A three-dimensional fictitious domain method for incompressible fluid flow problems

A new Galerkin finite element method for the solution of the Navier–Stokes equations in enclosures containing internal parts which may be moving is presented. Dubbed the virtual finite element method, it is based upon optimization techniques and belongs to the class of fictitious domain methods. Only one volumetric mesh representing the enclosure without its internal parts needs to be generated. These are rather discretized using control points on which kinematic constraints are enforced and introduced into the mathematical formulation by means of Lagrange multipliers. Consequently, the meshing of the computational domain is much easier than with classical finite element approaches.  First, the methodology will be presented in detail. It will then be validated in the case of the two-dimensional Couette cylinder problem for which an analytical solution is available. Finally, the three-dimensional fluid flow inside a mechanically agitated vessel will be investigated. The accuracy of the numerical results will be assessed through a comparison with experimental data and results obtained with a standard finite element method. © 1997 John Wiley & Sons, Ltd.

[1]  Philippe A. Tanguy,et al.  Tetrahedral elements for fluid flow , 1992 .

[2]  Philippe A. Tanguy,et al.  Finite element analysis of viscous mixing with a helical ribbon-screw impeller , 1992 .

[3]  R. LeVeque,et al.  A comparison of the extended finite element method with the immersed interface method for elliptic equations with discontinuous coefficients and singular sources , 2006 .

[4]  J. A. Schetz,et al.  Finite element Navier-Stokes calculation of three-dimensional turbulent flow near a propeller , 1986 .

[5]  R. Glowinski,et al.  A fictitious domain method for Dirichlet problem and applications , 1994 .

[6]  Joe F. Thompson,et al.  Automatic numerical generation of body-fitted curvilinear coordinate system for field containing any number of arbitrary two-dimensional bodies , 1974 .

[7]  D. P. Young,et al.  A locally refined rectangular grid finite element method: application to computational fluid dynamics and computational physics , 1990 .

[8]  J. Cahouet,et al.  Some fast 3D finite element solvers for the generalized Stokes problem , 1988 .

[9]  M. Fortin,et al.  Finite element simulation of dip coating, I: Newtonian fluids , 1984 .

[10]  C. Peskin,et al.  A three-dimensional computational method for blood flow in the heart. 1. Immersed elastic fibers in a viscous incompressible fluid , 1989 .

[11]  Philippe A. Tanguy,et al.  A finite element model for complex profile calibration , 1994 .

[12]  Jean Leray,et al.  Essai sur les mouvements plans d'un fluide visqueux que limitent des parois. , 1934 .

[13]  P. Raviart,et al.  Conforming and nonconforming finite element methods for solving the stationary Stokes equations I , 1973 .

[14]  R. Verfürth.  A combined conjugate gradient - multi-grid algorithm for the numerical solution of the Stokes problem , 1984 .

[15]  Jacques Periaux,et al.  Numerical simulation and optimal shape for viscous flow by a fictitious domain method , 1995 .

[16]  R. Glowinski,et al.  A fictitious domain method for external incompressible viscous flow modeled by Navier-Stokes equations , 1994 .

[17]  M. Perić,et al.  FINITE VOLUME METHOD FOR PREDICTION OF FLUID FLOW IN ARBITRARILY SHAPED DOMAINS WITH MOVING BOUNDARIES , 1990 .

[18]  Man Mohan Rai,et al.  Navier-Stokes simulations of rotor-stator interaction using patched and overlaid grids , 1985 .

[19]  Philippe A. Tanguy,et al.  An iterative implementation of the Uzawa algorithm for 3‐D fluid flow problems , 1990 .