Effects of loading and sample geometry on acoustic emission generation during fatigue crack growth: Implications for structural health monitoring

Abstract The reliability of traditional non-destructive methods for crack detection is well understood and characterised using Probability of Detection (POD) curves. Structural Health Monitoring (SHM) techniques in contrast remain largely unquantified. The performance of the Acoustic Emission (AE) technique for damage detection and location in potential SHM applications is underpinned by the intensity of AE signal generation from the damage site. In this paper, factors influencing the rates of emission of Acoustic Emission (AE) signals from propagating fatigue cracks were investigated. Fatigue cracks were grown in specimens made from 2014 T6 aluminium sheet while observing the effects of changes in crack length, loading spectrum and sample geometry on rates of acoustic emission. Significant variation was found in the rates of AE signal generation during crack progression from initiation to final failure with a number of distinct phases identified in that progression implying different failure mechanisms operating at particular stages in the failure process. A new ‘probability of hit’ method for quantifying crack detecting capability using AE is also presented.

[1]  Daniel Omatsola Gagar.  Validation and verification of the acoustic emission technique for structural health monitoring , 2013 .

[2]  Daniel Gagar,et al.  A novel closure based approach for fatigue crack length estimation using the acoustic emission technique in structural health monitoring applications , 2014 .

[3]  Luigi Garibaldi,et al.  Measurement of Acoustic Emission Signals: Influence of the Couplant , 2007 .

[4]  Mark F. Horstemeyer,et al.  Quantification of damage evolution in a 7075 aluminum alloy using an acoustic emission technique , 2011 .

[5]  Hongyun Luo,et al.  Acoustic emission during fatigue crack propagation in a micro-alloyed steel and welds , 2011 .

[6]  K. Holford.  Acoustic Emission–Basic Principles and Future Directions , 2000 .

[7]  Isaac M. Daniel,et al.  Acoustic Emission Monitoring of Fatigue Damage in Metals , 1998 .

[8]  C. M. Scala,et al.  Acoustic emission during fatigue crack propagation in the aluminium alloys 2024 and 2124 , 1983 .

[9]  S. Carpenter,et al.  Sources of acoustic emission generated during the plastic deformation of 7075 aluminum alloy , 1977 .

[10]  C. M. Scala,et al.  Acoustic emission during the plastic deformation of aluminium alloys 2024 and 2124 , 1983 .

[11]  Floyd W. Spencer.  Estimating probability of detection curves from regression data , 2001 .

[12]  Dirk P. Kroese,et al.  Kernel density estimation via diffusion , 2010, 1011.2602.

[13]  S. McBride,et al.  Acoustic emission and inclusion fracture in 7075 aluminum alloys , 1981 .

[14]  C. B. Scruby,et al.  Characterisation of fatigue crack extension by quantitative acoustic emission , 1985, International Journal of Fracture.

[15]  Francesco Ciampa,et al.  A new algorithm for acoustic emission localization and flexural group velocity determination in anisotropic structures , 2010 .

[16]  S. Suresh.  Fatigue of materials , 1991 .

[17]  Karen Margaret Holford,et al.  Acoustic Emission in Structural Health Monitoring , 2009 .

[18]  Baldev Raj,et al.  Influence of micro structure on acoustic emission behavior during stage 2 fatigue crack growth in solution annealed, thermally aged and weld specimens of AISI type 316 stainless steel , 1996 .

[19]  Boris A. Zárate,et al.  Prediction of fatigue crack growth in steel bridge components using acoustic emission , 2011 .

[20]  J. Newman.  A crack opening stress equation for fatigue crack growth , 1984 .

[21]  Karen Margaret Holford,et al.  Delta T source location for acoustic emission , 2007 .

[22]  Siegfried Fouvry,et al.  Identification of fretting fatigue crack propagation mechanisms using acoustic emission , 2010 .

[23]  A. Tobias,et al.  Acoustic-emission source location in two dimensions by an array of three sensors , 1976 .

[24]  Kiran Solanki,et al.  Finite element analysis of plasticity-induced fatigue crack closure: an overview , 2004 .