .

[21]  D. Filges,et al.  The Critical HTGR Test Facility KAHTER–An Experimental Program for Verification of Theoretical Models, Codes, and Nuclear Data Bases , 1987 .

[22]  T. Kindt,et al.  Analysis of Reactivity and Temperature Transient Experiments at the AVR High-Temperature Reactor , 1987 .

[23]  E. Suetomi,et al.  New method to analyze equilibrium cycle of pebble-bed reactors. , 1987 .

[24]  David E. Goldberg,et al.  Genetic Algorithms in Search Optimization and Machine Learning , 1988 .

[25]  H. Nabielek,et al.  The Performance of High-Temperature Reactor Fuel Particles at Extreme Temperatures , 1989 .

[26]  D. E. Goldberg,et al.  Genetic Algorithms in Search , 1989 .

[27]  Geoffrey T. Parks,et al.  An Intelligent Stochastic Optimization Routine for Nuclear Fuel Cycle Design , 1990 .

[28]  Paul J. Turinsky,et al.  In-core nuclear fuel management optimization for pressurized water , 1991 .

[29]  A. J. Goodjohn.  Summary of Gas-Cooled reactor programs , 1991 .

[30]  L. M. Lidsky,et al.  Design and study for an MHTGR Gas Turbine Power Plant , 1991 .

[32]  Geoffrey T. Parks,et al.  Application of genetic algorithms to in-core nuclear fuel management optimization , 1993 .

[33]  U. Ohlig,et al.  V. S. O. P. ('94) Computer Code System for Reactor Physics and Fuel Cycle Simulation , 1994 .

[34]  P. Liem.  BATAN-MPASS: A general fuel management code for pebble-bed high-temperature reactors , 1994 .

[35]  M. W. Drigert,et al.  Idaho National Engineering Laboratory , 1995 .

[36]  Madeline Anne Feltus,et al.  Nuclear fuel management optimization using genetic algorithms , 1995 .

[37]  Dan Boneh,et al.  On genetic algorithms , 1995, COLT '95.

[38]  Michael J. Gouge.  Closed Cycle Gas Turbine Nuclear Power Plant for Submarine Propulsion , 1995 .

[39]  Y. P. Mahlers.  Core loading pattern optimization based on simulated annealing and successive linear programming , 1995 .

[40]  DESIGN PROCEDURES FOR SMALL PEBBLE-BED HIGH TEMPERATURE REACTORS , 1996 .

[41]  Madeline Anne Feltus,et al.  Fuel management optimization using genetic algorithms and expert knowledge , 1996 .

[42]  Build-up of plutonium isotopes in HTR fuel elements a comparison between computed prediction and chemical analysis , 1997 .

[43]  I. Murata,et al.  Analysis of critical assembly experiments by continuous energy Monte Carlo method with statistical geometry model , 1998 .

[44]  G. A. K. Crommelin.  The NEREUS Installation — The Non-Nuclear Part (GT) , 1999 .

[45]  Andrew C. Kadak,et al.  Modular Pebble Bed Reactor , 2000 .

[46]  Pavel V. Tsvetkov,et al.  Calculation of the Dancoff Factor for Pebble Bed Reactors , 2000 .

[47]  Juan-Luis François,et al.  AXIAL: a system for boiling water reactor fuel assembly axial optimization using genetic algorithms , 2001 .

[48]  J. Oppe,et al.  MODELING OF CONTINUOUS RELOAD HTR SYSTEMS BY THE PANTHERMIX CODE SYSTEM , 2001 .

[49]  David G. Martin,et al.  Considerations pertaining to the achievement of high burn-ups in HTR fuel , 2002 .

[50]  A. I. van Heek.  ACACIA: A Small Scale Nuclear Power Plant With Cogeneration Capabilities , 2002 .

[51]  W. K. Terry,et al.  Direct Deterministic Method for Neutronics Analysis and Computation of Asymptotic Burnup Distribution in a Recirculating Pebble-Bed Reactor , 2002 .

[52]  I. Sauers,et al.  OAK RIDGE NATIONAL LABORATORY , 2002 .

[53]  W. K. Terry,et al.  Matrix Formulation of Pebble Circulation in the PEBBED Code , 2002 .

[54]  Kaifen Zuo,et al.  Overview of the 10 MW high temperature gas cooled reactor—test module project , 2002 .

[55]  Danas Ridikas,et al.  Modelling of HTRs with Monte Carlo: from a homogeneous to an exact heterogeneous core with microparticles , 2003 .

[56]  Gregory K. Miller,et al.  Key differences in the fabrication, irradiation and high temperature accident testing of US and German TRISO-coated particle fuel, and their implications on fuel performance , 2003 .

[57]  Hans D. Gougar,et al.  Conceptual Design of a Very High Temperature Pebble-Bed Reactor , 2003 .

[58]  W. A. Simon,et al.  The gas-turbine modular helium reactor , 2004 .

[59]  Hans D. Gougar,et al.  Optimal Moderation in the Pebble-Bed Reactor for Enhanced Passive Safety and Improved Fuel Utilization , 2004 .