Some investigations for small‐sized product fabrication with FDM for plastic components

Purpose – Fused deposition modeling (FDM) is an additive manufacturing technology commonly used for modelling, prototyping, and batch production applications. The purpose of this paper is to investigate properties of plastic replicas, fabricated as small‐sized product moulds with FDM.Design/methodology/approach – From the identification of component, prototypes of ABS plastic material were prepared for commercial end‐user applications, such as vacuum moulding, vacuum casting, investment casting, etc.Findings – The study highlighted the best settings of orientation and support material quantity for the selected component on FDM machine, from the dimensional accuracy and economic points of view.Originality/value – Final replicas prepared are acceptable as per DIN 16901 and ISO (UNI EN 20286‐I‐1995) standard for industrial applications. The results are also supported by SEM analysis.

[1]  John E. Renaud,et al.  Characterization of the mesostructure of fused-deposition acrylonitrile-butadiene-styrene materials , 2000 .

[2]  Rupinder Singh,et al.  Three Dimensional Printing for Casting Applications: A State of Art Review and Future Perspectives , 2009 .

[3]  Andrew Y. C. Nee,et al.  Multi‐objective optimization of part‐ building orientation in stereolithography , 1995 .

[4]  A. K. Sood,et al.  Parametric appraisal of mechanical property of fused deposition modelling processed parts , 2010 .

[5]  Munish Chhabra,et al.  Rapid casting solutions: a review , 2011 .

[6]  Rupinder Singh,et al.  Experimental Investigations for Statistically Controlled Rapid Moulding Solution of Plastics Using Polyjet Printing , 2010 .

[7]  N. Venkata Reddy,et al.  Optimum part deposition orientation in fused deposition modeling , 2004 .

[8]  Rupinder Singh,et al.  Comparison of Statistically Controlled Rapid Casting Solutions of Zinc Alloys using Three Dimensional Printing , 2011 .

[9]  N. V. Reddy,et al.  Fused deposition modelling using direct extrusion , 2007 .

[10]  R. Venkata Rao,et al.  Rapid prototyping process selection using graph theory and matrix approach , 2007 .

[11]  N. Venkata Reddy,et al.  Improvement of surface finish by staircase machining in fused deposition modeling , 2003 .

[12]  Han Tong Loh,et al.  Optimal orientation with variable slicing in stereolithography , 1997 .

[13]  A. K. Sood,et al.  Improving dimensional accuracy of Fused Deposition Modelling processed part using grey Taguchi method , 2009 .

[14]  Rupinder Singh,et al.  Investigations for a statistically controlled rapid casting solution of lead alloys using three-dimensional printing , 2009 .

[15]  Aloke Dey,et al.  Experimental results and analysis for Electrical Discharge Machining (EDM) of aluminium metal matrix composites with powder-mixed dielectric: Lenth's method , 2010, Int. J. Manuf. Technol. Manag..

[16]  Rupinder Singh,et al.  Investigations for statistically controlled rapid casting solution of low brass alloys using three dimensional printing , 2009 .

[17]  Chee Kai Chua,et al.  Rapid investment casting: direct and indirect approaches via fused deposition modelling , 2004 .

[18]  S. Arunachalam,et al.  Critical parameters influencing the quality of prototypes in fused deposition modelling , 2001 .

[19]  Guru Nānak,et al.  Investigations for deducing wall thickness of aluminium shell casting using three dimensional printing , 2008 .

[20]  John E. Renaud,et al.  Mechanical behavior of acrylonitrile butadiene styrene (ABS) fused deposition materials. Experimental investigation , 2001 .

[21]  Rupinder Singh.  An overview of three dimensional printing for casting applications , 2011 .

[22]  Djordje Brujic,et al.  CAD-Based Measurement Path Planning for Free-Form Shapes Using Contact Probes , 2000 .

[23]  Dar-Yuan Chang,et al.  Studies on profile error and extruding aperture for the RP parts using the fused deposition modeling process , 2011 .

[24]  Andrea Gatto,et al.  3D Printing technique applied to Rapid Casting , 2007 .