A novel method for geometric quality assurance of rock joint replicas in direct shear testing – Part 1: Derivation of quality assurance parameters and geometric reproducibility

[1]  J. Larsson,et al.  A novel method for geometric quality assurance of rock joint replicas in direct shear testing – Part 2: Validation and mechanical replicability , 2023, Journal of Rock Mechanics and Geotechnical Engineering.

[2]  S. Du,et al.  Method for visualizing the shear process of rock joints using 3D laser scanning and 3D printing techniques , 2022, Journal of Rock Mechanics and Geotechnical Engineering.

[3]  F. Johansson,et al.  Prediction of Peak Shear Strength of Natural, Unfilled Rock Joints Accounting for Matedness Based on Measured Aperture , 2021, Rock Mechanics and Rock Engineering.

[4]  F. Johansson,et al.  Geometrical Quality Assurance of Rock Joint Replicas in Shear Tests – Introductory Analysis , 2020 .

[5]  S. Du,et al.  Experimental Technology for the Shear Strength of the Series-Scale Rock Joint Model , 2020, Rock Mechanics and Rock Engineering.

[6]  Yujing Jiang,et al.  Experimental and Numerical Investigation on Shear Failure Behavior of Rock-like Samples Containing Multiple Non-Persistent Joints , 2020, Rock Mechanics and Rock Engineering.

[7]  P. Yan,et al.  Experimental Investigation on the Shear Properties of Heterogeneous Discontinuities , 2019, Geotechnical and Geological Engineering.

[8]  Qi Zhao,et al.  2D and 3D Roughness Characterization , 2019, Rock Mechanics and Rock Engineering.

[9]  A. Basu,et al.  Shear Behavior of Unfilled-Planar Quartzitic Rock Joints with Reference to Weathering Grade of Joint Surfaces , 2019, Rock Mechanics and Rock Engineering.

[10]  J. B. Zhu,et al.  A One-Dimensional Elastoplastic Model for Capturing the Nonlinear Shear Behaviour of Joints with Triangular Asperities Based on Direct Shear Tests , 2018, Rock Mechanics and Rock Engineering.

[11]  Songbo Yu,et al.  Shear Behavior of Rock Joints Under CNS Boundary Condition , 2018 .

[12]  Quansheng Liu,et al.  Experimental Investigation of the Peak Shear Strength Criterion Based on Three-Dimensional Surface Description , 2018, Rock Mechanics and Rock Engineering.

[13]  M. Moosavi,et al.  Shear Strength and Cracking Process of Non-persistent Jointed Rocks: An Extensive Experimental Investigation , 2018, Rock Mechanics and Rock Engineering.

[14]  M. Bahaaddini.  Effect of Boundary Condition on the Shear Behaviour of Rock Joints in the Direct Shear Test , 2017, Rock Mechanics and Rock Engineering.

[15]  Rakesh Kumar,et al.  Anisotropic shear behavior of rock joint replicas , 2016 .

[16]  H. Singh,et al.  Shear behaviors of ‘real’ natural un-matching joints of granite with equivalent joint roughness coefficients , 2016 .

[17]  A. Sagy,et al.  Geometrical evolution of interlocked rough slip surfaces: The role of normal stress , 2016 .

[18]  Qinghui Jiang,et al.  Laboratory Investigation on Shear Behavior of Rock Joints and a New Peak Shear Strength Criterion , 2016, Rock Mechanics and Rock Engineering.

[19]  Xia-Ting Feng,et al.  Reverse modelling of natural rock joints using 3D scanning and 3D printing , 2016 .

[20]  Yan Xing,et al.  Laboratory Estimation of Rock Joint Stiffness and Frictional Parameters , 2016, Geotechnical and Geological Engineering.

[21]  Syd S. Peng,et al.  Determination of coal–rock interface strength by laboratory direct shear tests under constant normal load , 2015 .

[22]  A. Shrivastava,et al.  Shear Behaviour of Rock Joints Under CNL and CNS Boundary Conditions , 2015, Geotechnical and Geological Engineering.

[23]  Buddhima Indraratna,et al.  A technique for three-dimensional characterisation of asperity deformation on the surface of sheared rock joints , 2014 .

[24]  Jung-Wook Park,et al.  Model for the shear behavior of rock joints under CNL and CNS conditions , 2014 .

[25]  Ismail Dinçer,et al.  The effects of discontinuity surface roughness on the shear strength of weathered granite joints , 2014, Bulletin of Engineering Geology and the Environment.

[26]  A. Sagy,et al.  Evolution of slip surface roughness through shear , 2014 .

[27]  Giovanni Grasselli,et al.  An Investigation of Discontinuity Roughness Scale Dependency Using High-Resolution Surface Measurements , 2013, Rock Mechanics and Rock Engineering.

[28]  J. Sulem,et al.  Morphological and mechanical analysis of natural marble joints submitted to shear tests , 2012 .

[29]  A. Ghazvinian,et al.  Importance of Tensile Strength on the Shear Behavior of Discontinuities , 2012, Rock Mechanics and Rock Engineering.

[30]  G. Grasselli,et al.  A new 2D discontinuity roughness parameter and its correlation with JRC , 2010 .

[31]  Hyuck-Jin Park,et al.  Influence of weathering on shear strength of joints in a porphyritic granite rock mass in Jechon area, South Korea , 2010 .

[32]  Giovanni Grasselli,et al.  A method to evaluate the three-dimensional roughness of fracture surfaces in brittle geomaterials. , 2009, The Review of scientific instruments.

[33]  Yujing Jiang,et al.  Coupled shear-flow tests for rock fractures with visualization of the fluid flow and their numerical simulations , 2008 .

[34]  Giovanni Grasselli,et al.  Quantitative three-dimensional description of a rough surface and parameter evolution with shearing , 2002 .

[35]  Erling Nordlund,et al.  An experimental study on the anisotropy and stress-dependency of the strength and deformability of rock joints , 1992 .

[36]  Nick Barton,et al.  Experimental studies of scale effects on the shear behaviour of rock joints , 1981 .

[37]  S. M. El-Soudani,et al.  Profilometric analysis of fractures , 1978 .

[38]  N. O. Myers,et al.  Characterization of surface roughness , 1962 .

[39]  Mikael Rinne,et al.  A method to downscale joint surface roughness and to create replica series using 3D printed molds , 2017 .

[40]  Anna Giacomini,et al.  A New Stochastic Approach to Predict Peak and Residual Shear Strength of Natural Rock Discontinuities , 2017, Rock Mechanics and Rock Engineering.

[41]  K. Rao,et al.  Physical Modeling of Shear Behavior of Infilled Rock Joints Under CNL and CNS Boundary Conditions , 2017, Rock Mechanics and Rock Engineering.

[42]  A. Basu,et al.  A Comparison Between the Shear Behavior of ‘Real’ Natural Rock Discontinuities and Their Replicas , 2017, Rock Mechanics and Rock Engineering.

[43]  Nick Barton,et al.  Review of a new shear-strength criterion for rock joints , 1973 .