Enhancing performance of a linear dielectric based concentrating photovoltaic system using a reflective film along the edge

In the present study, we model and analyse the performance of a dielectric based linear concentrating photovoltaic system using ray tracing and finite element methods. The results obtained are compared with the experiments. The system under study is a linear asymmetric CPC (Compound Parabolic Concentrator) designed to operate under extreme incident angles of 0° and 55° and have a geometrical concentration ratio of 2.8×. Initial experiments showed a maximum PR (power ratio) of 2.2 compared to a non concentrating counterpart. An improvement to this has been proposed and verified by adding a reflective film along the edges of the concentrator to capture the escaping rays and minimise optical losses. The addition of the reflective film changes the incoming distribution on the solar cell. Results show an increase of 16% in the average power output while using this reflective film. On including the thermal effects it was found that the overall benefit changes to about 6% while using a reflective film. Additionally, the effects of the non-uniformity of the incoming radiation are also analysed and reported for both the cases. It is found that adding the reflective film drops the maximum power at the output by only 0.5% due to the effect of non-uniformity.

[1]  Tapas K. Mallick,et al.  Non-uniform illumination in concentrating solar cells , 2012 .

[2]  T. Mallick,et al.  Numerical modelling and experimental validation of a low concentrating photovoltaic system , 2013 .

[3]  Nabin Sarmah,et al.  Evaluation and optimization of the optical performance of low-concentrating dielectric compound parabolic concentrator using ray-tracing methods. , 2011, Applied optics.

[4]  Tapas K. Mallick,et al.  Non-concentrating and asymmetric compound parabolic concentrating building façade integrated photovoltaics: An experimental comparison , 2006 .

[5]  Philip C. Eames,et al.  Effect of inclination on the performance of CPC solar energy collectors , 1994 .

[6]  Björn Karlsson,et al.  Design of concentrating elements with CIS thin-film solar cells for facade integration , 2003 .

[7]  Daniel Chemisana,et al.  Linear Fresnel concentrators for building integrated applications , 2010 .

[8]  D. Chemisana,et al.  Electrical performance increase of concentrator solar cells under Gaussian temperature profiles , 2011 .

[9]  Tapas K. Mallick,et al.  Design and fabrication of low concentrating second generation PRIDE concentrator , 2007 .

[10]  T. Mallick,et al.  Performance analysis of a dielectric based 3D building integrated concentrating photovoltaic system , 2014 .

[11]  Philip C. Eames,et al.  Detailed parametric analyses of heat transfer in CPC solar energy collectors , 1993 .

[12]  Tapas K. Mallick,et al.  The design and experimental characterisation of an asymmetric compound parabolic photovoltaic concentrator for building façade integration in the UK , 2004 .