Thermo–hygro–mechanical modelling of self-induced stresses during the service life of RC structures

Abstract Current practices of structural design in reinforced concrete (RC) structures usually account for stresses caused by phenomena such as heat of hydration and drying shrinkage in a quite simplified manner. The present paper aims to evaluate the consequences of explicitly considering self-induced stresses, which actually vary significantly within structural cross-sections, combined with stresses caused by external loads. The used numerical framework involves the explicit calculation of the temperature field in concrete, with proper account for the heat of hydration of cement. Simultaneously, the moisture field in concrete is computed in order to ascertain the relative humidity changes in the pore structure caused by drying, and the inherent shrinkage strains. Stress calculations are made with due consideration of the evolution of mechanical properties of concrete as a function of the equivalent age, as well as relevant phenomena like creep, concrete cracking and influence of reinforcement. Two separate groups of numerical applications are presented, checking influence of the self-induced stresses: a unrestrained concrete prism usually used for shrinkage measurement, and concrete slabs subjected to external loads. Particularly for the second set of applications, the obtained results (with explicit consideration of the differential effects of self-induced stresses) are compared, in terms of cracking loads and crack propagation, to those that would be obtained by using the simplified design approach based on considering uniform shrinkage fields in concrete. It is found that the behaviour of both formulations is quite similar after crack stabilization, but may be quite distinct in the crack propagation phase.

[1]  R. De Borst,et al.  Aspects of Robust Computational Modeling for Plain and Reinforced Concrete , 1993 .

[2]  Hyo-Gyoung Kwak,et al.  Non-Structural Cracking in RC Walls: Part I. Finite Element Formulation , 2006 .

[3]  R. Borst.  Smeared cracking, plasticity, creep, and thermal loading—A unified approach , 1987 .

[4]  J. Jaccoud.  Armature minimale pour le contrôle de la fissuration des structures en béton , 1987 .

[5]  David A. Lange,et al.  Internal relative humidity and drying stress gradients in concrete , 2006 .

[6]  G. Guinea.  Modelling the fracture of concrete: the cohesive crack , 1995 .

[7]  Byung Hwan Oh,et al.  NONLINEAR ANALYSIS OF TEMPERATURE AND MOISTURE DISTRIBUTIONS IN EARLY-AGE CONCRETE STRUCTURES BASED ON DEGREE OF HYDRATION , 2003 .

[8]  Rui Faria,et al.  Modelling of concrete at early ages: Application to an externally restrained slab , 2006 .

[9]  Zdeněk P. Bažant,et al.  Mathematical modeling of creep and shrinkage of concrete , 1988 .

[10]  M. Konsta-Gdoutos.  Measuring, Monitoring and Modeling Concrete Properties , 2006 .

[11]  Zdeněk P. Baǎnt,et al.  Effect of cracking in drying and shrinkage specimens , 1982 .

[12]  E. Brühwiler,et al.  The effect of reinforcement in the new layer on hygral cracking in hybrid structural elements , 2003 .

[13]  Jin-Keun Kim,et al.  Moisture diffusion of concrete considering self-desiccation at early ages , 1999 .

[14]  S. Mahadevan,et al.  Cracking Analysis of Plain Concrete under Coupled Heat Transfer and Moisture Transport Processes , 2007 .

[15]  Günter Hofstetter,et al.  Experimental verification of a constitutive model for concrete cracking , 2001 .

[16]  L. Granger.  Comportement différé du béton dans les enceintes de centrales nucléaires , 1996 .

[17]  Miguel Azenha.  Numerical simulation of the structural behaviour of concrete since its early ages , 2012 .

[18]  Z. Bažant,et al.  Crack band theory for fracture of concrete , 1983 .

[19]  Hyo-Gyoung Kwak,et al.  Non-Structural Cracking in RC Walls: Part II. Quantitative Prediction Model , 2006 .

[20]  K. Willam,et al.  The coupling effect of drying shrinkage and moisture diffusion in concrete , 2006 .

[21]  Bernard Schrefler,et al.  Modelling creep and shrinkage of concrete by means of effective stresses , 2007 .

[22]  J. Mier,et al.  Simulation of hygral crack growth in concrete repair systems , 1997 .

[23]  W. A. Gutteridge,et al.  Influence of curing at different relative humidities upon compound reactions and porosity in Portland cement paste , 1988 .

[24]  J. Jonasson,et al.  Modelling of temperature, moisture and stresses in young concrete , 1994 .

[25]  Ian F. C. Smith,et al.  Separation of thermal and autogenous deformation at varying temperatures using optical fiber sensors , 2007 .

[26]  Jean-Michel Torrenti,et al.  Thoughts about drying shrinkage: Experimental results and quantification of structural drying creep , 1997 .

[27]  Giovanni Martinola,et al.  NUMERICAL MODEL FOR MINIMIZING RISK OF DAMAGE IN REPAIR SYSTEM , 2001 .

[28]  Peter H. Bischoff,et al.  Effects of shrinkage on tension stiffening and cracking in reinforced concrete , 2001 .

[29]  Rui Faria,et al.  Temperatures and stresses due to cement hydration on the R/C foundation of a wind tower—A case study , 2008 .

[30]  A W Beeby,et al.  CONCISE EUROCODE FOR THE DESIGN OF CONCRETE BUILDINGS. BASED ON BSI PUBLICATION DD ENV 1992-1-1: 1992. EUROCODE 2: DESIGN OF CONCRETE STRUCTURES. PART 1: GENERAL RULES AND RULES FOR BUILDINGS , 1993 .

[31]  J.G.M. van Mier,et al.  Effect of aggregates on drying shrinkage microcracking in cement-based composites , 2002 .