A stripline X-band oscillator for use in Josephson voltage standards and potentiometers has been designed and constructed. The oscillator, comprising a packaged GaAs MESFET, has been tested at temperatures of 300 K and 4.2 K. The conversion efficiency, the power leveling capability, the frequency tuning, and the phase noise have been investigated. The power level can be varied over a range of 35 dB by tuning the drain-source voltage. A hysteretic behavior in the frequency versus the drain-source voltage characteristic has been observed when the drain-source voltage exceeds a device-dependent level. This effect is attributed to the trapping of hot electrons in the drain region. By varying the gate-source voltage, the frequency can be only tuned over a range of 0.8 MHz at 4.2 K. At a gate-source voltage of 0 V, higher harmonics are generated. A phase noise reduction of 22 dB at a frequency offset of 50 kHz from the carrier can be obtained by cooling to 4.2 K and a feedback network consisting of copper layers.<<ETX>>
[1]
D. Camin,et al.
Observation of reversible collapse phenomena in GaAs MESFETs at cryogenic temperatures
,
1991
.
[2]
P. Gutmann,et al.
X-band GaAs MESFET oscillator for cryogenic application at 4.2 K
,
1991
.
[3]
A. Odawara,et al.
Josephson junction array voltage standard at the ETL
,
1990,
Conference on Precision Electromagnetic Measurements.
[4]
M. Simmonds,et al.
A 24-GHz Josephson array voltage standard
,
1990
.
[5]
H. Q. Tserng,et al.
110 GHz GaAs FET oscillator
,
1985
.
[6]
J. Kohlmann,et al.
Ratio Standard for DC Resistance Using a Second Generation of Josephson Junction Arrays
,
1992
.
[7]
M. Wolny,et al.
Experimental analysis of HEMT behavior under low-temperature conditions
,
1991
.