Solid-State Welding of Nitinol Shape Memory Alloys: A Review

[1]  K. Faes,et al.  Dissimilar friction welding of NiTi shape memory alloy and steel reinforcing bars for seismic performance , 2022, Science and Technology of Welding and Joining.

[2]  Wei Zhang,et al.  Numerical simulation of ultrasonic spot welding of superelastic NiTi alloys: Temperature distribution and deformation behavior , 2022, Journal of Manufacturing Science and Engineering.

[3]  S. Manladan,et al.  Microstructure and mechanical properties of dissimilar NiTi and 304 stainless steel joints produced by ultrasonic welding , 2022, Ultrasonics.

[4]  M. Shome,et al.  Microstructural evolution and nanoindentation study of magnetic pulse welded Nitinol and Aluminium sheets , 2021, Materials Characterization.

[5]  A. Rehman,et al.  Microstructure and Mechanical Property Correlation Between Rotary Friction Welded Nitinol–Nitinol Joints , 2021, Frontiers in Materials.

[6]  I. Karaman,et al.  Part I.: Friction stir welding of equiatomic nickel titanium shape memory alloy – microstructure, mechanical and corrosion behavior , 2021, Journal of Advanced Joining Processes.

[7]  I. Karaman,et al.  Part II.: Dissimilar friction stir welding of nickel titanium shape memory alloy to stainless steel – microstructure, mechanical and corrosion behavior , 2021, Journal of Advanced Joining Processes.

[8]  V. Kukartsev,et al.  Investigation of the Solid-Phase Joint of VT-14 Titanium Alloy with 12KH18N10T Stainless Steel Obtained by Diffusion Welding through Intermediate Layers , 2021, Metals.

[9]  Z. Zeng,et al.  Effect of Laser Surfacing on the Microstructure and Mechanical Properties of Ultrasonic Welded NiTi Joints , 2021, Journal of Manufacturing Science and Engineering.

[10]  I. Palani,et al.  Investigations on the actuation behaviour of friction stir–welded nickel titanium shape memory alloy using continuous fibre laser , 2021, Journal of Micromanufacturing.

[11]  Timing Zhang,et al.  Microstructure and mechanical properties of ultrasonic spot welding TiNi/Ti6Al4V dissimilar materials using pure Al coating , 2021 .

[12]  Yong-Song Pang,et al.  Microstructure and mechanical properties of dissimilar NiTi/Ti6Al4V joints via back-heating assisted friction stir welding , 2021 .

[13]  J.P. Oliveira,et al.  Laser welding of H-phase strengthened Ni-rich NiTi-20Zr high temperature shape memory alloy , 2021, Materials & Design.

[14]  A. Rehman,et al.  Microstructure and Mechanical Properties of Dissimilar Friction Welding Ti-6Al-4V Alloy to Nitinol , 2021 .

[15]  C. J. Li,et al.  Variable-parameter NiTi ultrasonic spot welding with Cu interlayer , 2020, Materials and Manufacturing Processes.

[16]  Jianxiong Li,et al.  High strength welding of NiTi and stainless steel by impact: Process, structure and properties , 2020 .

[17]  P. He,et al.  Low temperature joining of NiTi shape memory alloy with Au-Si isothermal solidification , 2020 .

[18]  Z. Zeng,et al.  Effects of Postweld Heat Treatment on the Phase Transformation and Mechanical Behavior of NiTi Ultrasonic Spot Welded Joints With Al Interlayer , 2020, Journal of Manufacturing Science and Engineering.

[19]  Jianxiong Li,et al.  High strength impact welding of NiTi and stainless steel wires , 2020, Smart Materials and Structures.

[20]  Z. Zeng,et al.  Ultrasonic spot welded NiTi joints using an aluminum interlayer: Microstructure and mechanical behavior , 2020 .

[21]  Timing Zhang,et al.  Microstructure, mechanical properties and transformation behavior of friction stir welded Ni50.7Ti49.3 alloy , 2020 .

[22]  Satya Prakash Rout,et al.  Effect of temperature and pressure on diffusivity of nitinol pellet bonded with steel plate , 2020 .

[23]  Wei Zhang,et al.  On the metallurgical joining mechanism during ultrasonic spot welding of NiTi using a Cu interlayer , 2020 .

[24]  M. Nili-Ahmadabadi,et al.  On the microstructure and mechanical properties of a two-way shape memory NiTi/NiTiCu bi-layer diaphragm , 2020 .

[25]  A. Cavaleiro,et al.  Follow-up structural evolution of Ni/Ti reactive nano and microlayers during diffusion bonding of NiTi to Ti6Al4V in a synchrotron beamline , 2020, Journal of Materials Processing Technology.

[26]  F. Yusof,et al.  Asymmetric local strain, microstructure and superelasticity of friction stir welded Nitinol alloy , 2019, Materials Science and Engineering: A.

[27]  I. Palani,et al.  Exploring the functional and corrosion behavior of friction stir welded NiTi shape memory alloy , 2019, Journal of Manufacturing Processes.

[28]  I. Palani,et al.  Shape memory effect, temperature distribution and mechanical properties of friction stir welded nitinol , 2019, Journal of Alloys and Compounds.

[29]  N. Schell,et al.  Laser welding of precipitation strengthened Ni-rich NiTiHf high temperature shape memory alloys: Microstructure and mechanical properties , 2019, Materials & Design.

[30]  Z.L. Ni,et al.  Ultrasonic spot welding of aluminum alloys: A review , 2018, Journal of Manufacturing Processes.

[31]  Wei Zhang,et al.  Microstructural Characterization and Mechanical Behavior of NiTi Shape Memory Alloys Ultrasonic Joints Using Cu Interlayer , 2018, Materials.

[32]  Z. Zeng,et al.  Effect of ultrasonic spot welding on the mechanical behaviour of NiTi shape memory alloys , 2018, Smart Materials and Structures.

[33]  W. Zhang,et al.  On thermomechanical behaviors of the functional graded shape memory alloy composite for jet engine chevron , 2018, Journal of Intelligent Material Systems and Structures.

[34]  J.P. Oliveira,et al.  Laser welding of Cu-Al-Be shape memory alloys: Microstructure and mechanical properties , 2018, Materials & Design.

[35]  Qiao Li,et al.  Impact butt welding of NiTi and stainless steel- An examination of impact speed effect , 2018 .

[36]  M. Nili-Ahmadabadi,et al.  A Combined Analytic, Numeric, and Experimental Investigation Performed on NiTi/NiTiCu Bi‐Layer Composites under Tensile Loading , 2018 .

[37]  Chuansong Wu,et al.  Friction stir based welding and processing technologies - processes, parameters, microstructures and applications: A review , 2017 .

[38]  Rosa Maria Mendes Miranda,et al.  Welding and Joining of NiTi Shape Memory Alloys: A Review , 2017 .

[39]  I. A. Palani,et al.  Microstructure, mechanical properties and shape memory behaviour of friction stir welded nitinol , 2017 .

[40]  Telmo G. Santos,et al.  Production of Al/NiTi composites by friction stir welding assisted by electrical current , 2017 .

[41]  Brad L. Kinsey,et al.  Shear instability of plastically-deforming metals in high-velocity impact welding , 2016 .

[42]  S. Belyaev,et al.  Bimetallic shape memory alloy composites produced by explosion welding: Structure and martensitic transformation , 2016 .

[43]  M. Vieira,et al.  Microstructural Characterization of Diffusion Bonds Assisted by Ni/Ti Nanolayers , 2016, Journal of Materials Engineering and Performance.

[44]  Rosa Maria Mendes Miranda,et al.  Martensite stabilization during superelastic cycling of laser welded NiTi plates , 2016 .

[45]  A. Tekkaya,et al.  Vaporizing foil actuator welding as a competing technology to magnetic pulse welding , 2016 .

[46]  M. Vieira,et al.  Cold rolled versus sputtered Ni/Ti multilayers for reaction-assisted diffusion bonding , 2016, Welding in the World.

[47]  P. Sathiya,et al.  A Review of Similar and Dissimilar Micro-joining of Nitinol , 2016 .

[48]  Wenya Li,et al.  Linear and rotary friction welding review , 2016 .

[49]  N. Schell,et al.  High strain and long duration cycling behavior of laser welded NiTi sheets , 2016 .

[50]  Z. Zeng,et al.  Laser welded superelastic Cu–Al–Mn shape memory alloy wires , 2016 .

[51]  Abhay Sharma,et al.  Magnetic pulse welding: An efficient and environmentally friendly multi-material joining technique , 2015 .

[52]  G. Proust,et al.  Interfacial study of NiTi–Ti3SiC2 solid state diffusion bonded joints , 2015 .

[53]  S. Belyaev,et al.  Functional properties of ‘Ti50Ni50–Ti49.3Ni50.7’ shape memory composite produced by explosion welding , 2014 .

[54]  Martin Leary,et al.  A review of shape memory alloy research, applications and opportunities , 2014 .

[55]  K. Senkevich.  A Study of the Microstructure of Diffusion Joints of TiNi-Base Alloys , 2014, Metal Science and Heat Treatment.

[56]  A. Cavaleiro,et al.  In Situ Characterization of NiTi/Ti6Al4V Joints During Reaction-Assisted Diffusion Bonding Using Ni/Ti Multilayers , 2014, Journal of Materials Engineering and Performance.

[57]  Anupam Vivek,et al.  Vaporizing foil actuator: A tool for collision welding , 2013 .

[58]  L. Cui,et al.  Transformation behavior of explosively welded TiNi/TiNi laminate after diffusion annealing and aging , 2013 .

[59]  K. Senkevich,et al.  Special Features of Formation of a TiNi – VT6 Diffusion Joint , 2013, Metal Science and Heat Treatment.

[60]  E. Choi,et al.  Lateral reinforcement of welded SMA rings for reinforced concrete columns , 2013 .

[61]  M. Vieira,et al.  Reaction zone formed during diffusion bonding of TiNi to Ti6Al4V using Ni/Ti nanolayers , 2013, Journal of Materials Science.

[62]  K. Senkevich,et al.  Investigation of the process of diffusion bonding of alloys based on titanium nickelide , 2012 .

[63]  Wei Sun,et al.  An Alternative Thin-Plate Welding Technology Using Underwater Shock Wave , 2012 .

[64]  M. Elahinia,et al.  Manufacturing and processing of NiTi implants: A review , 2012 .

[65]  I. Karaman,et al.  Phase and morphology evolution in high-temperature Ti3SiC2–NiTi diffusion-bonded joints , 2011 .

[66]  Glenn S. Daehn,et al.  Application of high velocity impact welding at varied different length scales , 2011 .

[67]  S. Belyaev,et al.  Effect of annealing on martensitic transformations in “steel – TiNi alloy” explosion welded bimetallic composite , 2011 .

[68]  M. Uday,et al.  Advances in friction welding process: A review , 2010 .

[69]  S. Belyaev,et al.  Martensitic transformation and physical properties of ‘steel–TiNi’ bimetal composite, produced by explosion welding , 2010 .

[70]  Atushi Yamamoto,et al.  Friction welding of TiNi alloy to stainless steel using Ni interlayer , 2010 .

[71]  L. Cui,et al.  Influence of aging on damping behavior of TiNi/TiNi alloys synthesized by explosive welding , 2009 .

[72]  Sedat Kolukisa,et al.  Transient liquid phase (tlp) diffusion bonding of Ti45Ni49Cu6 P/M components using Cu interlayer , 2009 .

[73]  C. Crăciunescu,et al.  Shape Memory Assemblies Using Ultrasonic Welding , 2009 .

[74]  Z. Yanjun,et al.  Effects of plate thickness on reverse martensitic transformation of prestrained NiTi/NiTi alloy , 2007 .

[75]  L. Juntao,et al.  Transformation characteristics of TiNi/TiNi alloys synthesized by explosive welding , 2007 .

[76]  L. Juntao,et al.  Effects of severe plastic deformation and heat treatment on transformation behavior of explosively welded duplex TiNi−TiNi , 2007 .

[77]  M. Maalekian,et al.  Friction welding – critical assessment of literature , 2007 .

[78]  Eric T. F. Chau,et al.  Comparative study of joining methods for a SMART aerospace application , 2007 .

[79]  L. Cui,et al.  Microstructure and Martensitic Transformation Behaviors of Explosively Welded NiTi/NiTi Laminates , 2007 .

[80]  Rajiv S. Mishra,et al.  Friction Stir Welding and Processing , 2007 .

[81]  L. Cui,et al.  Transformation and Damping Characteristics of NiTi/NiTi Alloys Synthesized by Explosive Welding , 2006 .

[82]  Neil Morgan,et al.  Medical shape memory alloy applications—the market and its products , 2004 .

[83]  L G Machado,et al.  Medical applications of shape memory alloys. , 2003, Brazilian journal of medical and biological research = Revista brasileira de pesquisas medicas e biologicas.

[84]  R. H. Richman,et al.  A metallurgical approach to improved cavitation-erosion resistance , 1997 .

[85]  R. H. Richman,et al.  Cavitation erosion of NiTi explosively welded to steel , 1995 .

[86]  R. H. Richman,et al.  Explosive welding of a near-equiatomic nickel-titanium alloy to low-carbon steel , 1994 .

[87]  Heishichiro Takahashi,et al.  Friction Welding of Shape Memory Alloy , 1991 .

[88]  Annamaria Gisario,et al.  Laser welding of NiTi shape memory alloy: A review , 2018 .

[89]  S. Belyaev,et al.  Reversible strain in bimetallic TiNi-based shape memory composites produced by explosion welding , 2017 .

[90]  Antonio Concilio,et al.  Shape memory alloy engineering : for aerospace, structural and biomedical applications , 2014 .

[91]  S. Belyaev,et al.  Functional properties of bimetal composite of “stainless steel–TiNi alloy” produced by explosion welding , 2010 .

[92]  T. Shinoda,et al.  Microstructural analysis of friction welded joints in TiNi alloy , 1999 .