Microfabrication of integrated FMAS using stereo lithography

The flexible microactuator (FMA) is a novel pneumatic rubber actuator developed for use in microrobots. This paper reports on its miniaturization and integration using a stereo lithography method, also known as a photo-forming. First, two key technical issues arising in the application of stereo lithography to FMA fabrication are discussed. One issue is the development of a new FFIA design, which we call a "restraint beam" FMA. This design makes it possible to fabricate FMAs from a single material, allowing lithography to be used. The other issue is related to materials. While conventional materials used in stereo lithography are rigid plastics, new investigations of rubber-like materials are necessary. In this report, we show experimentally that appropriate compound coloring of a resin enables us to control its side-forming and elastic properties. Later in the paper, several examples of fabrication and experiments on prototype FMAs are reported; we discuss the fabrication equipment, the bending motions of "restraint beam" FMAs, the integration of pneumatic circuits, and a 5/spl times/5 FMA array. The 5/spl times/5 array was successfully able to move a glass plate placed on it.

[1]  N. Nakajima,et al.  Photoforming applied to fine machining , 1993, [1993] Proceedings IEEE Micro Electro Mechanical Systems.

[2]  Robert B. McGhee,et al.  Adaptive Locomotion of a Multilegged Robot over Rough Terrain , 1979, IEEE Transactions on Systems, Man, and Cybernetics.

[3]  Koichi Suzumori,et al.  Flexible microactuator for miniature robots , 1991, [1991] Proceedings. IEEE Micro Electro Mechanical Systems.

[4]  Masayoshi Esashi,et al.  Distributed electrostatic micro actuator , 1993, [1993] Proceedings IEEE Micro Electro Mechanical Systems.

[5]  Koichi Suzumori,et al.  Miniature Walking Robots Using Flexible Microactuators , 1991 .

[6]  Koichi Suzumori,et al.  Applying Flexible Microactuators to Pipeline Inspection Robots , 1993, Robotics, Mechatronics and Manufacturing Systems.

[7]  Shoichi Iikura,et al.  Development of flexible microactuator and its applications to robotic mechanisms , 1991, Proceedings. 1991 IEEE International Conference on Robotics and Automation.

[8]  S. Goodwin-Johansson,et al.  Integrated force arrays , 1993, [1993] Proceedings IEEE Micro Electro Mechanical Systems.

[9]  K. Ikuta,et al.  Real three dimensional micro fabrication using stereo lithography and metal molding , 1993, [1993] Proceedings IEEE Micro Electro Mechanical Systems.