Parametric optimization of wire electrical discharge machining on aluminium based composites through grey relational analysis

Abstract Wire Electrical Discharge Machining (WEDM) is an advanced machining process, which is suitable for making complex shapes in conducting materials including metal matrix composites (MMCs). In the present work, an analysis has been made to optimize the process parameters such as peak current, pulse on time, wire feed rate and wt.% of Boron Carbide (B 4 C) that affect the output responses, namely, kerf width ( K ) and surface roughness (SR), through the Grey Relational Analysis (GRA). Aluminium (6351) alloy reinforced with 5 wt.% Silicon Carbide (SiC) and 0, 5, 10 wt.% of B 4 C prepared through the stir casting process was used for the evaluation. The experimental results show that the optimal combination of process parameters were peak current of 12 A, pulse on time of 100 μs, wire feed rate of 6 m/min and B 4 C content of 5 wt.%. The influence of the pulse on time is found to be more in affecting the combined objective with a contribution of 96.19%. The crater formation on the machined surface of the composite at optimum condition was also examined through the Scanning Electron Microscope (SEM).

[1]  Ganesh G. Dongre,et al.  Modeling of silicon ingot slicing process by wire–electrical discharge machining , 2013 .

[2]  A. Haq,et al.  Multi response optimization of machining parameters of drilling Al/SiC metal matrix composite using grey relational analysis in the Taguchi method , 2008 .

[3]  M. S. Shunmugam,et al.  Data mining applied to wire-EDM process , 2003 .

[4]  B. Yan,et al.  Examination of wire electrical discharge machining of Al2O3p/6061Al composites , 2005 .

[5]  J. Celis,et al.  Tribo-surface characteristics of Al-B4C and Al-SiC composites worn under different contact pressures , 2006 .

[6]  M. Uthayakumar,et al.  Electrical Discharge Machining of Al(6351)–SiC–B4C Hybrid Composite , 2014 .

[7]  Yunn-Shiuan Liao,et al.  Optimization of machining parameters of Wire-EDM based on Grey relational and statistical analyses , 2003 .

[8]  M. S. Shunmugam,et al.  Multi-objective optimization of wire-electro discharge machining process by Non-Dominated Sorting Genetic Algorithm , 2005 .

[9]  Reza Kashiry Fard,et al.  Experimental investigation, intelligent modeling and multi-characteristics optimization of dry WEDM process of Al–SiC metal matrix composite , 2013 .

[10]  K. Kalaiselvan,et al.  Production and characterization of AA6061–B4C stir cast composite , 2011 .

[11]  P. Asokan,et al.  Drilling of hybrid Al-5%SiCp-5%B4Cp metal matrix composites , 2010 .

[12]  Wei Zhou,et al.  Casting of SiC reinforced metal matrix composites , 1997 .

[13]  T. Muthuramalingam,et al.  A review on influence of electrical process parameters in EDM process , 2015 .

[14]  M. Uthayakumar,et al.  Electrical discharge machining of Al (6351)-5% SiC-10% B 4 C hybrid composite: a grey relational approach , 2014 .

[15]  K. Kanlayasiri,et al.  Effects of wire-EDM machining variables on surface roughness of newly developed DC 53 die steel: Design of experiments and regression model , 2007 .

[16]  P. Brahmankar,et al.  Some investigations into wire electro-discharge machining performance of Al/SiCp composites , 2006 .

[17]  R. Ramakrishnan,et al.  Multi response optimization of wire EDM operations using robust design of experiments , 2006 .

[18]  M R Soleymani Yazdi,et al.  Optimization of process parameters in wire electrical discharge machining of TiB2 nanocomposite ceramic , 2011 .

[19]  D. Kondayya,et al.  An integrated evolutionary approach for modelling and optimization of wire electrical discharge machining , 2011, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

[20]  M. Uthayakumar,et al.  Investigation on the machining studies of AA6351-SiC-B4C hybrid metal matrix composites , 2014 .

[21]  Arshad Noor Siddiquee,et al.  Multi-response optimization of wire electrical discharge machining process parameters for Al7075/Al2O3/SiC hybrid composite using Taguchi-based grey relational analysis , 2015 .