Influence of inclusion content on rolling contact fatigue in a gear steel: Experimental analysis and predictive modelling

Abstract Rolling contact fatigue tests were carried out on ring specimens made of quenched and tempered SAE 5135 gear steel with three different steel-production processes, through a bi-disc machine under pure rolling condition and water lubrication. Early formation of micro-pits then coalescing into macro-pits was observed on the rolling surface, while the final failure was caused by subsurface originated spalling phenomena. Microscope analysis of specimens section highlighted the complex surface and subsurface crack layout, and permitted to recognise sulphides as preferential sites for cracks initiation. The inclusion content was analysed throughout the extreme value statistics and the maximum expected inclusion in the Hertzian contact zone was introduced in a failure assessment diagram recently proposed, which resulted effective in predicting the specimen failures.

[1]  M. Kaneta,et al.  Analysis of Surface Crack Propagation in Lubricated Rolling Contact , 1985 .

[2]  Ap Voskamp,et al.  Fatigue and Material Response in Rolling Contact , 1998 .

[3]  Herbert S. Cheng,et al.  Semi-Analytical Modeling of Crack Initiation Dominant Contact Fatigue Life for Roller Bearings , 1997 .

[4]  F. Sadeghi,et al.  Explicit finite element modeling of subsurface initiated spalling in rolling contacts , 2010 .

[5]  K. Johnson.  The Strength of Surfaces in Rolling Contact , 1989 .

[6]  Arne Melander.  A finite element study of short cracks with different inclusion types under rolling contact fatigue load , 1997 .

[7]  Luca Susmel,et al.  Material fatigue properties for assessing mechanical components weakened by notches and defects , 2008 .

[8]  Giorgio Donzella,et al.  Surface and Subsurface Cracks in Rolling Contact Fatigue of Hardened Components , 2002 .

[9]  Tim Topper,et al.  Notch fatigue behaviour of SAE1045 steel , 1988 .

[10]  Michael Valenti,et al.  Vacuum Degassing Yields Stronger Steel , 1998 .

[11]  A. Otsuka,et al.  A TEST METHOD FOR MODE II FATIGUE CRACK GROWTH RELATING TO A MODEL FOR ROLLING CONTACT FATIGUE , 1996 .

[12]  J.J.C. Hoo,et al.  Bearing Steels: Into the 21st Century , 1998 .

[13]  Stefano Beretta,et al.  Fatigue crack propagation and threshold for shallow micro-cracks under out-of-phase multiaxial loading in a gear steel , 2010 .

[14]  Stefano Beretta,et al.  STATISTICAL ANALYSIS OF DEFECTS FOR FATIGUE STRENGTH PREDICTION AND QUALITY CONTROL OF MATERIALS , 1998 .

[15]  Luigi Solazzi,et al.  Subcase crack propagation threshold and microhardness profile influence in rolling contact fatigue of carburised components , 2001 .

[16]  Nannaji Saka,et al.  Crack Propagation in Rolling Line Contacts , 1992 .

[17]  M. E. Haddad,et al.  Prediction of non propagating cracks , 1979 .

[18]  Y. Murakami.  Metal Fatigue: Effects of Small Defects and Nonmetallic Inclusions , 2002 .

[19]  R. Fougères,et al.  Role of inclusions, surface roughness and operating conditions on rolling contact fatigue , 1999 .

[20]  S. L. Rice,et al.  Case Crushing of Carburized and Hardened Gears , 1961 .

[21]  D. Hetzner,et al.  Developing ASTM E 2283: Standard Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features , 2006 .

[22]  C. Petrogalli,et al.  A failure assessment diagram for components subjected to rolling contact loading , 2010 .