Progress in machining-induced residual stress and microstructural evolution of inhomogeneous materials and composites

[1]  R. Khajavi,et al.  Thermal degradation kinetics of epoxy resin modified with elastomeric nanoparticles , 2022, Advanced Composites and Hybrid Materials.

[2]  Liu Yongzhi,et al.  Co-simulation technology of mold flow and structure for injection molding reinforced thermoplastic composite (FRT) parts , 2022, Advanced Composites and Hybrid Materials.

[3]  H. Ahmadi,et al.  Modeling of geometric configuration and fiber interactions in short fiber reinforced composites via new modified Eshelby tensors and enhanced mean-field homogenization , 2021, Mechanics of Materials.

[4]  Witold Ogierman,et al.  A new model for time-efficient analysis of nonlinear composites with arbitrary orientation distribution of fibres , 2021 .

[5]  C. Doudard,et al.  Taking residual stresses into account in low-cycle fatigue design using the adjustable localisation operator method , 2021 .

[6]  E. Salvati.  Residual stress as a fracture toughening mechanism: A Phase-Field study on a brittle material , 2021 .

[7]  Xiubing Liang,et al.  Correlation of C/C preform density and microstructure and mechanical properties of C/C-ZrC-based ultra-high-temperature ceramic matrix composites , 2021, Advanced Composites and Hybrid Materials.

[8]  Yunxin Wu,et al.  Experimental Analysis and Prediction Model of Milling-Induced Residual Stress of Aeronautical Aluminum Alloys , 2021, Applied Sciences.

[9]  L. Noels,et al.  Tensile failure model of carbon fibre in unidirectionally reinforced epoxy composites with mean-field homogenisation , 2021 .

[10]  A. Wineman,et al.  A viscoelastic Eshelby inclusion model and analysis of the Cell-in-Gel system , 2021, International journal of engineering science.

[11]  M. Malakooti,et al.  A double inclusion model for liquid metal polymer composites , 2021 .

[12]  A. Rollett,et al.  The AFRL Additive Manufacturing Modeling Challenge: Predicting Micromechanical Fields in AM IN625 Using an FFT-Based Method with Direct Input from a 3D Microstructural Image , 2021, Integrating Materials and Manufacturing Innovation.

[13]  B. Jamtveit,et al.  Analytical solution for residual stress and strain preserved in anisotropic inclusion entrapped in an isotropic host , 2021, Solid Earth.

[14]  Wei Sun,et al.  Modeling of force and temperature in cutting of particle reinforced metal matrix composites considering particle effects , 2021 .

[15]  H. Dai,et al.  A micromechanical model for effective hygro-thermo-elastic properties of fiber reinforced composites with functionally graded interphases , 2021 .

[16]  Sung-Jin Park,et al.  Micromechanical analysis of residual stress around coarse precipitates under cold rolling conditions , 2021 .

[17]  Wentao Yan,et al.  Multi-Scale modelling of structure-property relationship in additively manufactured metallic materials , 2021 .

[18]  Jin Huang,et al.  Reinforce the mechanical toughness, heat resistance, and friction and wear resistance of phenolic resin via constructing self-assembled hybrid particles of graphite oxide and zirconia as nano-fillers , 2021, Advanced Composites and Hybrid Materials.

[19]  H. Altenbach,et al.  Coupled effect of curved surface and interface on stress state of wrinkled thin film coating at the nanoscale , 2021, ZAMM - Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik.

[20]  M. Caro,et al.  Stability and residual stresses of sputtered wurtzite AlScN thin films , 2021, Physical Review Materials.

[21]  G. Rajan,et al.  Dimensional stability of short fibre reinforced flowable dental composites , 2021, Scientific reports.

[22]  A. Khattab,et al.  Modeling and statistical understanding: The effect of carbon nanotube on mechanical properties of recycled polycaprolactone/epoxy composites , 2021 .

[23]  I. Serrano-Muñoz,et al.  Critical role of scan strategies on the development of microstructure, texture, and residual stresses during laser powder bed fusion additive manufacturing , 2021 .

[24]  C. F. Niordson,et al.  Finite element study of cyclic plasticity near a subsurface inclusion under rolling contact and macro-residual stresses , 2021 .

[25]  M. Aramesh,et al.  Machined surface integrity of inconel 718 in high-speed dry milling using SiAlON ceramic tools , 2021, The International Journal of Advanced Manufacturing Technology.

[26]  Anupam Agrawal,et al.  Reprint of: Residual stress inclusion in the incrementally formed geometry using Fractal Geometry Based Incremental Toolpath (FGBIT) , 2021, Journal of Materials Processing Technology.

[27]  Weidong Liu,et al.  Micromechanical investigation of thermal stresses of a finite plane containing multiple elliptical inclusions based on the equivalent inclusion method and distributed dislocation method , 2021 .

[28]  I. Serrano-Muñoz,et al.  On the interplay of microstructure and residual stress in LPBF IN718 , 2020, Journal of Materials Science.

[29]  D. Roy Mahapatra,et al.  Micromechanical effect of pores on elastic properties of polymer matrix composites , 2020, Polymer Composites.

[30]  D. Van Hemelrijck,et al.  A multi-scale analytical methodology for the prediction of mechanical properties of 3D-printed materials with continuous fibres , 2020 .

[31]  Sung-Jin Park,et al.  Influence of Residual Stress around Constituent Particles on Recrystallization and Grain Growth in Al-Mn-Based Alloy during Annealing , 2020, Materials.

[32]  Z. Khan,et al.  A 3D Finite Element Model of Rolling Contact Fatigue for Evolved Material Response and Residual Stress Estimation , 2020, Tribology Letters.

[33]  Jiacheng Zhang,et al.  Effect of h-BN addition on the microstructure characteristics, residual stress and tribological behavior of WC-reinforced Ni-based composite coatings , 2020 .

[34]  Jinling Liu,et al.  Predicting ductility of Mg/SiCp nanocomposite under multiaxial loading conditions based on unit cell modeling , 2020 .

[35]  K. Balani,et al.  Effect of B4C reinforcement on microstructure, residual stress, toughening and scratch resistance of (Hf, Zr)B2 ceramics , 2020 .

[36]  G. Hai,et al.  Molecular dynamics simulations of the effects of annealing on the micro residual stress induced by vacancy defects in aluminum crystal , 2020, Journal of Crystal Growth.

[37]  K. Nikbin,et al.  Reactive Additive Manufacturing Simulation of Thermoset Nano Graphene Inclusion , 2020 .

[38]  A. Aversa,et al.  Effect of Heat Treatments on Residual Stress and Properties of AISI 316L Steel Processed by Directed Energy Deposition , 2020, Journal of Materials Engineering and Performance.

[39]  A. Fatemi,et al.  Defects in additive manufactured metals and their effect on fatigue performance: A state-of-the-art review , 2020 .

[40]  Q. To,et al.  Coupled molecular dynamics and micromechanics study of planar elastic properties of graphene with void defects , 2020 .

[41]  Yan Li,et al.  Layered structures with rough surfaces and interfaces at contact loading , 2020 .

[42]  J. Woody Ju,et al.  Interface energy effect on effective elastic moduli of spheroidal particle-reinforced nanocomposites , 2020 .

[43]  Zheng-ming Huang,et al.  Micromechanical prediction of elastic-plastic behavior of a short fiber or particle reinforced composite , 2020 .

[44]  P. Yavari,et al.  Material Allowable Generation and AM Process Parameters Effect on Porosity , 2020, Coatings.

[45]  Xin He,et al.  Block cracking in surface coatings of polymeric substrates , 2020 .

[46]  Alexander M. Korsunsky,et al.  The use of eigenstrain theory and fuzzy techniques for intelligent modeling of residual stress and creep relaxation in welded superalloys , 2020 .

[47]  I. Sevostianov,et al.  Evaluation of the residual stresses in metallic materials produced by additive manufacturing technology: effect of microstructure , 2020, Current Opinion in Chemical Engineering.

[48]  M. Liewald,et al.  Interface reactions occurring in metal-ceramic interpenetrating phase composites manufactured by using semi-solid forming technology , 2020, Advanced Composites and Hybrid Materials.

[49]  Ziya Esen,et al.  Effect of CNT impregnation on the mechanical and thermal properties of C/C-SiC composites , 2020, Advanced Composites and Hybrid Materials.

[50]  C. F. Niordson,et al.  Effect of superimposed compressive stresses on rolling contact fatigue initiation at hard and soft inclusions , 2020 .

[51]  B. Blinn,et al.  High cycle fatigue behavior of high-Mn TWIP steel with different surface morphologies , 2020 .

[52]  H. Dai,et al.  Estimation of dynamic thermo viscoelastic moduli of short fiber‐reinforced polymers based on a micromechanical model considering interphases/interfaces conditions , 2020 .

[53]  Chenglin Wu,et al.  A computationally efficient approach for predicting toughness enhancement in ceramic composites with tailored inclusion arrangements , 2020, International Journal of Fracture.

[54]  Hangil You,et al.  Prediction of Viscoelastic Behavior of Particulate Composites by a Time-Domain Homogenization Approach , 2020, AIAA Scitech 2021 Forum.

[55]  M. Wróbel,et al.  Topography and residual stress analysis for Cu/Au/Co multilayered system , 2019 .

[56]  M. Taya,et al.  Average Eshelby tensor and elastic field for helical inclusion problems , 2019 .

[57]  Yanju Liu,et al.  Thermo-mechanical behavior prediction of particulate reinforced shape memory polymer composite , 2019 .

[58]  Zhanqiang Liu,et al.  Residual Stress Regenerated on Low Plasticity Burnished Inconel 718 Surface After Initial Turning Process , 2019, Journal of Manufacturing Science and Engineering.

[59]  E. Ewais,et al.  Inspection of thermal stress parameters of high temperature ceramics and energy absorber materials , 2019 .

[60]  Changjun Zhou,et al.  Fracture performance and numerical simulation of basalt fiber concrete using three-point bending test on notched beam , 2019, Construction and Building Materials.

[61]  Q. Fei,et al.  Computational evaluation of the effects of void on the transverse tensile strengths of unidirectional composites considering thermal residual stress , 2019, Composite Structures.

[62]  Lesley D. Frame,et al.  Impacts of Machining and Heat Treating Practices on Residual Stresses in Alpha-Beta Titanium Alloys , 2019, Journal of Materials Engineering and Performance.

[63]  Shanshan Zhang,et al.  Finite element analysis of the effect of TiC or graphite modified composite fillers on the thermal residual stress of AMB ceramic substrates , 2019, Ceramics International.

[64]  F. Sadeghi,et al.  A coupled damage model and a semi-analytical contact solver to simulate butterfly wing formation around nonmetallic inclusions , 2019, International Journal of Fatigue.

[65]  J. Vlassak,et al.  Residual stress–driven test technique for freestanding ultrathin films: Elastic behavior and residual strain , 2019, Journal of Materials Research.

[66]  M. Shamanian,et al.  Hot rolling of MWCNTs reinforced Al matrix composites produced via spark plasma sintering , 2019, Advanced Composites and Hybrid Materials.

[67]  W. Węglewski,et al.  Anomalous size effect in thermal residual stresses in pressure sintered alumina-chromium composites , 2019, Materials Science and Engineering: A.

[68]  M. Enright,et al.  Application of critical distances to fatigue at pores , 2019, Fatigue & Fracture of Engineering Materials & Structures.

[69]  N. Baddour,et al.  Failure and life evaluation of EB-PVD thermal barrier coatings using temperature-process-dependent model parameters , 2019, Corrosion Science.

[70]  M. François,et al.  Determination of single-crystal elasticity constants of the beta phase in a multiphase tungsten thin film using impulse excitation technique, X-ray diffraction and micro-mechanical modeling , 2019, Acta Materialia.

[71]  Arnold C. Vermeulen,et al.  Implementation of the self-consistent Kröner–Eshelby model for the calculation of X-ray elastic constants for any crystal symmetry , 2019, Powder Diffraction.

[72]  P. Sharma,et al.  Liquid inclusions in soft materials: Capillary effect, mechanical stiffening and enhanced electromechanical response , 2019, Journal of the Mechanics and Physics of Solids.

[73]  Yongxiang Li,et al.  Mechanical strength enhancement of low temperature co-fired multilayer ceramic substrates by introducing residual stress , 2019, Ceramics International.

[74]  Jun Zhao,et al.  Experimental investigations on the failure mechanism and self-sharpening of a graded tool , 2019, Machining Science and Technology.

[75]  J. Hattel,et al.  Impact of micro-scale residual stress on in-situ tensile testing of ductile cast iron: Digital volume correlation vs. model with fully resolved microstructure vs. periodic unit cell , 2019, Journal of the Mechanics and Physics of Solids.

[76]  P. Schiavone,et al.  The effect of a nearby circular thermal inclusion on the irregular shape of a coated inhomogeneity with internal uniform hydrostatic thermal stresses , 2019, Journal of Thermal Stresses.

[77]  L. Rabinsky,et al.  Simulation of residual thermal stresses in high-porous fibrous silicon nitride ceramics , 2019, Powder Metallurgy and Metal Ceramics.

[78]  Woong‐Ryeol Yu,et al.  Three-dimensional constitutive model of woven fabric-reinforced shape memory polymer composites considering thermal residual stress , 2019, Smart Materials and Structures.

[79]  S. Münstermann,et al.  Numerical Study of the Effect of Inclusions on the Residual Stress Distribution in High-Strength Martensitic Steels During Cooling , 2019, Applied Sciences.

[80]  I. Sevostianov,et al.  Maxwell scheme for internal stresses in multiphase composites , 2019, Mechanics of Materials.

[81]  Seunghwa Ryu,et al.  Micromechanics-Based Homogenization of the Effective Physical Properties of Composites With an Anisotropic Matrix and Interfacial Imperfections , 2018, Front. Mater..

[82]  D. Sciti,et al.  Impact of residual stress on thermal damage accumulation, and Young's modulus of fiber-reinforced ultra-high temperature ceramics , 2018, Materials & Design.

[83]  S. Raja,et al.  A new micromechanics approach to the application of Eshelby's equivalent inclusion method in three phase composites with shape memory polymer matrix , 2018, Composites Part B: Engineering.

[84]  C. Przybyla,et al.  Residual stress determination of silicon containing boron dopants in ceramic matrix composites , 2018, Journal of the American Ceramic Society.

[85]  Zhihong Du,et al.  Damage and fracture model for eutectic composite ceramics , 2018, Acta Mechanica Sinica.

[86]  Zhihong Du,et al.  Strength model for composite ceramics with nano-interface and micro-interface , 2018, Composite Interfaces.

[87]  D. Lee,et al.  Modeling the effects of elastic modulus and thermal expansion coefficient on the shrinkage of glass fiber reinforced composites , 2018, Composites Part B: Engineering.

[88]  R. Ansari,et al.  Effective elastoplastic properties of carbon nanotube-reinforced aluminum nanocomposites considering the residual stresses , 2018 .

[89]  C. Przybyla,et al.  Residual stress measurements in melt infiltrated SiC/SiC ceramic matrix composites using Raman spectroscopy , 2018, Journal of the European Ceramic Society.

[90]  R. Shneck,et al.  Heat treatment effect on the mechanical properties and fracture mechanism in AlSi10Mg fabricated by additive manufacturing selective laser melting process , 2018, Materials Science and Engineering: A.

[91]  S. Yasui,et al.  Investigation of residual stress in lead-free BNT-based ceramic/ceramic composites , 2018 .

[92]  Alexander M. Korsunsky,et al.  A simplified FEM eigenstrain residual stress reconstruction for surface treatments in arbitrary 3D geometries , 2018 .

[93]  T. Trzepieciński,et al.  3D microstructure-based modelling of the deformation behaviour of ceramic matrix composites , 2017, Journal of the European Ceramic Society.

[94]  A. Kromm,et al.  Effect of hatch length on the development of microstructure, texture and residual stresses in selective laser melted superalloy Inconel 718 , 2017 .

[95]  J. Mostaghimi,et al.  Modeling Residual Stress Development in Thermal Spray Coatings: Current Status and Way Forward , 2017, Journal of Thermal Spray Technology.

[96]  T. Hyde,et al.  Effects of three-dimensional coating interfaces on thermo-mechanical stresses within plasma spray thermal barrier coatings , 2017 .

[97]  Alexander M. Korsunsky,et al.  submitter : Eigenstrain reconstruction of residual strains in an additively manufactured and shot peened nickel superalloy compressor blade , 2017 .

[98]  Katia Artzt,et al.  An Assessment of Subsurface Residual Stress Analysis in SLM Ti-6Al-4V , 2017, Materials.

[99]  R. Gadow,et al.  Finite Element Simulation of Residual Stress Development in Thermally Sprayed Coatings , 2017, Journal of Thermal Spray Technology.

[100]  Arash Yavari,et al.  On the Stress Field of a Nonlinear Elastic Solid Torus with a Toroidal Inclusion , 2017 .

[101]  J. Hattel,et al.  Three-dimensional local residual stress and orientation gradients near graphite nodules in ductile cast iron , 2016 .

[102]  P. Sharma,et al.  Eshelby's tensor for embedded inclusions and the Elasto-Capillary phenomenon , 2016 .

[103]  Xiaoming Zhang,et al.  A novel relaxation-free analytical method for prediction of residual stress induced by mechanical load during orthogonal machining , 2016 .

[104]  Atul K. Jain,et al.  Effective anisotropic stiffness of inclusions with debonded interface for Eshelby-based models , 2015 .

[105]  A. Rollett,et al.  Simulation of residual stress and elastic energy density in thermal barrier coatings using fast Fourier transforms , 2015 .

[106]  A. Korsunsky,et al.  The principle of equivalent eigenstrain for inhomogeneous inclusion problems , 2014 .

[107]  R. Angel,et al.  Letter. Geobarometry from host-inclusion systems: The role of elastic relaxation , 2014 .

[108]  Y. Akiniwa,et al.  Residual Stress Evaluation of Short-Fiber Reinforced Plastics by X-Ray Diffraction , 2014 .

[109]  H. Coules,et al.  A method for reconstruction of residual stress fields from measurements made in an incompatible region , 2014 .

[110]  Alain Goriely,et al.  Nonlinear Elastic Inclusions in Anisotropic Solids , 2013, Journal of Elasticity.

[111]  A. A. Zadpoor,et al.  Mechanical properties of open-cell metallic biomaterials manufactured using additive manufacturing , 2013 .

[112]  Jonathan P. Wright,et al.  Residual stress relief due to fatigue in tetragonal lead zirconate titanate ceramics , 2013 .

[113]  Leon M Keer,et al.  A review of recent works on inclusions , 2013 .

[114]  P. Scardi,et al.  Stress gradients and grain interaction determination in electrodeposited coatings by synchrotron radiation , 2013 .

[115]  Alain Goriely,et al.  Weyl geometry and the nonlinear mechanics of distributed point defects , 2012, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[116]  R. Chaudhuri.  Three-dimensional singular stress/residual stress fields at crack/anticrack fronts in monoclinic plates under antiplane shear loading , 2012 .

[117]  Juanjuan Zhang,et al.  The effective properties of three-dimensional giant magnetostrictive composites , 2011 .

[118]  Biao Wang,et al.  Theoretical analysis of electric, magnetic and magnetoelectric properties of nano-structured multiferroic composites , 2011 .

[119]  D. G. McCartney,et al.  Mechanical Properties and Microstructure of VPS and HVOF CoNiCrAlY Coatings , 2011 .

[120]  T. Jun,et al.  Inverse Eigenstrain Analysis of the Effect of Non-uniform Sample Shape on the Residual Stress Due to Shot Peening , 2011 .

[121]  I. Ashcroft,et al.  Thermal residual stress analysis of epoxy bi-material laminates and bonded joints , 2010 .

[122]  R. Goldstein,et al.  Effect of residual surface stress and surface elasticity on deformation of nanometer spherical inclusions in an elastic matrix , 2010 .

[123]  H. Fan,et al.  Effective modulus of heterogeneous materials in thin film configurations , 2010 .

[124]  R. Chaudhuri.  On three-dimensional singular stress/residual stress fields at the front of a crack/anticrack in an orthotropic/orthorhombic plate under anti-plane shear loading , 2010 .

[125]  Nuri Ersoy,et al.  Development of the properties of a carbon fibre reinforced thermosetting composite through cure , 2010 .

[126]  P. Scardi,et al.  Analysis of Residual Stress-Texture Relationships in Thin Films , 2010 .

[127]  Biao Wang,et al.  Thickness effect of a thin film on the stress field due to the eigenstrain of an ellipsoidal inclusion , 2009 .

[128]  P. Withers,et al.  Residual stress and its role in failure , 2007 .

[129]  H. Shodja,et al.  Inclusion problems associated with thin fcc films: Linkage between eigenstrain and inter-atomic potential , 2007 .

[130]  G. Bruno,et al.  The dependence of the Eshelby model predictions on the microstructure of metal matrix composites , 2007 .

[131]  E. Bourhis,et al.  Elastic properties of polycrystalline gold thin films: Simulation and X-ray diffraction experiments , 2006 .

[132]  G. Bruno,et al.  Gauge volume effects in residual stress determination by neutron diffraction: The strength differential effect in metal matrix composites , 2006 .

[133]  Andrew C. Long,et al.  A micromechanical study of residual stress and its effect on transverse failure in polymer–matrix composites , 2006 .

[134]  Maciej Kumosa,et al.  Residual stress analysis in aged graphite/PMR-15 composites using X-ray diffraction , 2006 .

[135]  Jae Kon Lee,et al.  A theoretical comparison of two possible shape memory processes in shape memory alloy reinforced metal matrix composite , 2005 .

[136]  I. C. Noyan,et al.  Spatially transient stress effects in thin films by X-ray diffraction , 2005, Powder Diffraction.

[137]  A. Krawitz,et al.  Effects of WC size and amount on the thermal residual stress in WC–Ni composites , 2005 .

[138]  A. Steuwer,et al.  Micromechanics of residual stress and texture development due to poling in polycrystalline ferroelectric ceramics , 2005 .

[139]  G. Bruno,et al.  Correlation between residual stresses and the strength differential effect in PM 6061Al–15 vol% SiCw composites: experiments, models and predictions , 2004 .

[140]  M. Taya,et al.  Strengthening mechanism of shape memory alloy reinforced metal matrix composite , 2004 .

[141]  Toivo Lepistö,et al.  Relation between residual stress and Barkhausen noise in a duplex steel , 2003 .

[142]  G. Bruno,et al.  Residual stress analysis in aerospace MMC materials by neutron diffraction , 2002 .

[143]  A. Machová.  Residual stress in Fe–Cu alloys at 0 and 600 K , 2002 .

[144]  W. Johnson,et al.  Processing, microstructure and properties of ductile metal particulate reinforced Zr57Nb5Al10Cu15.4Ni12.6 bulk metallic glass composites , 2002 .

[145]  R. Lin Peng,et al.  Grain-orientation-dependent residual stress and the effect of annealing in cold-rolled stainless steel , 2002 .

[146]  M. Santare,et al.  Thermal Residual Stress and Interphase Effects on Crack-Inclusion Interactions , 2002 .

[147]  M. Kumosa,et al.  An analysis of residual thermal stresses in a unidirectional graphite/PMR-15 composite based on X-ray diffraction measurements , 2001 .

[148]  Y. Hirose,et al.  Residual stress in composite film (Ni Co P/Si3N4) , 2001 .

[149]  Wei Yang,et al.  Composite Eshelby model and domain band geometries of ferroelectric ceramics , 2001 .

[150]  L. Menezes,et al.  Numerical determination of the influence of the cooling rate and reinforcement volume fraction on the levels of residual stresses in Al–SiC composites , 2001 .

[151]  S. Schmauder,et al.  Phase-stress partition and residual stress in metal matrix composites , 2000 .

[152]  G. Hu,et al.  Influence of residual stress on the elastic-plastic deformation of composites with two- or three-dimensional randomly oriented inclusions , 2000 .

[153]  Liu Xue-bin,et al.  A study of residual stress field in whisker reinforced metallic composite by using 3-D FEM , 2000, Wuhan University Journal of Natural Sciences.

[154]  S. Park,et al.  Bound Solution for Residual Stress Due to Thermal Mismatch in Particle Reinforced Composites , 1999 .

[155]  Joong-Keun Park,et al.  Effect of thin film stress on the elastic strain energy of Cr thin film on substrate , 1999 .

[156]  J. Lambropoulos,et al.  Dependence of birefringence and residual stress near laser-induced cracks in fused silica on laser fluence and on laser-pulse number. , 1998, Applied optics.

[157]  D. J. Wissuchek.  Residual stresses due to refractory inclusions in silica glass , 1998, Bragg Gratings, Photosensitivity, and Poling in Glass Fibers and Waveguides: Applications and Fundamentals.

[158]  Huinian Li,et al.  Dependence of thermal residual stress on temperature in a SiC particle-reinforced 6061Al alloy , 1998 .

[159]  L. Froyen,et al.  Determination of interfacial residual stress field in an Al–Al2O3 composite using convergent-beam electron diffraction technique , 1998 .

[160]  Manuel François,et al.  Residual stresses and crystallographic texture in hard-chromium electroplated coatings , 1997 .

[161]  R. Bolmaro,et al.  An Eshelby inclusion based model for the study of stresses and plastic strain localization in metal matrix composites II. Fiber reinforcement and lamellar inclusions , 1997 .

[162]  C. Shih,et al.  Failure of a thin film due to inclusions on the interface , 1997 .

[163]  Chun-Hway Hsueh,et al.  Residual thermal stresses in ceramic composites. Part I: with ellipsoidal inclusions , 1996 .

[164]  I. Sheng,et al.  Thermal Phase Transformation and Residual Stress Estimation of Multi-Layer Materials for Cylindrical or Flat Shape , 1996 .

[165]  R. Stevens,et al.  Micromechanics of randomly oriented ellipsoidal inclusion composites. Part I: Stress, strain and thermal expansion , 1996 .

[166]  W. Benoit,et al.  Residual stress in WC-Co measured by neutron diffraction , 1996 .

[167]  T. Lin,et al.  Elastic Anisotropy Effect of Crystals on Polycrystal Fatigue Crack Initiation , 1995 .

[168]  N. Chandra,et al.  Application of GPS Tensors to Fiber Reinforced Composites , 1995 .

[169]  J. Lu,et al.  Influence of cold rolling and fatigue on the residual stress state of a metal matrix composite , 1993 .

[170]  Minoru Taya,et al.  Strengthening mechanisms of TiNi shape memory fiber/Al matrix composite , 1993, Smart Structures.

[171]  T. Clyne,et al.  The quenching stress in thermally sprayed coatings , 1991 .

[172]  M. Taya,et al.  Thermal Residual Stress in a Two-Dimensional In-Plane Misoriented Short Fiber Composite , 1990 .

[173]  Philip J. Withers,et al.  The application of the eshelby method of internal stress determination to short fibre metal matrix composites , 1989 .

[174]  M. Taya,et al.  Toughening of a particulate-reinforced/ceramic-matrix composite. Technical report , 1989 .

[175]  A. Perry,et al.  Residual stress and X-ray elastic constants in highly textured physically vapor deposited coatings , 1988 .

[176]  G. Weng,et al.  On Eshelby's inclusion problem in a three-phase spherically concentric solid, and a modification of Mori-Tanaka's method , 1987 .

[177]  J. Cohen,et al.  Residual Stress: Measurement by Diffraction and Interpretation , 1987 .

[178]  M. Taya,et al.  Thermal residual stress in metal matrix composite , 1987 .

[179]  M. Taya,et al.  Thermal Stress in a Coated Short Fibre Composite , 1986 .

[180]  A. Evans,et al.  On the mechanical behavior of brittle coatings and layers , 1983 .

[181]  Toshio Mura,et al.  The Elastic Field Outside an Ellipsoidal Inclusion , 1977 .

[182]  J. D. Eshelby.  The determination of the elastic field of an ellipsoidal inclusion, and related problems , 1957, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[183]  S. Ahzi,et al.  New insights into the synergistic influence of voids and interphase characteristics on effective properties of unidirectional composites , 2021 .

[184]  M. Shokrieh,et al.  Nondestructive testing (NDT) techniques in the measurement of residual stresses in composite materials: An overview , 2021, Residual Stresses in Composite Materials.

[185]  Zhaolian Jiang,et al.  Residual stress and fracture toughness of sintered body of ZrO2-GO composite ceramics material , 2021 .

[186]  M. Shokrieh,et al.  Understanding residual stresses in polymer matrix composites , 2021, Residual Stresses in Composite Materials.

[187]  J. Cormier,et al.  Machining influence on the fatigue resistance of Inconel 718 fabricated by Selective Laser Melting (SLM) , 2019, Procedia Structural Integrity.

[188]  Himanshu Pathak,et al.  Multi-scale fracture analysis of fibre-reinforced composites , 2019, Materials Today: Proceedings.

[189]  C. F. Niordson,et al.  Determination of optimal residual stress profiles for improved rolling contact fatigue resistance , 2019, MATEC Web of Conferences.

[190]  P. Schiavone,et al.  A circular Eshelby inclusion interacting with a coated non-elliptical inhomogeneity with internal uniform stresses in anti-plane shear , 2019, Mechanics of Materials.

[191]  G. Requena,et al.  New aspects about the search for the most relevant parameters optimizing SLM materials , 2019, Additive Manufacturing.

[192]  Youngsik Choi.  Effects of Cutting Speed on Surface Integrity and Fatigue Performance of Hard Machined Surfaces , 2019, International Journal of Precision Engineering and Manufacturing.

[193]  E. Ossola,et al.  Microinclusion and Fatigue Performance of Bearing Rolling Elements , 2019, Structural Integrity.

[194]  Han Ding,et al.  Analytical Model for Prediction of Residual Stress in Dynamic Orthogonal Cutting Process , 2018 .

[195]  Xiaoming Zhang,et al.  An Enhanced Analytical Model of Residual Stress for Peripheral Milling , 2017 .

[196]  W. A. Theiner,et al.  Structural and Residual Stress Analysis by Nondestructive Methods , 2014 .

[197]  J. W. Ju,et al.  Elastoplastic Micromechanical Damage Mechanics for Composites With Progressive Partial Fiber Debonding and Thermal Residual Stress , 2007 .

[198]  Hossein M. Shodja,et al.  Elastic Fields in Double Inhomogeneity by the Equivalent Inclusion Method , 2001 .

[199]  Zihui Xia,et al.  Aspects of residual thermal stress/strain in particle reinforced metal matrix composites , 2000 .

[200]  G. Fry,et al.  Residual Stress Effects in Railroad Rail Fatigue , 1999 .

[201]  J. Luo,et al.  The role of residual stress on the mechanical properties of Al2O3-5 vol% SiC nano-composites , 1997 .

[202]  T. Ericsson,et al.  Effect of pressure rolling on the residual stress state of a particulate-reinforced metal matrix composite , 1995 .

[203]  D. J. Green,et al.  Residual stress-induced spontaneous microcracking in α-SiC platelet Al2O3 composites , 1994, Journal of Materials Science.

[204]  J. Luo,et al.  Residual stress and microcracking in SiC-MgO composites , 1993 .

[205]  C. Persson,et al.  Measurements and Prediction of Residual Stress in Metal Matrix Composites , 1992 .

[206]  M. Taya,et al.  RESIDUAL STRESSES IN AND AROUND A SHORT FIBER IN METAL MATRIX COMPOSITES DUE TO TEMPERATURE CHANGE. , 1985 .

[207]  Toshio Mura,et al.  Micromechanics of defects in solids , 1982 .