Design, fabrication and characterization of a capacitive micromachined ultrasonic probe for medical imaging

In this paper we report the design, fabrication process, and characterization of a 64-elements capacitive micromachined ultrasonic transducer (cMUT), 3 MHz center frequency, 100% fractional bandwidth. Using this transducer, we developed a linear probe for application in medical echographic imaging. The probe was fully characterized and tested with a commercial echographic scanner to obtain first images from phantoms and in vivo human body. The results, which quickly follow similar results obtained by other researchers, clearly show the great potentiality of this new emerging technology. The cMUT probe works better than the standard piezoelectric probe as far as the axial resolution is concerned, but it suffers from low sensitivity. At present this can be a limit, especially for in depth operation. But we are strongly confident that significant improvements can be obtained in the very near future to overcome this limitation, with a better transducer design, the use of an acoustic lens, and using well matched, front-end electronics between the transducer and the echographic system.

[1]  Christofer Hierold,et al.  Surface micromachined ultrasound transducers in CMOS technology , 1996, 1996 IEEE Ultrasonics Symposium. Proceedings.

[2]  Giosue Caliano,et al.  An accurate model for capacitive micromachined ultrasonic transducers , 2002, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[3]  Riccardo Carotenuto,et al.  cMUT echographic probes: design and fabrication process , 2002, 2002 IEEE Ultrasonics Symposium, 2002. Proceedings..

[4]  Riccardo Carotenuto,et al.  Micromachined ultrasonic transducers using silicon nitride membrane fabricated in PECVD technology , 2000, 2000 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No.00CH37121).

[5]  Riccardo Carotenuto,et al.  The effects of membrane metallization in capacitive microfabricated ultrasonic transducers. , 2004, The Journal of the Acoustical Society of America.

[6]  O. Oralkan,et al.  Initial pulse-echo imaging results with one-dimensional capacitive micromachined ultrasonic transducer arrays , 2000, 2000 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No.00CH37121).

[7]  B. Khuri-Yakub,et al.  A surface micromachined electrostatic ultrasonic air transducer , 1996, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[8]  P.-C. Eccardt,et al.  Micromachined transducers for ultrasound applications , 1997, 1997 IEEE Ultrasonics Symposium Proceedings. An International Symposium (Cat. No.97CH36118).

[9]  Vittorio Foglietti,et al.  Improvements towards a reliable fabrication process for cMUT , 2003 .

[10]  H. Grubin.  The physics of semiconductor devices , 1979, IEEE Journal of Quantum Electronics.

[11]  John Mould,et al.  Silicon substrate ringing in microfabricated ultrasonic transducers , 2000, 2000 IEEE Ultrasonics Symposium. Proceedings. An International Symposium (Cat. No.00CH37121).

[12]  I. Ladabaum,et al.  The microfabrication of capacitive ultrasonic transducers , 1997, Proceedings of International Solid State Sensors and Actuators Conference (Transducers '97).

[13]  Fahrettin Levent Degertekin,et al.  Capacitive micromachined ultrasonic transducers for forward looking intravascular imaging arrays , 2002, 2002 IEEE Ultrasonics Symposium, 2002. Proceedings..

[14]  Vittorio Foglietti,et al.  Fabrication of capacitive micromechanical ultrasonic transducers by low-temperature process , 2002 .

[15]  J S Heyman,et al.  Broadband electrostatic acoustic transducer for ultrasonic measurements in liquids. , 1979, The Review of scientific instruments.

[16]  I. Ladabaum,et al.  Theory and analysis of electrode size optimization for capacitive microfabricated ultrasonic transducers , 1999, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.

[17]  D. Mills,et al.  Real-time in-vivo imaging with capacitive micromachined ultrasound transducer (cMUT) linear arrays , 2003, IEEE Symposium on Ultrasonics, 2003.

[18]  Ronald E. McKeighen,et al.  Design guidelines for medical ultrasonic arrays , 1998, Medical Imaging.

[19]  B.T. Khuri-Yakub,et al.  Calculation and measurement of electromechanical coupling coefficient of capacitive micromachined ultrasonic transducers , 2003, IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control.