论文信息 - Indium-Tin-Oxide coated optical fibers for temperature-viscosity sensing applications in synthetic lubricant oils

Indium-Tin-Oxide coated optical fibers for temperature-viscosity sensing applications in synthetic lubricant oils

In this work, is presented the fabrication and characterization of optical fiber refractometer based on lossy mode resonances (LMR). Indium-Tin-Oxide (ITO) thin films deposited on optical fibers are used as the LMR supporting coatings. These resonances shift to the red as a function of the external refractive index. The refractometer has been used to characterize temperature variations related to the viscosity of synthetic industrial gear lubricant.

[1] N. Koprinarov,et al. Humidity adsorptive properties of thin fullerene layers studied by means of quartz micro-balance , 1997 .

[2] Y. Sadaoka,et al. Optical-fibre and quartz oscillator type gas sensors: Humidity detection by Nafion® film with crystal violet and related compounds , 1991 .

[3] Eric D. Park,et al. Reliability of fiber optic position sensors , 1991, Other Conferences.

[4] Y. Semenova,et al. Improving the sensitivity of a humidity sensor based on fiber bend coated with a hygroscopic coating , 2011 .

[5] G. Meeten,et al. Refractive index measurement of turbid colloidal fluids by transmission near the critical angle , 1991 .

[6] W. 0. Winer,et al. Correlational Aspects of the Viscosity-Temperature-Pressure Relationship of Lubricating Oils(Dr In dissertation at Technical University of Delft, 1966) , 1966 .

[7] S. Khodier,et al. Refractive index of standard oils as a function of wavelength and temperature , 2002 .

[8] Francisco J. Arregui,et al. Optical fiber refractometers based on Lossy Mode Resonances by means of SnO2 sputtered coatings , 2014 .

[9] Francisco J. Arregui,et al. Generation of surface plasmon resonance and lossy mode resonance by thermal treatment of ITO thin-films , 2015 .