Crack Pattern Formation in Thin Film Lithium-Ion Battery Electrodes

Cracking of electrodes caused by large volume change and the associated lithium diffusion-induced stress during electrochemical cycling is one of the main reasons for the short cycle life of lithium-ion batteries using high capacity anode materials, such as Si and Sn. In this work, we study the fracture behavior and cracking patterns in amorphous Si thin film electrodes as a result of electrochemical cycling. A modified spring-block model is shown to capture the essential features of cracking patterns of electrode materials, including self-similarity. It is shown that cracks are straight in thick films, but show more wiggles in thin films. As the thickness of film decreases, the average size of islands separated by cracks decreases. A critical thickness bellow which material would not crack is found for amorphous Si films. The experimental and simulation results of this work provide guidelines for designing crack free thin-film lithium ion battery electrodes during cycling by patterning the electrode and reducing the film thickness.

[1]  Fuqian Yang.  Criterion for insertion-induced microcracking and debonding of thin films , 2011 .

[2]  M. Verbrugge,et al.  Application of Hasselman’s Crack Propagation Model to Insertion Electrodes , 2010 .

[3]  Venkat Srinivasan,et al.  In situ measurements of stress evolution in silicon thin films during electrochemical lithiation and delithiation , 2010, 1108.0647.

[4]  Yue Qi,et al.  Elastic softening of amorphous and crystalline Li–Si Phases with increasing Li concentration: A first-principles study , 2010 .

[5]  Jing Zhu,et al.  Silicon nanowire array films as advanced anode materials for lithium-ion batteries , 2010 .

[6]  G. Sasaki,et al.  Deformation Behavior of Copper Foil Collectors with Ni3Sn4 Film During the Charge-Discharge of Lithium Ion Secondary Cells on the Basis of an Optical Cantilever Method , 2010 .

[7]  D. Sadana,et al.  Investigation on critical failure thickness of hydrogenated/nonhydrogenated amorphous silicon films , 2010 .

[8]  M. Verbrugge,et al.  Diffusion-Induced Stress, Interfacial Charge Transfer, and Criteria for Avoiding Crack Initiation of Electrode Particles , 2010 .

[9]  S. Tarafdar,et al.  Crack patterns in desiccating clay–polymer mixtures with varying composition , 2010, Journal of physics. Condensed matter : an Institute of Physics journal.

[10]  Mark W. Verbrugge,et al.  Evolution of stress within a spherical insertion electrode particle under potentiostatic and galvanostatic operation , 2009 .

[11]  Qunyang Li,et al.  Micromechanics of friction: effects of nanometre-scale roughness , 2008, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[12]  Laurent Lucas,et al.  A Dynamic Model of Cracks Development Based on a 3D Discrete Shrinkage Volume Propagation , 2008, Comput. Graph. Forum.

[13]  R. Salot,et al.  Study of Germanium as Electrode in Thin-Film Battery , 2008 .

[14]  T. Momma,et al.  Mechanical analysis and in situ structural and morphological evaluation of Ni–Sn alloy anodes for Li ion batteries , 2008 .

[15]  S. Tarafdar,et al.  Desiccation cracks on different substrates: simulation by a spring network model , 2007 .

[16]  J. Dahn,et al.  Isotropic Volume Expansion of Particles of Amorphous Metallic Alloys in Composite Negative Electrodes for Li-Ion Batteries , 2007 .

[17]  J. Dahn,et al.  In Situ AFM Measurements of the Expansion and Contraction of Amorphous Sn-Co-C Films Reacting with Lithium , 2007 .

[18]  James F. O'Brien,et al.  Eurographics/ Acm Siggraph Symposium on Computer Animation (2006) Generating Surface Crack Patterns , 2022 .

[19]  Prashant N. Kumta,et al.  Interfacial Properties of the a-Si ∕ Cu :Active–Inactive Thin-Film Anode System for Lithium-Ion Batteries , 2006 .

[20]  Mo-hua Yang,et al.  Effect of electrode structure on performance of Si anode in Li-ion batteries: Si particle size and conductive additive , 2005 .

[21]  T. D. Hatchard,et al.  In Situ XRD and Electrochemical Study of the Reaction of Lithium with Amorphous Silicon , 2004 .

[22]  Markus H. Gross,et al.  Interactive Virtual Materials , 2004, Graphics Interface.

[23]  Mark N. Obrovac,et al.  Structural changes in silicon anodes during lithium insertion/extraction , 2004 .

[24]  C. C. Ahn,et al.  Highly Reversible Lithium Storage in Nanostructured Silicon , 2003 .

[25]  James F. O'Brien,et al.  Graphical modeling and animation of ductile fracture , 2002, SIGGRAPH '02.

[26]  Kevin W. Eberman,et al.  Colossal Reversible Volume Changes in Lithium Alloys , 2001 .

[27]  Pattern formation and selection in quasistatic fracture. , 2000, Physical review letters.

[28]  Martin Winter,et al.  Electrochemical lithiation of tin and tin-based intermetallics and composites , 1999 .

[29]  Mitsugu Matsushita,et al.  Fragmentation of Long Thin Glass Rods , 1992 .