Adequacy of reduced order models for model-based control in a urea-SCR aftertreatment system

[1]  E. Tronconi,et al.  Experimental and theoretical investigation of the dynamics of the SCR - DeNOx reaction , 1996 .

[2]  Paul M. Laing,et al.  A Simplified Approach to Modeling Exhaust System Emissions: SIMTWC , 1999 .

[3]  C. Schär,et al.  Control of a Urea SCR Catalytic Converter System for a Mobile Heavy Duty Diesel Engine , 2003 .

[4]  J. N. Chi,et al.  Modeling and Control of a Urea-SCR Aftertreatment System , 2005 .

[5]  Dennis N. Assanis,et al.  One-dimensional automotive catalyst modeling , 2005 .

[6]  A. Wokaun,et al.  Catalytic investigation of Fe-ZSM5 in the selective catalytic reduction of NOxwith NH3 , 2005 .

[7]  Lothar Mussmann,et al.  Influence of NO2 on the selective catalytic reduction of NO with ammonia over Fe-ZSM5 , 2006 .

[8]  Lino Guzzella,et al.  A Combined 3D/Lumped Modeling Approach to Ammonia SCR After-treatment Systems: Application to Mixer Designs , 2006 .

[9]  Michiel J. Van Nieuwstadt,et al.  Model Based Analysis and Control Design of a Urea-SCR deNOx Aftertreatment System , 2006 .

[10]  A. Wokaun,et al.  Isocyanic acid hydrolysis over Fe-ZSM5 in urea-SCR , 2006 .

[11]  Lothar Mussmann,et al.  Investigation of the selective catalytic reduction of NO by NH3 on Fe-ZSM5 monolith catalysts , 2006 .

[12]  Enrico Tronconi,et al.  Catalytic Mechanism, Detailed Kinetics and Converter Model for NH3-SCR of NOx Emissions from Vehicles , 2007 .

[13]  Jan Czerwinski,et al.  Diesel NO/NO2/NOX Emissions - New Experiences and Challenges , 2007 .

[14]  Fpt Frank Willems,et al.  Is Closed-Loop SCR Control Required to Meet Future Emission Targets? , 2007 .

[15]  Gordon G. Parker,et al.  Model-Based Estimation and Control System Development in a Urea-SCR Aftertreatment System , 2008 .