Influence of temperature and humidity on carbon based printed flexible sensors

This paper presents the response of two different types of novel printed sensors towards the change in temperature and humidity. The electrodes of all the sensors were based on carbon materials. Followed by the design and fabrication of the sensors, the responses of the sensors were analyzed for different temperature and humidity conditions in an incubator. These results provide a podium to enhance the alternation of the fabrication procedure of carbon-based printed sensors.

[1]  N. Kotov,et al.  Multifunctional layer-by-layer carbon nanotube–polyelectrolyte thin films for strain and corrosion sensing , 2007 .

[2]  Mao‐xiang Jing,et al.  High performance of carbon nanotubes/silver nanowires-PET hybrid flexible transparent conductive films via facile pressing-transfer technique , 2014, Nanoscale Research Letters.

[3]  S. Mukhopadhyay,et al.  Novel Sensing Approach for LPG Leakage Detection: Part I—Operating Mechanism and Preliminary Results , 2016, IEEE Sensors Journal.

[4]  D. Beebe,et al.  Three-dimensional micro-channel fabrication in polydimethylsiloxane (PDMS) elastomer , 2000, Journal of Microelectromechanical Systems.

[5]  S. Mukhopadhyay,et al.  Tactile Sensing From Laser-Ablated Metallized PET Films , 2017, IEEE Sensors Journal.

[6]  H. Maekawa,et al.  Photolithography for Minimal Fab System , 2013 .

[7]  M G Warner,et al.  3D-printed poly(vinylidene fluoride)/carbon nanotube composites as a tunable, low-cost chemical vapour sensing platform. , 2017, Nanoscale.

[8]  R. Shabannia,et al.  Vertically aligned ZnO nanorods synthesized using chemical bath deposition method on seed-layer ZnO/polyethylene naphthalate (PEN) substrates , 2013 .

[9]  M. Tahsin Guler,et al.  Rapid fabrication of microfluidic PDMS devices from reusable PDMS molds using laser ablation , 2016 .

[10]  Jeehyeon Bae,et al.  A functionalized gold nanoparticles-assisted universal carrier for antisense DNA. , 2010, Chemical communications.

[11]  Zhi Yang,et al.  Flexible gas sensors with assembled carbon nanotube thin films for DMMP vapor detection , 2010 .

[12]  Subhas Chandra Mukhopadhyay,et al.  Novel Planar Interdigital Sensors , 2014 .

[13]  Gyoujin Cho,et al.  Fully Printed and Encapsulated SWCNT-Based Thin Film Transistors via a Combination of R2R Gravure and Inkjet Printing. , 2016, ACS applied materials & interfaces.

[14]  Sanjeev K. Manohar,et al.  Flexible vapour sensors using single walled carbon nanotubes , 2006 .

[15]  Jing Bai,et al.  Carbon dots-decorated multiwalled carbon nanotubes nanocomposites as a high-performance electrochemical sensor for detection of H2O2 in living cells , 2016, Analytical and Bioanalytical Chemistry.

[16]  Daniel Filippini,et al.  PDMS lab-on-a-chip fabrication using 3D printed templates. , 2014, Lab on a chip.

[17]  S. Mukhopadhyay,et al.  Flexible carbon nanotube nanocomposite sensor for multiple physiological parameter monitoring , 2016 .

[18]  Chinthaka P. Gooneratne,et al.  Technique for rapid detection of phthalates in water and beverages , 2013 .

[19]  J. Tour,et al.  Laser-induced porous graphene films from commercial polymers , 2014, Nature Communications.

[20]  Chang-Soo Han,et al.  Hybrid Transparent Electrodes of Silver Nanowires and Carbon Nanotubes by Plasmonic Welding , 2014 .

[21]  Jurgen Kosel,et al.  Novel Sensing Approach for LPG Leakage Detection—Part II: Effects of Particle Size, Composition, and Coating Layer Thickness , 2016, IEEE Sensors Journal.

[22]  Husnu Emrah Unalan,et al.  Zinc oxide nanowire photodetectors with single-walled carbon nanotube thin-film electrodes. , 2012, ACS applied materials & interfaces.

[23]  Ying Li,et al.  Lightweight, Superelastic, and Mechanically Flexible Graphene/Polyimide Nanocomposite Foam for Strain Sensor Application. , 2015, ACS nano.

[24]  Takeuchi Masataka,et al.  ALL-SOLID-STATE LITHIUM ION BATTERY , 2018 .

[25]  Prachya Mruetusatorn,et al.  Control of membrane permeability in air-stable droplet interface bilayers. , 2015, Langmuir : the ACS journal of surfaces and colloids.

[26]  Q. Pei,et al.  An aluminum nanoparticle–acrylate copolymer nanocomposite as a dielectric elastomer with a high dielectric constant , 2014 .

[27]  S. Mukhopadhyay,et al.  A Novel Planar-Type Biosensor for Noninvasive Meat Inspection , 2007, IEEE Sensors Journal.