Pulsed plasma-assisted PVD sputter-deposited alumina thin films

[1]  Ning Li,et al.  Enhancement of aluminum oxide physical vapor deposition with a secondary plasma , 2002 .

[2]  Michael A. Lieberman,et al.  Effect of Ar addition to an O2 plasma in an inductively coupled, traveling wave driven, large area plasma source: O2/Ar mixture plasma modeling and photoresist etching , 2001 .

[3]  Sakari Ruppi,et al.  Microstructure and properties of CVD γ-Al2O3 coatings , 2001 .

[4]  A. Larsson,et al.  Chemical vapour deposition of κ-Al2O3 , 2001 .

[5]  G. Erkens,et al.  Comparative characterization of alumina coatings deposited by RF, DC and pulsed reactive magnetron sputtering , 1999 .

[6]  Sakari Ruppi,et al.  Microstructural changes in CVD κ-Al2O3 coated cutting tools during turning operations , 1999 .

[7]  V. Alfredsson,et al.  Deposition of hard crystalline Al2O3 coatings by bipolar pulsed d.c. PACVD , 1998 .

[8]  A. Larsson,et al.  Microstructural investigation of as-deposited and heat-treated CVD Al2O3 , 1997 .

[9]  Matthew C. Allan,et al.  Phase formation and mechanical properties of alumina coatings prepared at substrate temperatures less than 500 °C by ionized and conventional sputtering , 1997 .

[10]  O. Zywitzki,et al.  Correlation between structure and properties of reactively deposited Al2O3 coatings by pulsed magnetron sputtering , 1997 .

[11]  F. Fietzke,et al.  The deposition of hard crystalline Al2O3 layers by means of bipolar pulsed magnetron sputtering , 1996 .

[12]  M. Halvarsson,et al.  Microstructure and performance of CVD κ-Al2O3 multilayers , 1996 .

[13]  M. E. Graham,et al.  Reactive direct current magnetron sputtering of aluminum oxide coatings , 1995 .

[14]  A. Lichtenberg,et al.  Principles of Plasma Discharges and Materials Processing , 1994 .

[15]  D. Rowcliffe,et al.  Ultralow load indentation hardness and modulus of K – and α–Al_2O_3 CVD coatings , 1994 .

[16]  S. Vuorinen,et al.  Phase transformation in chemically vapour-deposited κ-alumina , 1992 .

[17]  D. T. Quinto,et al.  Mechanical properties, structure and performance of chemically vapor-deposited and physically vapor-deposited coated carbide tools☆ , 1988 .

[18]  J. Biersack,et al.  Sputtering studies with the Monte Carlo Program TRIM.SP , 1984 .